Catda PWM Mini Cooling Fan Hat Argon Speed Control GPIO Fans with Copper Metal Base Radiator for Raspberry Pi 4 Model B
$17.98
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
The Argon mini cooling fan specially designed for Raspberry Pi 4, pure copper metal base radiator, pure copper material is the best heat dissipation material, it is the perfect combination of cooling fan and radiator. Improve the operating speed and service life of the motherboard CPU, so you don’t have to worry about the inconvenience caused by the motherboard overheating during use! In addition, the cooling fan also has a switch, you can decide whether to use the fan at will, you don’t need to manually plug and unplug the GPIO interface like a traditional fan. Even if the fan is turned off, the copper heat sink base can still perform heat dissipation for you. Please note:In PWN mode, the Raspberry Pi mini PWN cooling fan with adjustable speed will only rotate more than 55 degrees by default
How to installl Argon Mini Fan
Connect the Argon Mini Fan to your Raspberry Pi 4
Don’t power your Raspberry Pi yet
1. Place Silicon Thermal Pad on the CPU of the Raspberry Pi.2. Make sure that the header of the Argon Mini FAN HAT is aligned with physical PINS 1-12 of the Raspberry Pi.3. Check if the HEAT SINK of the Mini FAN is in contact with the Raspberry Pi CPU.
SET MODE OF THE ARGON MINI FAN
1. ON – Mini FAN will always turn ON when the Raspberry Pi is powered.2. OFF – Turns OFF the Mini FAN3. PWM – Sets the Mini FAN into a Pulse Width controllable mode.
SETTING THE PWM SETTINGS
1. In Raspbian, open the Terminal App2. Go To the root directory and Open the/boot/config.txt file3. Open and edit the ‘config.txt’ file by typing:sudo nano config.txt4. Add the line:.dtoverlay=gpio-fan,gpiopin=1 8,temp=550005. Save changes and exit by pressing Ctrl+X
This setting will start the Mini Fan at CPU Temp 55 degrees Celcius (temp= 55000). You may set your desired fan initiation temperature as you desire.
Package List
1 ≠ Argon Mini Fan( Not Include the Raspberry Pi ! )
Weight | 0.1 kg |
---|
Customers Also Viewed
USR-ES1 W5500 Chip SPI to LAN Ethernet Converter TCP/IP Module WIZ820io
$15.30Converter BoardAdd to cart>>>Manual:Click here to openOverviewUSR-ES1 embeds Wiznet’s W5500 chip, which uses hardware logic gates to implement the transport layer and network layer of the TCP/IP protocol stack (such as TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE, etc.), and integrates The data link layer, physical layer, and 32K bytes of on-chip RAM serve as data transceiving buffers. …
USR-ES1 W5500 Chip SPI to LAN Ethernet Converter TCP/IP Module WIZ820ioRead More
3pcs TEC1-12715 12V Heat Sink thermoelectric Cooler Peltier Plate Module
$32.04Electronic Accessories & SuppliesAdd to cart40 x 40mm TEC1-12715 12V Heatsink Thermoelectric Cooler Peltier Plate ModuleDescriptionSolid state, vibration free, noise-freeSimple to install and operateThe hot surface need to be good heat sinkSpecificationProduct name:thermoelectric cooler plate moduleModel:TEC1-12715Color:whiteCouples:127Voltage:12VUmax:15.4VImax:15AMax power consumption:231WTmax:70°CQcmax T=0(W):137WSize:40 x 40 x 3.3mmWeight:50gPackage included3 x TEC1-12715 cooler plate module
EQKIT KM-1 DC 6-12V PWM Motor Speed Controller Kit DIY Motor Speed Regulator Set Stepless Speed Control
$8.73Module KitsAdd to cartSpecificationsModel:KM-1Operating voltage:DC 6-12VPCB board size:40 x 40mmCircuit descriptionKM-1 uses PWM (pulse width modulation) to control the speed of the motor, adjust the pulse width duty ratio, so that the speed from zero to the maximum speed stepless speed regulation. The wider the crest width of the control waveform, the faster the motor speed; on the …
20pcs 63V 10000UF 105 High Frequency Temp Electrolytic Capacitor 30mm x 50mm Long Life
$108.62Electronic Accessories & SuppliesAdd to cartSpecificationModel:485622Voltage:63VCapacitance:10000UFTemperature:105→Diameter:30mm / 1.1 inchHeight:50 mm / 2 inchFeaturesLong life, high temperatureHigh-frequency capacitorsPackage included20 x Electrolytic Capacitor
Reviews
There are no reviews yet.