RIDEN 100V/20A 7in1 OLED Multifunction Tester Voltage Current Time Temperature Capacity Voltmeter Ammeter Electrical Parameter Meter
$26.23
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Technical Parameters
Voltage measurement range:DC00.0-99.9V Current measurement range:DC00.0-20.0A
Time measurement range:0-99h59min Power measurement range:0-999.9-2000 W
Temperature measurement range:-15 °c ~60°c Capacity accumulation range:0-999.99-9999.9 Ah
Energy accumulation range:0-99999Wh-9999KWh Voltage measurement accuracy:± (0.5% + 2digits)
Current measurement accuracy:± (1% + 2 digits) Product weight:33g
Product size:48mm*29mm*22mm (L*W*H)
Display Interface Instruction
↘Run time
Power display
Data set
Temperature display
Capacity display
Voltage display
Current display
№Energy display
Button Function Instruction
This tester has 0 and 1 two data groups; and data groups are switched by pressing the key.
When data group is the 1 group, the current capacity and energy will be stored after power off.
And the stored values will be accumulated after power on. When the data group is the 0 group,
the current capacity and energy will be stored after power off; when power on next time,
the stored capacity and energy are blinking displayed. But when the new capacity is up to 0.01Ah,
the stored capacity and energy will be covered, and the values will start over. At the two data groups,
the accumulated values can be cleared to zero by keeping pressing the key.
Zero calibration operation
With the aging of components and influence of ambient temp, there might be tiny error for the current reading,
especially when measuring low current. To calibrate it:1, power off the meter.2, disconnect the load.
3 press and hold the front button .4, power on the meter.5, release the button when you see “AAA Inch on the screen.
Done
The Wiring Diagram Instruction
↘Red thin line
Black thin line
Yellow thin line
Red thick line
Black thick line
Load
Please ensure proper wiring in strict accordance with the wiring diagram.
Using Isolated Power Supply to power the meter
The two power supplies must be isolated and don’t have any connections between them.
The voltage of the isolated power supply must be less 60V
Using system to power the meter
The black thin wire connects nothing and you should use insulator wrap it to avoid short circuit.
Using DC-DC converter to power the meter
The black thin wire connects nothing and you should use insulator wrap it to avoid short circuit.
The DC-DC converter must be common cathode structure.
Package included
1 x 100V/20A 7in1 OLED Multifunction Tester
Weight | 0.033 kg |
---|
Customers Also Viewed
DC 0-300V 500A Voltage Current Panel Meter Digital Blue Red Dual LED Voltmeter Ammeter with 500A/75mV Shunt
$48.10Electronic Accessories & SuppliesAdd to cartFeatures-2 in 1 function Voltmeter Ammeter, Easy install.-This meter test of Voltages and Amps, power supply can taken from the test circle, no additional power supply-Power supply DC 4.5V – 30V range (Attention:The maximum of input voltage cannot be exceed of 30V, otherwise would be burnt)-Display Range:DC 0V – 300V 0-500A (Please don’t exceed the …
3Pcs AC 220V 50A Power Amplifier Filter Power Supply Eliminate DC Power Filters for Toroidal Transformer
$28.05Module ComponentsAdd to cartProduct DescriptionThis product is connected in series with AC220V live wire. A 50A high-current rectifier bridge is used in series to eliminate the DC component more thoroughly.It can effectively eliminate the abnormal noise of the transformer caused by the DC component in the power grid (especially the sound of the toroidal transformer).Size:65MMX60MMx28MMType:Plug-in typePackage included3Pcs Filter …
5V WiFi Remote Garage Door Opener Controller Work with Alexa & IFTTT Google home Wireless Remote Control Switch
$21.86Smart ModuleAdd to cartNew toy for makers who want to build their own smart home system OverviewThe wireless switch supports inching /self-locking mode. You can add the device to the APP eWeLink to remote control connected home appliances or devices. In self-locking mode, you can remote turn on/off connected devices immediately. When in inching mode, you have two …
10pcs 3.7V 9V 5V 2A Adjustable Step Up 18650 Lithium Battery Charging Discharge integrated Module
$20.24Boost & Buck ModuleAdd to cartFeatureInput voltage:4.5-8VOutput voltage:continuous adjustable 4.3-27V (Counter clockwise to boost voltage)Charging voltage:4.2V Charging current:up to 1ADischarge current:the maximum 2AOutput reference maximum current:5V 1.4A, 9V 0.8A, 12V 0.6AQuiescent current:about 0.5 mAOvershoot protection:YesOver discharge protection:None (also can be said yes, because 2V cut-off boost but does not block the output, output has 2V)Deadline boost:2V, depending on whether added …
Reviews
There are no reviews yet.