RIDEN HD25/HD35 USB Electronic Load Digital Display Voltage Current Meter Battery Aging Detector
$37.17
Type2 HD35 / Type2 HD25 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Technical Parameters
Optional type:HD25:HD35
Rated operating voltage:DC4-25.0V
Maximum discharge power:25W:35W
Rated operating current:0.25-4.00A (0.05A starts when the fan is not started):0.25-5.00A (0.05A starts when the fan is not started)
Maximum fan speed:Oil bearing fan 5800±10%RPM:Hydraulic bearing fan 8000±10%RPM
Fast charge trigger mode:QC2.0 5V, 9V, 12V, 20V, QC3.0, FCP, AFC9V
Constant current accuracy:±(1%+3 words)
Heat dissipation method:Intelligent temperature control fan + all aluminum heat sink
Working temperature-10→-40→
Adjustment potentiometer:Precision multi-turn adjustable potentiometer
Display type:4-digit LED digital tube
Extension portsMicro USB interface, Type-C interface
Product weightabout 52g
Product size84 x 41 x 28mm
Application advice:Factory batch aging must use HD35
Load function
A. Protection function
OVP overvoltage protection (25V-30V overvoltage protection, permanent damage after 30V; after overvoltage protection, digital tube displays OVP)
OTP over temperature protection (If load temperature is greater than 80 °C, the output will automatically cut off, and the digital tube displays OTP)
OPP over power protection (If power is greater than 35W, the output is automatically cut off, and the digital tube displays OPP)
B. Set the load to resume normal operation manually or automatically after the protection condition is released.
C. View load voltage value, current value, power value
D. Intelligent temperature control fan, when the power is greater than 10W or the load temperature is greater than 40 °C, the fan starts automatically.
E. Precision adjustable potentiometer, which can accurately adjust the current to 0.01A, and will not damage the power supply due to excessive current error caused by hand error.
F. Freely set the load on state, the default is on or off.
Trigger/cheat function
1. Trigger function
The charger can be used for QC2.0, QC3.0, Huawei FCP, Samsung AFC 9V, and multiple fast charging modes for deception triggering.
2. Fast charge support detection function
Use the AUTO mode to detect the charger’s support for fast charge mode.
3. Power-on automatic trigger function
Power-on automatically triggers fast charging and automatically turns on the load, which is suitable for batch testing of aging chargers.
Q&A
Q:My charger has the largest nominal support QC2.0 12V2A How do I test if the charger supports it
A:Insert the load, long press the trigger button, after the red light of QC2.0 is on, short press “OK Inch button, the red light flashes, then press twice again to change to QC2.0 12V mode. Press and hold the trigger button to enter the load mode, press SET to check if the current voltage is around 12V. Turn on the load and slowly adjust the current to 2A. Check if the voltage drops significantly (>0.5V), then let the load work for a while and measure the heating of the charging head. If the load is restarted or the voltage drops and the charging head is heated rapidly, it means that the charging head cannot be loaded enough and must be derated.
Q:Is my PD2.0 supported
A:The load can age the PD charger, but it cannot be PD spoofed. The dual-head Type-C line connects the PD charger to the load, and the PD charger defaults to 5V. If the PD charger supports QC2.0 at the same time, high voltage aging can be achieved by tricking QC2.0.
Q:How do I want to release the fast charge fast charge
A:In the trigger mode, short press the trigger button to switch the mode to release; in the load mode, long press the trigger button to enter the trigger mode will be automatically released.
Application scenario
Auxiliary measurement Micro USB charging cable good or bad test auxiliary measurement Type-C
The test of the charging line is good or bad.
Charger factory batch aging test use
Package includes
1 x Battery Aging Detector
Weight | 0.052 kg |
---|
Customers Also Viewed
USR-ES1 W5500 Chip SPI to LAN Ethernet Converter TCP/IP Module WIZ820io
$15.30Converter BoardAdd to cart>>>Manual:Click here to openOverviewUSR-ES1 embeds Wiznet’s W5500 chip, which uses hardware logic gates to implement the transport layer and network layer of the TCP/IP protocol stack (such as TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE, etc.), and integrates The data link layer, physical layer, and 32K bytes of on-chip RAM serve as data transceiving buffers. …
USR-ES1 W5500 Chip SPI to LAN Ethernet Converter TCP/IP Module WIZ820ioRead More
3pcs TEC1-12715 12V Heat Sink thermoelectric Cooler Peltier Plate Module
$32.04Electronic Accessories & SuppliesAdd to cart40 x 40mm TEC1-12715 12V Heatsink Thermoelectric Cooler Peltier Plate ModuleDescriptionSolid state, vibration free, noise-freeSimple to install and operateThe hot surface need to be good heat sinkSpecificationProduct name:thermoelectric cooler plate moduleModel:TEC1-12715Color:whiteCouples:127Voltage:12VUmax:15.4VImax:15AMax power consumption:231WTmax:70°CQcmax T=0(W):137WSize:40 x 40 x 3.3mmWeight:50gPackage included3 x TEC1-12715 cooler plate module
EQKIT KM-1 DC 6-12V PWM Motor Speed Controller Kit DIY Motor Speed Regulator Set Stepless Speed Control
$8.73Module KitsAdd to cartSpecificationsModel:KM-1Operating voltage:DC 6-12VPCB board size:40 x 40mmCircuit descriptionKM-1 uses PWM (pulse width modulation) to control the speed of the motor, adjust the pulse width duty ratio, so that the speed from zero to the maximum speed stepless speed regulation. The wider the crest width of the control waveform, the faster the motor speed; on the …
20pcs 63V 10000UF 105 High Frequency Temp Electrolytic Capacitor 30mm x 50mm Long Life
$108.62Electronic Accessories & SuppliesAdd to cartSpecificationModel:485622Voltage:63VCapacitance:10000UFTemperature:105→Diameter:30mm / 1.1 inchHeight:50 mm / 2 inchFeaturesLong life, high temperatureHigh-frequency capacitorsPackage included20 x Electrolytic Capacitor
Reviews
There are no reviews yet.