AC110V/220V to DC5V 40A 200W with Fan Switching Power Supply 200*110*50mm
$54.66
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Technical Parameters
Project:Technical indicators:Remarks
Basic requirements:5V 40A 200W:Common (With fan)
Dimensions:200*110*50mm
Operating temperature:-10°C to +50°C, 20% to 95% RH (no condensation)
Storage temperature:-20°C to +85°C, 20% to 95% RH (no condensation)
Temperature Coefficient:0.02~0.05%/°C
Heat dissipation method:Fan assisted cooling
Rated voltage range:220VAC:AC
Input voltage range:110/240V:AC
Input frequency range:50~60Hz:Except DC input
Input undervoltage protection:115 to 150% intermittent mode
Input undervoltage recovery:Automatic recovery
Input overvoltage protection:115 to 150% intermittent mode
Input overvoltage recovery:Automatic recovery
Electric shock:≤1%:Maximum input voltage full load
Machine efficiency:≤0.5%:Rated input full load
Output voltage range:5V ± 0.5%:Three channel output
Output current:40A:Three channel output
Ripple and noise:≤150 mVp-p
Rise Time:≤50 ms
Output delay:≤5 S
Voltage regulation:≤0.5%
Load Regulation:≤1%
Output overcurrent protection:Current drooping
Output short circuit protection:IGBT
Output overvoltage protection:Soft start protection
Input to output:>30MΩ
Input to the earth:>30MΩ
Output to the earth:>30MΩ
Insulation resistance:>50MΩ
MTBF:100,000H
Feature
1. International AC input range
2. High efficiency, low working temperature
3. Short circuit,overload,over-current protection
4. 100% fully load burn-in test
5. Built-in EMI filter, low ripple noise
6. Low cost, high reliability
7. CE and FCC approval
Specification
1. LED switching power supply using pulse width modulation (PWM) switching technology designed to ensure power supply stability and high efficiency.
2. Product interference, through the EMC testing, ripple ≤ 50MV.
3. Efficiency above 80%, temperature ≤ 25 °C.
4. LED switching power supply with overvoltage protection, short circuit protection, overload protection.
5. Constant current output to ensure the stability of the power, so that LED lighting effects better and live longer.
6. Products have the anti-interference ensures long-life LED strips, reducing the LED lighting decline.
Package includes
1 x Power supply
Weight | 0.753 kg |
---|
Customers Also Viewed
3pcs JDY-10 bluetooth 4.0 Module BLE bluetooth Serial Port Module Compatible with CC2541 Slave
$16.47Other Module BoardAdd to cartDescriptionModel:JDY-10 bluetooth 4.0 slave moduleKernel:M0Communication interface:serial portWorking voltage:1.9-3.6VCommunication distance:100 metersWorking current:90uaSuspen mode:14 uAModule is:bluetooth 4.0 slaveJDY-10 transparent transmission module is based on bluetooth 4.0 protocol standard, working frequency range is 2.4GHZ range, modulation mode is GFSK, maximum transmission power is 8db, maximum transmission distance is 80 meters, low power consumption, small size, strong signal, data …
Plug&Play GPIO Expansion Board for Micro:Bit Open Development Board
$17.74Raspberry Pi & Orange PiAdd to cartOverviewThis is the Micro:bit GPIO Expansion board, it’s convenient to use micro:bit board; You can insert the expansion board directly into the micro:bit;You can cascade this expansion board.SpecificationsWeight:15gSize:6.4 x 3.7 x 1.2cmNotesThe micro:bit board is not included.Package Included1x Expansion Board
10pcs W25Q32 Large Capacity FLASH Storage Module Memory Card SPI interface BV FV STM32
$16.08Other Module BoardAdd to cartSpecificationsCapacity:32M-bit / 4M-byteThe clock frequency is less than 104MHzOperating voltage:2.7~3.6VSize:14mm * 15mmFeaturesUsing serial nor flash external expansion memory chip w25q64Support SPI InterfaceProvide STM32 test codePackage Included10 x W25Q32 Large Capacity FLASH Storage Module
HMC849 RF Switch Module Single Pole Double Throw 6GHz Bandwidth High Isolation
$29.75RF amplifierAdd to cartParameterPower supply voltage:3-5VOperating frequency range:6GHZInsertion loss and isolation refer to the following S21 parametersModule size:2.5*3cm (without protruding SMA part)Input and output impedance:50┯Input and output SMA interface (outer spiral inner hole)Product weight:10 gPackage included1 x HMC849 RF Switch Module
0.1-2000MHz RF Amplifier Wideband High Gain 30dB Low Noise Amplifier LNA Broadband Module Receiver
$21.86Amplifier BoardAdd to cartFeaturesThis product with wide frequency range, high gain, low noise figureThis product can be applied to various rf receive front-end and increases the communication distanceUsed for Short wave, FM radio, remote control receiver, such as cable TV signal amplifier need low noise RF signal amplificationSpecificationsSize:25*52mmDiameter of end:5mmColor:green + goldOperating frequency:0.1-2000MHzAmplifier gainF=0.1MHz, gain=32dBF=500Mhz, gain=31dB F=1000MHz, gain=29dBF=1500Mhz, …
RC Resistance Surge Absorption Circuit Relay Contact Protection Circuit Electromagnetic
$6.55Other Module BoardAdd to cartOverviewRC absorption circuit module used on protecting the relay or thyristor because it can avoid damage thatfrom inductive electromotive force generated by the inductive load when on or off. Preventing electromagneticinterference and increasing the anti-jamming capability of the microcontroller.Description1, For AC or DC 5 ~ 400V inductive load (less than 1000W), protection relay contacts or …
RC Resistance Surge Absorption Circuit Relay Contact Protection Circuit ElectromagneticRead More
50pcs USB To DIP Female Head Mini-5P Patch To DIP 2.54mm Adapter Board
$23.64Converter BoardAdd to cartDescriptionMini USB is one of the most common USB interfaces at present. Compared with the standard USB, Mini USB is smaller and suitable for small electronic devices such as mobile devices. It has a wide range of uses. This module is easily transformed into the conventional DIP 2.54mm pin, which greatly facilitates your application.Package included50 …
50pcs USB To DIP Female Head Mini-5P Patch To DIP 2.54mm Adapter BoardRead More
Reviews
There are no reviews yet.