Digital LCD Anemometer Air Wind Speed Gauge Temperature Test Meter thermometer
$42.96
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Material:Plastic
Color:White
Display:LCD
Wind Speed:0 to 30 m/s
Temperature:-10 to +45℃ / 14 to 113℉
Temperature Accuracy:±2℃ / 35.6℉
℃ / ℉ Selection:Yes
LCD Backlight:Yes
Wind Chill Indication:Yes
Power Off:Auto / Manual
Resolution:0.1m/s, 0.2℃ / 32.36℉
Storage Temperature:-40 to +60°C / -40 to 140℉
Current Consumption:About 3mA
Operating Humidity:Less than or equal to 90% RH
Measurement:Wind Speed & Temperature
Power Source:6F22 9V Battery (NOT included)
Size:160 x 52.5 x 35.5 mm / 6.30 x 2.07 x 1.40 inch (appr.)
Wind Speed
Accuracy:±5%
Wind Speed Unit:m/s, Km/h, ft/min, Knots, mph
Speed:0 – 30m/s, 0 – 90km/h, 0 – 5860ft/min, 0 – 65mph, 0 – 55Knots
Resolution:0.1m/s, 0.3km/h, 19ft/min, 0.2mph, 0.2Knots
Threshold:0.1m/s, 0.3km/h, 39ft/min, 0.2mph, 0.1Knots
Features
Quickly takes accurate measurements.
Easy-to-read LCD display with backlight.
Current/max/average wind speed reading.
Compact and lightweight, convenient to carry.
Ideal for outdoor activities such as Sailing, Surfing, Hand-gliding, Shooting and Walking.
You can also use it for industrial and home purposes such as measuring wind speed and temperature of CPU computer fans, air-conditioners, etc.
Operations
Press MODE more than 2s to turn on the unit.
When the unit is turned on, press MODE more than 3s to activate MODE selection.
Press SET to choose wind speed unit and current/max/average reading.
Press MODE again to confirm the setup.
Press MODE + SET to turn off the unit.
Use a pin to change temperature unit ℃/℉ inside the back cabinet.
Package Included
1x Digital Anemometer
1x User Manual
Notice
– Please allow slight dimension difference due to manual measurement.
– Please consider the actual sizes in the listing as the pictures are generally enlarged to show detail.
– There might be a little color difference due to the monitor, camera or other factors, please refer to the physical item.
– Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.
Weight | 0.178 kg |
---|
Customers Also Viewed
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water Heater
$21.87Laboratory Heating EquipmentsAdd to cartDC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterSpecificationsModel:SSG-2Type:Normally ClosedMaterials:Plastic & CopperDimension:83*90*49cmPipe Inside Diameter:1/2 inchNet Weight:(approx.) 190gFeaturesThis is a DC12V solenoid valve usually used for solar water heater.It can work with water from 1 to 100℃ (or some other liquid).Working Voltage Range:Rated Voltage ±10%Working Water Pressure:0.02 to 0.8MpaThe working water pressure would be too low/high to …
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterRead More
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set Kit
$76.17Terminal BlocksAdd to cartDescription650 Pcs Assorted Ring Insulated Electrical Wire Terminals Crimp Connector Set KitSpecificationQuantity:650PcsMaterial:Copper + PVC+ TinplateInsulated crimp terminals.All are enclosed in plastic case for easy access.The assorted crimp terminals is including50 x Ring M3 Red50 x Ring M4 Red50 x Ring M5 Red50 x Ring M6 Red50 x Ring M8 Red50 x Ring M4 Blue50 x …
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set KitRead More
3.5 inch Protective Enclosure Case Support Dispaly Screen or Cooling Fan for Raspberry Pi
$9.26Raspberry Pi & Orange PiAdd to cartFeatures– Fully updated for Raspberry Pi 3B+/3B/2B– Can support 3.5 inch screen or cooling fan (notes:can not assemble them at the same time)– Heat sink openings for both CPU and LAN chip– High-gloss finish, surface mountableSpecificationsColor:BlackMaterial:ABSSuitable for Raspberry Pi 3B+/3B/2BWeight:45gSize:9cm*6.2cm*3.4cmPackage Included1x ABS Case4x Non-slip mat4x Screws
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module for
$47.25DIY Electronic KitsAdd to cartDescription1. Use TM1650 (compatible with AIP650) digital tube driver chip, support 8-level brightness adjustment, working voltage 3.3V ~ 5.5V2. IIC interface, only need 2 ordinary IO can drive, do not need to repeat scanning of MCU, saving MCU resources.3. 4 digit 0.56 inch red common negative digital tube with decimal point.4. 0.56 inch with four …
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module forRead More
WEAH-81 Car Heavy Bass Frequency Divider High and Low 2-way 2 Bass Crossover Upgrade Tool
$33.09Amplifier BoardAdd to cartFeatureBrand:WEAHModel:81Power:100WApplicable impedance:4-8ohmFrequency response:100Hz ~ 45HzDimensions:133 x 95 x 44mmApplication environment:Car or home speaker DIYPackage includes1 x Bass Frequency DividerHow to Wire:
5pcs 8-36W intelligent Sensor LED Ceiling Light And Sound Control Power Supply Module Bulb Panel Light Built-in Power Driver
$21.42Power Supply ModuleAdd to cartDescriptionInput Voltage:AC185-265VOutput Current:0.22AOutput Voltage:24-108VEfficiency:90%Working Frequency:50/60HZOutput Power:8-24WSound Control:50-75dBLight control:7-20LuxDiameter:25.8mmFeature1. The combination of sound and light control, when the light is strong, does not work, the light intensity is lower than 12-15LUX, and the sound of the induction 27-36DB starts automatically.2. Delay 40-60S automatically extinguished, easy to install, compatible with ordinary switches, no additional wiring.3. Single trigger, …
Reviews
There are no reviews yet.