DC 300V 50A Digital Voltmeter Ammeter DC VOLT AMP Tester Gauge with Red and Green Led No Shunt with Back Cover 0.39 LED
$18.35
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Technical Parameters
Supply voltage (non-isolated meter):DC3.5 ~ 30V (wide range),
Note:The maximum input voltage can not exceed 30V, otherwise it will be burned
Isolation meter (isolated power supply meter):DC8-18V
Operating Current
Display:0.39 inchLED, voltage – red, Current – Green
Dimensions:70 * 40 * 30 mm
Installation hole:68 * 38 mm
Measurement rate:≥500mS / times
Accuracy:1% (± 1 word)
Extreme working conditions
Min. supply voltage:+ 3.5V
Max. supply voltage:+ 30V
Working temperature:-10 ~ + 65
Operating Humidity:10 ~ 80% (non-condensing)
Working pressure:80 ~ 106kPa
Sunlight:no direct exposure
Power meter:Two line socket
Thin – Black Line:Header supply Negative
Thin – Red line:Header supply positive
(Note:voltage between red and black lines can’t exceed 30V)
Test side:Three line socket
COM:Test Common
V +:Test positive voltage input
A +:Test inchpositiveinch current input; check the drawing before install or it will burn. Because the header by co-design, which means the earth wire of test and power supply is interlinked,so only can be connected to between the negative power supply and the negative of the tested device
(We recommend to link the yellow line and the black lines together, to prevent outside interference caused by digital ammeter flashing)
Package included
1 x Digital Voltmeter Ammeter
Weight | 0.066 kg |
---|
Customers Also Viewed
R414A01 RS485 Modbus RTU Temperature and Humidity Sensor Module DHT12 for indoor and Outdoor Room Computer Room Farm
$26.23Sensor & Detector ModuleAdd to cartClick here to download document:R414A01FeaturesWorking voltage:DC 5-23VWorking current:8MA(12V)MODBUS RTU protocol,03 Read,06Write.Serial baud rate:9600(default),N,8,1By modifying the RS485 address, up to 247 module s can be connected (more than 16 US ether485 repeater)Temperature and humi dity sensor is DHT12The voltage conversion module is CE018,a High-efficiency and Low-heat voltage ConverterSize:Module is 45 X 30 X 27MM,Shell is 50 …
20pcs WITRN-POW001 Multi-function Adapter Board Voltage and Current Measurement for Type-C USB A USB C MiniUSB MicroUSB 3.5 DC 5.5×2.1 DC 5.5×2.5 DC
$23.27Converter BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Support Multiple Interface ConverterUSB AUSB CMiniUSBMicroUSB3.5 DC5.5×2.1 DC 5.5×2.5 DCPackage Included20 x WITRN-POW001 Multi-function Adapter Board
50pcs 270uF 16V 8x8mm Low ESR 16V270uF for Motherboard VGA Solid Capacitor
$16.47Electronic Accessories & SuppliesAdd to cartDescriptionLow ESR, high ripple current capabilityESR 5mΩ max (2 to 4VDC)Longer life(20000 hours at 106 Celsius)Rated voltage:2 to 16VDCCategory temperature:-55 to +105 CelsiusTolerance:+/-20%(M)Package included50 x Solid Capacitors
Keyes Brick DS1302 Real-time Clock Sensor Module Compatible with Micro Bit
$4.93Sensor & Detector ModuleAdd to cartSpecificationWorking voltage:DC 3.3-5VInterface:5pin interfaceWorking Temperature:0→–70→Battery CR2032 (not included)Size:36*22*6mmWeight:3.6gPackage included1 x DS1302 Clock Sensor Module(the other items are not includes)
M5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer + M5Stack PowerC HAT Design for M5StickC with IP3005 and IP5209 Power Bank Battery Charger Board
$65.60Motherboard & Development BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.This is without watch accessories,If you like with watch accessories>>>with watch accessories:Click here to BUY>>>More M5Stack Item:Click here to openDescriptionM5Stick is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, …
Reviews
There are no reviews yet.