RIDEN 100V/20A 7in1 OLED Multifunction Tester Voltage Current Time Temperature Capacity Voltmeter Ammeter Electrical Parameter Meter
$26.23
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Technical Parameters
Voltage measurement range:DC00.0-99.9V Current measurement range:DC00.0-20.0A
Time measurement range:0-99h59min Power measurement range:0-999.9-2000 W
Temperature measurement range:-15 °c ~60°c Capacity accumulation range:0-999.99-9999.9 Ah
Energy accumulation range:0-99999Wh-9999KWh Voltage measurement accuracy:± (0.5% + 2digits)
Current measurement accuracy:± (1% + 2 digits) Product weight:33g
Product size:48mm*29mm*22mm (L*W*H)
Display Interface Instruction
↘Run time
Power display
Data set
Temperature display
Capacity display
Voltage display
Current display
№Energy display
Button Function Instruction
This tester has 0 and 1 two data groups; and data groups are switched by pressing the key.
When data group is the 1 group, the current capacity and energy will be stored after power off.
And the stored values will be accumulated after power on. When the data group is the 0 group,
the current capacity and energy will be stored after power off; when power on next time,
the stored capacity and energy are blinking displayed. But when the new capacity is up to 0.01Ah,
the stored capacity and energy will be covered, and the values will start over. At the two data groups,
the accumulated values can be cleared to zero by keeping pressing the key.
Zero calibration operation
With the aging of components and influence of ambient temp, there might be tiny error for the current reading,
especially when measuring low current. To calibrate it:1, power off the meter.2, disconnect the load.
3 press and hold the front button .4, power on the meter.5, release the button when you see “AAA Inch on the screen.
Done
The Wiring Diagram Instruction
↘Red thin line
Black thin line
Yellow thin line
Red thick line
Black thick line
Load
Please ensure proper wiring in strict accordance with the wiring diagram.
Using Isolated Power Supply to power the meter
The two power supplies must be isolated and don’t have any connections between them.
The voltage of the isolated power supply must be less 60V
Using system to power the meter
The black thin wire connects nothing and you should use insulator wrap it to avoid short circuit.
Using DC-DC converter to power the meter
The black thin wire connects nothing and you should use insulator wrap it to avoid short circuit.
The DC-DC converter must be common cathode structure.
Package included
1 x 100V/20A 7in1 OLED Multifunction Tester
Weight | 0.033 kg |
---|
Customers Also Viewed
60V 17S 45A Li-ion Lithium Battery Protection Board BMS PCB System
$45.75Battery Protection ModuleAdd to cartNote:The protective plate cannot be used in parallel.SpecificationsContinuous discharging current:45AInstantaneous diacharge current:100ACharging voltage:67.2VCharging current:45AOver-charge detect:4.28±0.05VProtect delay:100msOver-charge release:4.08±0.05VBalanceDetect voltage:4.2±0.025VRelease voltage:4.2±0.05VBalance current:60±5mAOver-discharge:2.55±0.08VOver-discharge detect delay:50mSRelease voltage:2.9±0.1VDetect voltage:150mVDetect delay:15mSCurrent detect:130±10AResistance:≤15mΩWorking current:≤60uASleep current (when over-discharge):≤10uAWorking temperature:-30~80→Size:120 x 60 x 9mm:Details:Specification:Unit:RemarkCharge:Charging voltage:71.4:VRecharging current:45 (max):ADischarge:Continuous discharge current:45 (max):AInstantaneous discharge current:150 (max):AOvercharge protection:Overcharge detection voltage:4. 25 ±0.025:V:Single coreOvercharge protection delay:100:mSOvercharge release voltage:4. 05 …
60V 17S 45A Li-ion Lithium Battery Protection Board BMS PCB SystemRead More
25W 5V Foldable Solar Panel Solar Power Bank Pack with Dual USB Port for Backpack Camping Hiking
$78.68Smart Robot & Solar PanelAdd to cartFeatures∵ High-Efficiency Ponocrystalline Cell, up to 19%.∵ Eco-friendly & durable material.∵ Applied in charging 5V device as a power bank.∵ Portable, foldable and lightweight, with buckle to be fold firmly.∵ Produce continuous stable output even in cloudy day.∵ Suitable for outdoor activities, outdoor working or emergency.ParametersPmax:25WUSB Output Voltage:5VUSB1 Output Current:2000mA USB2 Output Current:1200mAQuantity of Single …
3Pcs Original Hiland DIY Multifunction Transistor Tester Kit for LCR ESR PWM Generator M328
$66.77DIY Electronic KitsAdd to cart3Pcs DIY Multifunction Transistor Tester Kit For LCR ESR Transistor PWM Signal Generator M328FeatureA key measurement operation , auto power off delay . Shutdown current is only 20nA, support battery operation.Automatic detection PNP and NPN type bipolar transistors , N, P -channel MOSFET, JFET FET , diodes , two diodes, thyristors , resistors , capacitors …
3Pcs Original Hiland DIY Multifunction Transistor Tester Kit for LCR ESR PWM Generator M328Read More
5pcs 2 Slots AAA Battery Box Battery Holder Board with Switch for2xAAA Batteries DIY kit Case
$9.36Other Module BoardAdd to cartSpecificationsSupport Model:AAA BatteryShell material:ABS Cable:1007 (150mm)Metal spring:carbon steel nickel plating by NCAA salt spray test, stainless steel spring.Size:53*24*13 mmPackage Included5 x 2 Slots AAA Battery Holder Plastic Case Storage Box
10pcs Low 3.5ohm PCA9306 Dual Bidirectional Voltage-Level Conversion Module Converter
$86.01Sensor & Detector ModuleAdd to cartDescriptionThis is a conversion board for the PCA9306 dual bidirectional voltage-level translator. Because different parts sometimes use different voltage levels to communicate, voltage level translators can be the key to making different parts play nice.The PCA9306 is a dual bidirectional I2C-bus and SMBus voltage-level translator that’s operational on the low side from 1.0 V to …
10pcs Low 3.5ohm PCA9306 Dual Bidirectional Voltage-Level Conversion Module ConverterRead More
5pcs Delay Timer Switch Adjustable 0-10sec with NE555 Electrical input 12V 10A
$18.51Relay ModuleAdd to cartDescriptionTiming from Microseconds to HOURSSimple CircuitryPrecision Pulse Generation / Timing,FMAX = 500 KHzUse a single 4 to 16 VDC supplyExcellent temperature stability 0.005% / °CAdjustable Duty CycleCountless Application and Information SourcesChip (NE555) CharacteristicWhen unconnected with the supply power, the state of the module is inchNOinch [ normal open ], CB and COM are conductive. CK …
5pcs Delay Timer Switch Adjustable 0-10sec with NE555 Electrical input 12V 10ARead More
Reviews
There are no reviews yet.