RIDEN HD25/HD35 USB Electronic Load Digital Display Voltage Current Meter Battery Aging Detector
$37.17
Type2 HD35 / Type2 HD25 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Technical Parameters
Optional type:HD25:HD35
Rated operating voltage:DC4-25.0V
Maximum discharge power:25W:35W
Rated operating current:0.25-4.00A (0.05A starts when the fan is not started):0.25-5.00A (0.05A starts when the fan is not started)
Maximum fan speed:Oil bearing fan 5800±10%RPM:Hydraulic bearing fan 8000±10%RPM
Fast charge trigger mode:QC2.0 5V, 9V, 12V, 20V, QC3.0, FCP, AFC9V
Constant current accuracy:±(1%+3 words)
Heat dissipation method:Intelligent temperature control fan + all aluminum heat sink
Working temperature-10→-40→
Adjustment potentiometer:Precision multi-turn adjustable potentiometer
Display type:4-digit LED digital tube
Extension portsMicro USB interface, Type-C interface
Product weightabout 52g
Product size84 x 41 x 28mm
Application advice:Factory batch aging must use HD35
Load function
A. Protection function
OVP overvoltage protection (25V-30V overvoltage protection, permanent damage after 30V; after overvoltage protection, digital tube displays OVP)
OTP over temperature protection (If load temperature is greater than 80 °C, the output will automatically cut off, and the digital tube displays OTP)
OPP over power protection (If power is greater than 35W, the output is automatically cut off, and the digital tube displays OPP)
B. Set the load to resume normal operation manually or automatically after the protection condition is released.
C. View load voltage value, current value, power value
D. Intelligent temperature control fan, when the power is greater than 10W or the load temperature is greater than 40 °C, the fan starts automatically.
E. Precision adjustable potentiometer, which can accurately adjust the current to 0.01A, and will not damage the power supply due to excessive current error caused by hand error.
F. Freely set the load on state, the default is on or off.
Trigger/cheat function
1. Trigger function
The charger can be used for QC2.0, QC3.0, Huawei FCP, Samsung AFC 9V, and multiple fast charging modes for deception triggering.
2. Fast charge support detection function
Use the AUTO mode to detect the charger’s support for fast charge mode.
3. Power-on automatic trigger function
Power-on automatically triggers fast charging and automatically turns on the load, which is suitable for batch testing of aging chargers.
Q&A
Q:My charger has the largest nominal support QC2.0 12V2A How do I test if the charger supports it
A:Insert the load, long press the trigger button, after the red light of QC2.0 is on, short press “OK Inch button, the red light flashes, then press twice again to change to QC2.0 12V mode. Press and hold the trigger button to enter the load mode, press SET to check if the current voltage is around 12V. Turn on the load and slowly adjust the current to 2A. Check if the voltage drops significantly (>0.5V), then let the load work for a while and measure the heating of the charging head. If the load is restarted or the voltage drops and the charging head is heated rapidly, it means that the charging head cannot be loaded enough and must be derated.
Q:Is my PD2.0 supported
A:The load can age the PD charger, but it cannot be PD spoofed. The dual-head Type-C line connects the PD charger to the load, and the PD charger defaults to 5V. If the PD charger supports QC2.0 at the same time, high voltage aging can be achieved by tricking QC2.0.
Q:How do I want to release the fast charge fast charge
A:In the trigger mode, short press the trigger button to switch the mode to release; in the load mode, long press the trigger button to enter the trigger mode will be automatically released.
Application scenario
Auxiliary measurement Micro USB charging cable good or bad test auxiliary measurement Type-C
The test of the charging line is good or bad.
Charger factory batch aging test use
Package includes
1 x Battery Aging Detector
Weight | 0.052 kg |
---|
Customers Also Viewed
5pcs 3S NiMH NiCd Rechargeable Battery Charger Charging Module Board input DC 5V
$26.35Power Supply ModuleAdd to cartDescriptions3-Cell(3S) VersionInput voltage:DC 4.5V-5.5V(Recommend DC 5V)Charging voltage about:4.05V-5.1VCharging current about:230mA-240mAUSB power protectionShort circuit protection and zero volt battery activationBattery protectionOperating ambient temperature:-40° to +85°Storage temperature:-65° to +125°Size:30x 15 x 4mmNoteThe output voltage cannot be measured with a multimeter without a battery. But can be observed with an oscilloscope.Applicationskids toys carDigital CamerasSolar chargingBluetooth ApplicationsAudio equipmentDigital CameraElectronic …
5pcs 3S NiMH NiCd Rechargeable Battery Charger Charging Module Board input DC 5VRead More
5Pcs/Pack 5V 1000mA 165*165mm Monocrystalline Solar Panel Cells with Positive&Negative Cables
$85.54Smart Robot & Solar PanelAdd to cartFeaturesProvide you with high conversion rate and incredibly efficient output.Excellent performance even under the weak sunlight.Portable and solid casing.Application:to charge, for home lighting and different kinds of low-power appliances, for science projects, for solar powered water pump, small solar power system, etc.SpecificationsType:Monocrystalline Size:165*165mmCurrent:1000mA Net Weight:about 600g one packPackage Content:5Pcs x Poly Solar PanelVoltage:5VMPN:Does Not ApplyPackage …
Waveshare 1.54 inch ink Screen Module 152×152 Electronic Paper SPI interface Yellow Black and White 3-color Display
$45.91Display ScreenAdd to cartDocumentsSchematic:Click here to openSample tutorial:Click here to openDatasheet:Click here to openGithub:Click here to openFeaturesNo backlight is needed, and the display content of the last screen can be kept for a long time after power offVery low power consumption, basically only consumes power when refreshingSPI control interface, can be connected to Raspberry/Nucleo and other main control …
Geekcreit DIY Creative Electronic Watch Kit 51 Single-chip LED Digital Tube Clock Training Production Kit
$15.30DIY Electronic KitsAdd to cartDescriptionName:LED Electronic Watch KitPower supply:CR2025 3V button battery (available for testing, there are inevitably extra factors causing insufficient power.)Display:LED red digital tube displaySize:52*52*18mmInstallation:the board need to solder yourself and then assembly the caseFunction:You can press the digital tube button when need to wacth time; it will enter the power saving mode automatically after 5 seconds. …
QFN32 QFP32 Converter SMD To DIP Adapter PCB Universal Board
$3.56Expansion Board & ShieldAdd to cartQFN32 QFP32 Converter SMD To DIP Adapter PCB Universal BoardSpecificationDimension:20.25 x 40.64mm / 0.79inch x 1.60inchThickness:1.5mmPanel:FR4DescriptionThe PCB board has two sides.A side for pin pitch size 0.80mm, B side for pin pitch size 0.80mm.It can be used to convert QFN32/QFP32 (600mil width, 2.54mm pin pitch).You can solder filter capacitors or resistors to increase stability and …
QFN32 QFP32 Converter SMD To DIP Adapter PCB Universal BoardRead More
YJ0007 180W Car Stereo Audio Amplifier Power Boost Board Single 12V input Conversion Double 32V Output
$52.41Boost & Buck ModuleAdd to cartDescriptionAll parts and components of this product are original products, unpretentious and pure in quality; using high-quality original parts not only guarantees safety and quality, but also has a long service life, and more importantly, it is a strong guarantee that the actual performance can reach the design goals.Features1. All components are genuine.2. The main …
Reviews
There are no reviews yet.