12V/24V/36V LCD Display Lead Acid Battery Capacity Meter Voltmeter Power Monitor
$38.46
Voltage 36V / Voltage 24V / Voltage 12V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Material:Plastic Shell
Color:Grey+Blue
Size:As picture shown
Features
The open programming mode
The buzzer alarm(Selective assembly).
The low power red mark flashes to remind.
The product can go to sleep after 10 seconds.
The 10~100V wide input voltage,reverse protection.
The installation is simple, with a buckle, without screws.
Detection of the battery temperature (Selective assembly).
The color liquid crystal material, light clear display, display the soft night.
To display the percentage of remaining battery power,voltage, temperature value.
Suitable for lead-acid, lithium-ion batteries, lithium iron phosphate, metal hydride battery.
INSTRUCTIONS
1. PH2.0 terminal products supporting the use of wire, connected to the circuit board face should plug back.
2. External NTC temperature sensor, please put the sensor to measure the temperature of the parts, do not
squeeze the sensor( selective assembly).
3. Red line to the positive terminal, black line to the negative terminal.
4. After the instrument is powered on , which shows the percentage of the battery power, the voltage value,
and the symbols of the analog battery.
5. Press the button to turn off the instrument. In close mode, you can wake up the instrument by pressing
any button.
6. Click the button , you can switch the voltage value and temperature value display.
7. The battery symbols on the display interface, from the right to the left, are 7 display boxes representing the
pool power from low to high.
8. The voltage on the display interface is measured in real time, and the voltage value is displayed on
10-100V.
9. The percentage on the display interface is the percentage of the remaining battery power
10. When the battery is connected to the charger or the discharge of the high current load, the display
parameters will fluctuate
11. The red lightning flashes the alarm when the battery is low
12. Low voltage buzzer alarm(Selective assembly)
13. If the battery specification is special, you can enter the set mode 3– and reset the upper and lower limits of
the measured battery voltage.
Package included
1x Battery Monitor
1x Cable
Notice
Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
Please understand that colors may exist chromatic aberration as the different placement of pictures.
Weight | 0.027 kg |
---|
Customers Also Viewed
10pcs TK10-1P 1 Channel Relay Module High Level 10A MCU Expansion Relay 12V
$20.90Relay ModuleAdd to cartSpecificationsVoltage:12VQuiescent current Dynamic current:25mA@24V, 45mA@12V, 85mA@5VSignal:>2V, 0.5mAResponse time:50mSFeatures– the control area and the load area and the contact are in accordance with the creepage distance requirement;– With relay action indication, the suction is bright, and the disconnection is not bright;– Can be used as a microcontroller development board module, can be used as home appliance …
10pcs TK10-1P 1 Channel Relay Module High Level 10A MCU Expansion Relay 12VRead More
DC-DC 0.9V-5V USB Output Charger Step Up Power Module
$4.04Power Supply ModuleAdd to cartDC-DC 0.9V-5V USB Output Charger Step Up Power ModuleDescriptionInput voltage:0.9V – 5VOutput voltage:5.1 – 5 .2 VOutput Current:500mA (single lithium input)Efficiency:Up to 96% (the higher the input voltage, the higher the efficiency)Switching frequency:500KHzOutput ripple:30mV (MAX) 20M bandwidth (input 4V output 5.1V 1A)Voltage indication:LED lights with load (input voltage less than 2.7V LED indicator off)Operating Temperature:Industrial …
DC-DC 0.9V-5V USB Output Charger Step Up Power ModuleRead More
AC-DC Switching Power Supply Module AC 100-240V to DC 24V 9A Power Supply Board
$30.60Power Supply ModuleAdd to cartFeatureInput voltage:AC 100-240V 50/60HZOutput voltage:DC 24VOutput current:Rated 6A, peak 9AOutput power:150W(Max 220W)Location pore zize:105.8 x 55.7mmOverall dimensions:115 x 65mmRipple noiseOvercurrent protection:YesOverload protection:YesShort circuit protection:YesPackage includes1 x AC-DC Switching Power Supply Module
21 Holes Acrylic Transparent Lollipop Stand Party Candy Cupcake Display Rack
$20.24Bottles & JarsAdd to cartSpecificationsMaterial:AcrylicColor:TransparentType:21 PolesThickness of board:2mmSize:(L)x(W)x(H) 28 x 12 x 5 cm / 11.02′ x 4.72′ x 1.97′(appr.)Features Made of acrylic material. Each plate comes with a protective film to minimize scratching during shipping. 21 poles acrylic lollipop rack, can used at party or store. Easy to disassemble for clean and storage. Easy to assemble. Whether for …
21 Holes Acrylic Transparent Lollipop Stand Party Candy Cupcake Display RackRead More
GY-SHT30-D SHT30 3.3V Digital Temperature and Humidity Sensor Module IIC I2C interface
$10.92Sensor & Detector ModuleAdd to cart*Note:Joint product & Provided by Hobbyant and Newchic.More document click to downdoad:SHT30FeaturesThe digital temperature and humidity sensor module uses the SHT30 chip, and the measurement data is factory corrected, linearized, and temperature compensated. With temperature and humidity alarm output and software and hardware reset function. Avoid use in volatile organic environments in order not to …
GY-SHT30-D SHT30 3.3V Digital Temperature and Humidity Sensor Module IIC I2C interfaceRead More
FB04-500 500mW 405nm Blue Violet Laser Module 2*2.54-2P TTL/PWM Modulation for EleksMaker Engraver
$84.23Laser ModuleAdd to cartWhat’s the diference between FB03 Series and FB04 Series Laser Module When or why do i need to have a FB04 Series Laser Module– It depends on what the interface for laser module on your controller board is like. – The controller board of EleksMaker Series Engraver is designed with a 3-Pin (12V/GND/PWM) interface for …
1Set 15cm 20cm 25cm Multifunctional PCB Ruler Measuring Tool Resistor Capacitor Chip IC SMD Diode Transistor Package 180 Degrees
$13.76Electronic Accessories & SuppliesAdd to cart15CM PCB Ruler FeaturesMaterial:PCBFont size guide, trace-width diagram, and a set of AWG-sized drillsCentimeter side:0.1cm marks20CM PCB RULER DescriptionThis versatile PCB ruler, It also integrates relevant information for PCB design such as angle gauges, devices, IC pin spacing tables, and more. Electronic enthusiasts in the design process in urgent need of a measurement tool can …
Reviews
There are no reviews yet.