DC 12V/24V 30A Waterproof Wind Generator Charge Controller 400W/800W Wind And Light Hybrid Controller
$141.74
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Name:12V/24V 400W/800W Waterproof Wind And Light Hybrid Controller
Model:B56569
Material:Aluminium Alloy
Application:Wind Power Photovoltaic Controller
Color:Black
Product Model:ECO-400
Battery Nominal Voltage:DC12/24V
Rated Power of Wind Turbine:400W(12V)/800W(24V)
Lock Voltage of Wind Turbine:14.5V/29V
Recovery Voltage of Wind Turbine:13.2V/26.4V
Rated Solar Power:500W(12V)/1000W(24V)
Maximum Discharge Current:30A
Static Power:15mA
Working Temperature:-35~+75℃
Size:approx. 130mm*82mm*21mm
Product Weight:approx. 365g
Level of Protection:IP67
Features
– This product is a smart controller that combined solar energy controlling and wind energy controlling. It is designed for high-end small Wind & Photovoltaic hybrid system, especially suitable for wind-photovoltaic hybrid power generation system and wind-photovoltaic hybrid monitoring system. It can control the wind turbines and solar panels simultaneously to charge the battery safely and efficiently. The device has a nice appearance, clear instructions and convenient operation. It also has a comprehensive series of protective measures.
Performance
– Reliability:Intelligent, modular design, simple structure, powerful functions; Industrial grade high-quality components and strict manufacturing techniques, which is suitable for relatively harsh working environments such as low temperature. It also has reliable performance and long service life.
Mode of Connection
1. Firstly, connect the positive pole of the load, battery, and solar panel to the red line of the controller.
2. Then connect to the load’s yellow wire of the negative pole.
3. Then connect the negative pole of the battery to the black line of the controller.
4. Connect the negative pole of the solar panel to the blue line of the controller.
5. Connect the three-phase AC voltage input line of the controller to the three-phase voltage output line (green line) of the wind turbine.
6. After the entire connection is completed, please wrap the connectors with waterproof tape to avoid water ingress.
Indicator Light Conditions
1. Battery capacity, discharging indicator (Light on indicates the battery condition)
2. Solar charging indicator (Light on indicates charging)
3. Controller power-on indicator (Light on indicates the battery is connected properly)
4. Brake, fault,overcharge,protection (Light on indicates warning condition)
5. Fan charging indicator (Light on indicates the fan is working)
Package Included
1X Wind And Light Hybrid Controller
1X Manual
Weight | 0.401 kg |
---|
Customers Also Viewed
Multiple Car Toys Magnetic Puzzle Box Book Educational Book Kids Learning Gift
$52.64MathematicsAdd to cartPackage included10 x Card76 x MagnetsFeatures1.Developing kids’ intelligence.2.Teaching kids to know more words.3.Easy for storage.SpecificationsColor:MulticolorMaterial:Paperboard, MagnetismSize:30x4x21.5cm
Basic Starter Kit UNO R3 Mini Breadboard LED Jumper Wire Button with Box for Geekcreit for Arduino – products that work with official Arduino boards
$18.62Module KitsAdd to cartDescriptionsPerfect for Shield Prototyping and TestingPlastic housing, metal contact clipsAccept wire with diameter 20-29AWGVolatge/current:300V/3-5A400 tie-point2 Power Lanes, Tie-point 1001 Double-strip, Tie-point 300Solderless Breadboard Size:82x55x8.5mmPackage included1 x Uno R3 Development Board1x 400 hole Breadboard10 x 220Ω resistor 5% carbon film10 x 1k resistor 5% carbon film10 x 10k resistor 5% carbon film10 x 100k resistor 5% …
3pcs ESP32-S WiFi + Bluetooth ESP32S Serial to WiFi Dual Antenna Module
$29.27Smart ModuleAdd to cartDescriptionThe main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and computing power of up to 600DMIPS.Default 32Mbit SPI Flash, 520KB SRAMSupport SoftAP and Station modeUltra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleSupport UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.Support for firmware upgrade (FOTA)Antenna supports onboard antenna or IPEX block outputPackage includes3 x Wifi module
Geekcreit 433MHz DC 12V 10A Relay 1CH Channel Wireless RF Remote Control Switch Transmitter with Receiver
$15.30Smart ModuleAdd to cartIf you need more Transmitter, please buy Product ID:1215079>>>Manual:Click here to openFeaturesEasy to install and easy to carryWith a slidable cover on the remote controlWith a hook on the remote controlUse Learning coding, stable and reliableThe wireless signal can pass through walls, floors and doorsYou can turn on or turn off the receiver with transmitter …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStream
$56.69Electrical Pump & ValveAdd to cartFeature*CO2 Refill Adapter is used to fill CO2 into your Sodastream tank.*Adjustable valve pin ensures compatibility with any cylinder valve variation.*Easy to install and use.*Made of high quality metal, high hardness and durable.Specification*Material:Metal*Color:Silver (As Pictures Show)*Inner Thread:TR21-4*Outer Thread:W21.8-14Package Contents1*CO2 Refill AdapterNotes:The real color of the item may be slightly different from the pictures shown on …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStreamRead More
30pcs 2.5-5.5V TTP223 Capacitive Touch Switch Button Self Lock Module
$15.15Other Module BoardAdd to cartFeatures 1. Size:15*11mm 2. Power:2.5-5.5V 3.Trigger setting mode:(1->Short;0->No Short) AB=00:No-lock High TTL level output; AB=01:Self-lock High TTL level output; AB=10:No-lock Low TTL level output; AB=11:Self-lock Low TTL level output; Package included 30 x 2.5-5.5V TTP223 Capacitive Touch Switch Button Self-Lock Module For
NE555 Pulse Module LM358 Duty and Frequency Adjustable Square Wave Signal Generator Upgrade Version
$6.55Test & Measuring ModuleAdd to cartFeature1. Used as a square wave signal generator to generate square wave signals for experimental development.2. Used to generate a square wave signal that drives the stepper motor driver.3. Generate adjustable pulses for use by the MCU.4. Generate adjustable pulses to control the associated circuitry.Description1. Size:3.5CM * 4.6CM1. The main chip:LM358;2. Input voltage:5V-12VDC.3. Input current:≥100MA;4. …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module Kit
$13.73DIY Electronic KitsAdd to cartFeatureModel:AUL-10Supply voltage:DC9V-12VAudio input:0~1.5VrmsPCB size:66 x 28mm (L x W)Light row size:62.5 x 5 x 10.7mm (L x W x H)Two indication modes:bar indication and fire spot indication (Realized by MOD short-circuit point)Lamp row offers two kinds of vertical and horizontal installationTin-treated solder padsNote:Before power on, please confirm the polarity of the power supply is correct …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module KitRead More
Reviews
There are no reviews yet.