100w 3-speed Silent Hot Water Circulation Pump for Household Solar Heater System
$139.71
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Material:Cast Iron
Color:Green+Black
Power:100W, 50Hz
Voltage:220v~240v
Head:6M
Capacity:50L/min
Circulation area:Less than 50㎡
Connector:25mm(Outer diameter)
Plug Type:China National Standard Plug (We will be based on your country to send the corresponding adapter plug)
Features
Low noise ,no leakage
Robust cast iron construction
3-Stall speed adjustment according your own need
The red button facilitates pre-selection of the pump ooutput
Up to 20% less electrical current consumption in comparison to convenientional standard pumps
Widely used in city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on.
The main purpose
The pump is suitable for hot and cold water circulation below 100 °C and supercharging, especially the shower is difficult to ignite due to low water pressure or the water pressure is unstable and easy to fire. Installation and use of this pump can completely solve the problem:the household water pressure is too low and supercharged Water supply; solar water heater water supply, boiler hot water circulation pressurization, industrial equipment liquid pressurization cycle, air conditioning and refrigeration system circulating pressurization
Precautions for use
1. After the pump is installed, connect the power supply and try to turn it for a few minutes (check whether the startup is normal), but the idle time should not be too long to prevent the dry running from affecting the life of the ceramic bearing.
2. When using this product in the home, you should pay attention to the exhaust of the pump, or when it is overhauled, the dripping water will prevent moisture on the board and the moisture-prone items.
3. When the product is supplied with water in the heating system, do not touch it with your hands to prevent burns.
4. Before installing the water pump, it should be ensured that the pipeline has no slag. If there are impurities, welding slag, dirt, etc., it will damage the life of the pump.
5. The pump should be installed in a place that is easy to repair or replace later.
6. Pay attention to the direction of water flow when the pump is installed. The direction of the water flow should be consistent with the water flow mark of the pump.
7. If the direction of the junction box hits the wall or the shift switch is not easy to operate during installation,you can loosen the four hex screws on the pump head. Rotate the motor body until the position is required, please be careful not to damage the rubber washer, then re-tighten the screw evenly and check if the seal line leaks.
Package included
1 X Circulating Pump
Weight | 1.857 kg |
---|
Customers Also Viewed
10pcs 4 Digit LED Display Tube 7 Segments TM1637 50x19mm Blue Clock Display Colon RobotDyn for Arduino – products that work with official for Arduino Boards
$87.47Display ScreenAdd to cartFeatureThis is a basic 4-digit 7-segment display module.The display features double points in midle. The decimal point per digit not active.Module connecting to digital I/O on 2 pins.For Arduino use library:TM1637.hPackage includes10 x LED Display TubeSketch include ‘TM1637.h’ // include the TM1637 libraryTM1637 display(2, 3);// // initialize the library for pins 2, 3void setup()void loop()
10pcs WL102 433MHz Wireless Remote Control Transmitter Module ASK/OOK for Smart Home
$38.58Smart ModuleAdd to cartFeaturesThe WL102 transmitter module is a UHF ASK modulation transmitter that supports ASK and OOK modulation. The transmitting module integrates a PLL circuit and an ASK analog modulation circuit, and has a high degree of integration and the like, and can be applied to short-range wireless communication. The transmission frequency is greater than 11dBm.– Support …
10pcs WL102 433MHz Wireless Remote Control Transmitter Module ASK/OOK for Smart HomeRead More
5PCS FR4 180x120mm Single Side Copper Clad Laminate PCB Circuit Board CCL
$16.39Electronic Accessories & SuppliesAdd to cartSpecificationPanel Size:Approx.180mm x 120mm or 7.09′ x 4.73′ (inch)Thickness:0.06′ ÷0.005 (1.5mm ÷ 0.15)Weight:Approx.58gLayers:Single SidePanel:FR4Operating temperature:Up to 140 C or 285FDescriptionThis Single PCB Copper Clad Laminate Board is made of copper foil by the hot-pressing technology.steel-wool, Restore4, Tarn-X, roscherite, Zap or similar before using.After that be sure to rinse and dry so without any water spots.Combined …
5PCS FR4 180x120mm Single Side Copper Clad Laminate PCB Circuit Board CCLRead More
CNC Driver Control Module 5-axis MACH3 interface Board USB Engraving Machine 5 Axis with MPG Stepper Motor Motion Controller
$56.85Other Module BoardAdd to cartFeature1. Support various versions of MACH3 and support the highest version.2. Support windows XP, WIN7, WIN8, WIN10, support 64-bit system, support laptop, support tablet.3. The peripheral wide voltage input is 12-24V, and it has anti-reverse function.4. All input signals are isolated by optocoupler, which can be connected to emergency stop, tool setting, limit position and …
TB293 7W USB DC to DC 5V to 6V 9V 12V 15V Adjustable Output Converter Step Up Boost Module for LED Motor Fan
$8.73Boost & Buck ModuleAdd to cartDescriptionInput voltage:3~6VOutput voltage:6-15.5VMaximum input current:1.4ALong-term work Current:1AConversion efficiency:79-90% Input Interface:USB MaleOuput Interface:2 PIN XH2.54 Power:Maximum 7WWorking frequency:1.0MHzOperating temperature:-40 to +85 →Size:47.5 x 16mmApplications6-15V Low Power Motor6-15V LED LightingHard drive power supply9V 12V 15V Routers and network equipmentWireless communication equipment315M 433M Wireless remote controllerAttention1. Input voltage can not be greater than the maximum input range.2. Output …
150pcs 2.54mm 8 Pin IC DIP integrated Circuit Sockets Adaptor
$11.81Electronic Accessories & SuppliesAdd to cartSpecificationColor:blackQuantity:150pcsNumber of pins:8 pinsPin length:2.9mmPitch:2.54mmRow to row distance:7.62mmDimension:10 x 10 x 8mm (L x W x H)Contact termination through holeContact type dual wipe contactPackage included150 x 8 Pin IC sockets
5pcs DC 12V Battery Charging Control Board intelligent Charger Power Control Module Automatic Switch
$41.55Power Supply ModuleAdd to cartSpecificationSupply Voltage:DC 13.8-14.8VRelay Closing Voltage:DC 12.4VRelay Disconnection Voltage:DC 14.8VVoltage Tolerance:±0.1VApplication Fields:DC 12V storage batteryPotentiometer Adjustment:RP1 RP2Size:50 x 32 x 18mmSwitch:Automatic charging on or offPackage Includes5 x Battery Charging Control Module
Reviews
There are no reviews yet.