5Set 433MHz DC 12V24V 2-Way Remote Control Switch 2 Channel Relay Module Motor forward and Reverse Controller
$113.36
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Technical Parameter
1. Working voltage:DC12-24V
2. Working frequency:433.92MHZ
3. Quiescent current:8.5mA
4. Load power:500W
5. Receiving sensitivity:-105dBM
6. Working mode:Jog, self-locking, interlocking, delay, independent, 1 way, 1 way, self-locking
7. Output signal:can output 2 switching signals or 2 AC220V voltage signals
8. Coding method:learning code
9. Modulation method:ASK
10. Working temperature:-10C~+70C
Instructions
Jog mode:Press the remote control relay to pull in, release the remote control relay to disconnect.
Jog learning method:press the learning button once, the LED indicator flashes quickly 3 times and then goes out, enter the learning state, press any button on the remote control, the LED indicator flashes quickly 3 times and then goes out, then press the remote control button 2. The LED indicator flashes 3 times quickly and then stays on, indicating that the code is successfully matched. (PS. Because it is 2 channels, you need to learn 2 buttons)
Self-locking mode:Press the remote control relay to close, and press the remote control again to disconnect the relay.
Self-locking learning method:Press the pairing button twice in a row, the LED indicator flashes quickly 3 times and then goes out, enter the learning state, press any button on the remote control, the LED indicator flashes quickly 3 times and then goes out, then press the remote control Button 2, the LED indicator flashes quickly 3 times and then stays on, indicating successful code matching
Interlock mode:Press the remote control A button, the relay is closed, and press the remote control B button to disconnect.
Interlock learning method:Press the pairing button 3 times in a row, the LED indicator flashes quickly 3 times and then goes out, enter the learning state, press any button on the remote control, the LED indicator flashes quickly 3 times and then goes out, then press the remote control Button 2, the LED indicator flashes quickly 3 times and then stays on, indicating successful code matching
1-way jog, 1-way self-locking:Press the pairing button 4 times in a row, the LED indicator flashes 3 times and then goes out, enter the learning state, press any button on the remote control, the LED indicator flashes 3 times and then goes out. Then press the remote control button 2, the LED indicator flashes quickly 3 times and then stays on, indicating that the code is successfully matched
Code clearing function:Press the code button 8 times in a row, the LED indicator flashes quickly 4 times and then stays on, the code clearing is completed, and all the remote control key codes learned before are cleared.
Precautions
1. Do not operate with power, turn off the power to operate, and power on after the test is confirmed to be correct.
2. When the remote control voltage is low, please replace the battery in time (when the remote control battery voltage is low, the remote control distance will generally become shorter).
3. When using wireless electronic products, pay attention to avoiding metal masks, large electronic devices, electromagnetic fields, etc., which have strong interference sources, and avoid the short distance between the remote control and the reception or the failure of normal operation.
4. Do not use this electronic product abnormally. Abnormal use will reduce the performance and life of the product. In severe cases, it will damage the product and bring hidden dangers to your safety.
Package includes
5 x Receiver
10 x transmitter
Weight | 0.6 kg |
---|
Customers Also Viewed
3pcs 1838T infrared Sensor Receiver Module Board Remote Controller IR Sensor with Cable
$11.26Sensor & Detector ModuleAdd to cartFeatures– Can receive standard 38KHz remote control signals by means of programming can decode the remote control signals– Strong ability to resist electromagnetic interference and light– Widely used in stereo, TV, set-top boxes, digital photo frame, car stereo, remote control toys, satellite receivers, hard disk players, air conditioner, heater, electric fan, lighting and other home …
3pcs 1838T infrared Sensor Receiver Module Board Remote Controller IR Sensor with CableRead More
600V 45A 3 Position Terminal Block Barrier Strip Dual Row Screw Block Covered W/ Removable Clear Plastic insulating Cover
$16.19Terminal BlocksAdd to cartSpecificationModel:TB4503Type:Terminal block Working frequency:High frequencyInterface type:AC/DCRated current:45ARated voltage:600VConductor cross section:0.5-4mm2Number of pin:6Number of bits:3Contact material:IronSize:70mm x 38mm x 24mmFeature:–Moistureproof–High quality guides,durable–High quality thickened conductive parts–High quality iron screw with high strength–Dust proof transparent plastic protective coverPackage Included1 x Terminal block
5Pcs 2 Lamp Backlight Universal LCD CCFL 10V-28V inverter
$26.31Smart ModuleAdd to cart5Pcs 2 Lamp Backlight Universal LCD CCFL 10V-28V Inverter For 10 Inch To 22 Inch ScreenFeatureVoltage:10V ~ 28VCable:300mm(L) / 6 pinSize:122 x 27mm ( L x W )Interface:double light small interfaceInterface definition:1. VCC 2. GND 3. NULL 4. NULL 5. ON/OFFPackage included5 x 2 lamp backlight universal laptop LCD CCFL inverter 10V-28V5 x Cable
18A 3900W EMI High Frequency Power Filter Finished Board for amp Amplifier Board
$20.90Amplifier BoardAdd to cartFeatures1. Power filter function is through the power line access power filter,get a specific frequency of the power signal, or eliminate a specific frequency power signal. By using this feature of the power filter, a square wave complex or complex noise passing through the power filter can be converted into a sine wave of a …
18A 3900W EMI High Frequency Power Filter Finished Board for amp Amplifier BoardRead More
5pcs EQKIT TDL-555 Touch Delay LED Light DIY Kit Touch Delay Lamp Electronic Parts Production Kit DC 5V 3s to 130s Adjustable
$10.12DIY Electronic KitsAdd to cartFunction1. Connect Power,Red LED ON2. Touch and then start to delay and Red LED OFF and 5pcs White LED ON at the same time3. Red LED ON and White LED OFF after delay4. Delay can be adjust by potentiometer for 3-130 secondPackage included5 x EQKIT® TDL-555 Touch Delay LED Light DIY Kit
Waveshare Universal e-Paper Panel Driver HAT SPI Surface for Raspberry Pi 4
$22.95Raspberry Pi & Orange PiAdd to cartOverviewThis is a universal driver board for e-Paper panels, can be used to drive various SPI interface e-Paper from Waveshare.FeaturesStandard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson NanoSPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUsComes with development resources and manual (examples …
Waveshare Universal e-Paper Panel Driver HAT SPI Surface for Raspberry Pi 4Read More
Reviews
There are no reviews yet.