12V/24V/36V LCD Display Lead Acid Battery Capacity Meter Voltmeter Power Monitor
$38.46
Voltage 36V / Voltage 24V / Voltage 12V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Material:Plastic Shell
Color:Grey+Blue
Size:As picture shown
Features
The open programming mode
The buzzer alarm(Selective assembly).
The low power red mark flashes to remind.
The product can go to sleep after 10 seconds.
The 10~100V wide input voltage,reverse protection.
The installation is simple, with a buckle, without screws.
Detection of the battery temperature (Selective assembly).
The color liquid crystal material, light clear display, display the soft night.
To display the percentage of remaining battery power,voltage, temperature value.
Suitable for lead-acid, lithium-ion batteries, lithium iron phosphate, metal hydride battery.
INSTRUCTIONS
1. PH2.0 terminal products supporting the use of wire, connected to the circuit board face should plug back.
2. External NTC temperature sensor, please put the sensor to measure the temperature of the parts, do not
squeeze the sensor( selective assembly).
3. Red line to the positive terminal, black line to the negative terminal.
4. After the instrument is powered on , which shows the percentage of the battery power, the voltage value,
and the symbols of the analog battery.
5. Press the button to turn off the instrument. In close mode, you can wake up the instrument by pressing
any button.
6. Click the button , you can switch the voltage value and temperature value display.
7. The battery symbols on the display interface, from the right to the left, are 7 display boxes representing the
pool power from low to high.
8. The voltage on the display interface is measured in real time, and the voltage value is displayed on
10-100V.
9. The percentage on the display interface is the percentage of the remaining battery power
10. When the battery is connected to the charger or the discharge of the high current load, the display
parameters will fluctuate
11. The red lightning flashes the alarm when the battery is low
12. Low voltage buzzer alarm(Selective assembly)
13. If the battery specification is special, you can enter the set mode 3– and reset the upper and lower limits of
the measured battery voltage.
Package included
1x Battery Monitor
1x Cable
Notice
Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
Please understand that colors may exist chromatic aberration as the different placement of pictures.
Weight | 0.027 kg |
---|
Customers Also Viewed
3pcs Geekcreit 3 in 1 AC 60-500V 100A Voltmeter Ammeter HZ Hertz Frequency Meter 22mm Digital Current Voltage Amp Signal Light Green LED Lamp indicator with CT
$30.29Electronic Accessories & SuppliesAdd to cartSpecificationsMaterial:ABS Electrical componentsColor:GreenVoltage Measuring Range:AC 60~500VCurrent Measuring Range:0~100AFrequency Measuring Range:20~75HzPanel Size:31*31mm / 1.22*1.22inInstallation Diameter:20.3mm / 0.8inPackage included3 x AC Voltmeter Ammeter Frequency Meter 3 in 1 Indicator3 x Current Coil Transformer
Waveshare 1.5 inch OLED Module SSD1327 Driver I2C Communication Compatible with Jetson Nano 128×128 General 1.5inch Display Board
$32.48Display ScreenAdd to cartDocumentsManual:Click here to openSchematic:Click here to openDatasheet:Click here to openCode:Click here to openOverviewThis is a general OLED display Module, 1.5inch diagonal, 128×128 pixels, 16 gray scale, with embedded controller, communicating via SPI or I2C interface.Features128×128 high resolution16 gray scale, better display effectSupports SPI or I2C interface, configured via onboard resistorComes with development resources and manual …
10Pcs TDA2030A 6-12V AC/DC Single Power Supply Audio Amplifier Board Module
$19.32Power Supply ModuleAdd to cartSpecifications1. Onboard TDA2030A audio power amplifier chip.2. Mono 18W power amplifier circuit design.3. Socket onboard horn .4. The onboard 10 k adjustable resistance, can adjust the volume of the amplification.5. The onboard power light.6. Chip has lead to the main pin, can directly input audio signal.7. Working voltage:6 – 12V.8. Board size:33 x 25 x …
10Pcs TDA2030A 6-12V AC/DC Single Power Supply Audio Amplifier Board ModuleRead More
L60 60A 12V/24V Auto LCD MPPT Solar Battery Charge Controller High Efficiency Solar Tracking System
$247.04Solar ControllersAdd to cartDescriptionThis is a three-time controller into the evening(evening)working time,an interval of rest or pause time,Dawn working time(morning light function),the user can according to their needs,set a different time.A:time(evening working)B:time(Pause working)C:time(dawn working)This is a compatible MPPT charge controller PWM intelligent/efficient/energy saving,he not only has efficient MPPT controller charging function to automatically track the maximum power point,10%-30% …
5pcs W5500 Ethernet Module TCP/IP Protocol Stack SPI interface IOT Shield Geekcreit for Arduino – products that work with official Arduino boards
$54.95Smart ModuleAdd to cartIntroductionThe W5500 is a full-featured TCP/IP embedded Ethernet controller that provides an easier Internet connection solution for embedded systems. The hardware logic gates are used to implement the transport layer and network layer of the TCP/IP protocol stack (eg TCP). , UDP, ICMP, IPv4, ARP, IGMP, PPPoE and other protocols), and integrated data link layer, …
5 Blade Heat Self-Power Stove Fan Wall Mounted Magnetic Fireplace Eco Fan
$131.61Temperature ControllersAdd to cartFeatures1. Longer service life – the entire fan is made of aluminum alloy and will not rust or corrode when heated.Quiet – the only moving part is the blade assembly. You don’t even know the fan there, but you will feel warm!2. No battery or power is required – the stove fan uses the heat …
5 Blade Heat Self-Power Stove Fan Wall Mounted Magnetic Fireplace Eco FanRead More
Reviews
There are no reviews yet.