100w 3-speed Silent Hot Water Circulation Pump for Household Solar Heater System
$139.71
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Material:Cast Iron
Color:Green+Black
Power:100W, 50Hz
Voltage:220v~240v
Head:6M
Capacity:50L/min
Circulation area:Less than 50㎡
Connector:25mm(Outer diameter)
Plug Type:China National Standard Plug (We will be based on your country to send the corresponding adapter plug)
Features
Low noise ,no leakage
Robust cast iron construction
3-Stall speed adjustment according your own need
The red button facilitates pre-selection of the pump ooutput
Up to 20% less electrical current consumption in comparison to convenientional standard pumps
Widely used in city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on.
The main purpose
The pump is suitable for hot and cold water circulation below 100 °C and supercharging, especially the shower is difficult to ignite due to low water pressure or the water pressure is unstable and easy to fire. Installation and use of this pump can completely solve the problem:the household water pressure is too low and supercharged Water supply; solar water heater water supply, boiler hot water circulation pressurization, industrial equipment liquid pressurization cycle, air conditioning and refrigeration system circulating pressurization
Precautions for use
1. After the pump is installed, connect the power supply and try to turn it for a few minutes (check whether the startup is normal), but the idle time should not be too long to prevent the dry running from affecting the life of the ceramic bearing.
2. When using this product in the home, you should pay attention to the exhaust of the pump, or when it is overhauled, the dripping water will prevent moisture on the board and the moisture-prone items.
3. When the product is supplied with water in the heating system, do not touch it with your hands to prevent burns.
4. Before installing the water pump, it should be ensured that the pipeline has no slag. If there are impurities, welding slag, dirt, etc., it will damage the life of the pump.
5. The pump should be installed in a place that is easy to repair or replace later.
6. Pay attention to the direction of water flow when the pump is installed. The direction of the water flow should be consistent with the water flow mark of the pump.
7. If the direction of the junction box hits the wall or the shift switch is not easy to operate during installation,you can loosen the four hex screws on the pump head. Rotate the motor body until the position is required, please be careful not to damage the rubber washer, then re-tighten the screw evenly and check if the seal line leaks.
Package included
1 X Circulating Pump
Weight | 1.857 kg |
---|
Customers Also Viewed
LM338K 3A Voltage Digital Display High Power Adjustable Linear Module Buck Step Down Regulator
$29.73Power Supply ModuleAdd to cartParameterBoard size:9.6cm x 5.8cmDC input:3-35 voltsAC input:1-25 voltsOutput DC:1.2-30 volts; kit weight:155 gramsMaximum current:3 amps, (LM338K theory can go to 5A, we use domestic LM338K, up to 3A, import disassemble up to 5A)Input and output minimum differential:3 voltsMaximum power consumption:50WAbout LM338K maximum power calculationFor example, input 25V, output 18v load current 2A, then the power …
5Pcs Yushun LS-5S 24V 5W AC to DC Switching Power Supply Module Monitoring Power Supply with White Shell
$32.16Power Supply ModuleAdd to cartFeatures1. Wide input voltage range2. With overload, short circuit and over temperature protection functions3. Small size, high efficiency4. Full load aging test5. Ultra-low output rippleSpecificationBrand:EshionModel:LS-5SVoltage:24V200mA LS-5S24Modulation method:pulse width modulation (PWM) typeTransistor connection mode:single-endedInput voltage:86-264VInput voltage range:100~264V ACOutput /Rated power:5WOutput voltage:24VWork efficiency:75%~76%Output ripple noiseVoltage adjustment rate:÷1%Load regulation rate:÷1%Product Certification:CEOutput current:0.2AFrequency range:47~63HZWorking temperature:-20→~+50→Dimensions:58mm*30mm*22mmWeight:25g(1pcs)Package included5 x Power Supply …
SIM7020C NB-IoT Expansion Board Full Netcom Module Support for Arduino LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS
$52.47Expansion Board & ShieldAdd to cartFeatureOnboard Raspberry Pi interface, can be directly inserted into any version of Raspberry PiSupport LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS and other protocol communicationsSupport domestic OneNET/telecom cloud/aira cloud platformOnboard USB interface, can be used for power supply or software debuggingLead out UART control interface, can be used to connect Arduino/STM32 and other main control boardsOnboard level conversion circuit, the default …
10pcs 3.3V 5V 8 Bit Blue Common Anode LED indicator Display Module DIY Kit
$21.59Display ScreenAdd to cartDescriptionIt can be inserted directly into Breadboard,Ideal for linking up to your Arduiuo UNO Mini Nano Mega2560 DUE Breadboard etc,or others MCU ( AVR STM32 ARM7 ARM9 ARM10 ARM11 PIC C8051 STC MSP430 FPGA/CPLD etc.) SpecificationsColor:BlueWorking Voltage:DC 3-24VPolarity:Common anodeInterface:2.54MM with PIN/2.54MM no PINSize:22.86 x 14.13 x 2.11 mmWeight:1.3gApplicationMCU/ARM/FPGA/Atmega328pPLC MotorElectronic diy kitESP8266/nodemcuNANO/UNO/MEGA2560/BreadboardRaspberry pi 4/robotPackage Incldued10 x …
10pcs 3.3V 5V 8 Bit Blue Common Anode LED indicator Display Module DIY KitRead More
infrared Light Board 42*IR LED Board for CCTV Camera Night Vision 850nm DC12V
$6.55LED BoardAdd to cartDescription– Infrared IR LED boards for CCTV cameras night vision.– Power supply exceeds DC13V may greatly reduce the LEDs operating life.SpecificationsBoard Diameter:60 mminner Diameter:32mmPower Supply:DC12V / 220mA Operation Temperature:-10→ to +50→LED Lamps / Bulbs Size:5mmIR Lights WaveLength:850nmPackage Included1 x 42*IR LED Board for CCTV Camera
10pcs XY-SP5W 5128 Mini Class D Digital Amplifier Board 5W Mono Audio Power Amplifier
$15.27Amplifier BoardAdd to cartFeatures∵ Operating current:>1A∵ Power Output:3~5W∵ Drive Speaker:4~8∵ SNR:85dB@ VDD=5V,Vorms=1V∵ Class D Audio Amplifier∵ Low Distortion, Low Noise FloorNotes1.2.5V to 5.5V operation from a single supply ,and damaged upper 5.5V.2.A 5V/1A DC adapter is recommended to supply the module.3.The circuit will be damaged if the power polarity is oppsite.4.4 3W Speaker is recommended5.With mute fuction, Mute …
10pcs XY-SP5W 5128 Mini Class D Digital Amplifier Board 5W Mono Audio Power AmplifierRead More
10Pcs 2 Key Press Film Switch Module Single Chip Microcomputer Extended Keyboard Electronic Switch Module
$16.11Other Module BoardAdd to cartSpecificationsProduct thickness:1.00mm (+0.02mm)Panel material:PCBack adhesive tape:white glueButton strength:280gTemperature:-15 ° C / +65 ° CCircuit material:0.125mm PET transparentButton package type:button planeButton package height:0.3mmKey life:>100,000 timesLoop resistanceConnector:2.54mm square hole with protective coverSize:40*20mmPackage Included10 x 2 Key Press Film Switch
Reviews
There are no reviews yet.