Digital Voltmeter Ammeter Car Current Meter Dual Display 100V 10A DC Gauge Amperemeter Red+Yellow LED Tester Voltage Monitor
$9.42
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Technical Parameters
Display color:Red+Yellow
Display mode:Dual 0.28 LED digital tube
Update rate:About 500 ms/time
Physical size:48 x 29 x 26 mm (L*W* H)
Opening size:45 x 26 mm (L*W)
Supply voltage:3.5-30V
Lead wire length:14 cm(Five wires)
Measurement range:DC 0.00-9.99A(current) 0.0-100V(voltage)
Operation temperature:-10 degrees~65 degrees
Measurement accuracy:voltage ± (0.5% + 1digit) current ± (1% + 2digits)
NOTE
If you take long time to measure the current more than 6A, please weld the lead directly on the electrical outlet in case the instability of the circuit caused by the temperature of contact impedance!
Instruction of wiring
Red thin wire (VCC):Power input+ 3.5-30V (NOTE:If the measuring signal is lower than 30V and have abundant power supply, it can be used as power supply for the module [black wire and yellow wire are contacted together to use])
Black thin wire(GND):Power input- Measurement signal – 3.5-30V
Yellow thin wire (VIN):Measurement signal+ (0-100V)
Red thick wire (I+):Current input+ (connect with the load negative)
Black thin wire(I-):Current input- (in series in power supply negative)
Voltage current meter with isolated power supply
Instruction
Error phenomenon one:Because of the some eclectic parts ageing and influenced by the temperature, sometimes when measuring the small current, the error of some meter become big or sometimes some meter dont show zero without load.
Solution:When the meter is off the power, please short circuit A and B (connect A and B). Then make the meter have the electricity, the meter will automatically calibrated to zero. When the automatic calibration is over, please disconnect A and B. After this, that is ok.
Package included
1 x Digital Voltmeter
2 x cable
Weight | 0.021 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.