TDA2030A 2.0 Audio Amplifier Module Board 18W*2 Double Track DIY Kit
$15.30
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
TDA2030A 2.0 Audio Amplifier Module Board 18W*2 Double Track DIY Kit
Features
This circuit consists of two channels, including W101 as the volume potentiometer, W102 bass adjust potentiometer, W103 for high adjust potentiometer.
The input audio signal after the volume and tone control by the C106, C206 sent to TDA2030 integrated audio power amplifier.
Note
This is a DIY kit, you need to have some knowledge of electronics and ability.
This kit does not provide instruction.
Schematic:Click to open
Specification
Working voltage:AC9 ~ 12V
Output power:Left and right channel 18 w x2 (horn)
Output impedance:4-8Ω
PCB size:12 x 5.5 cm(L*W)
Package list
Component:Label:Value:Number
Diode (1N4407):D1, D2, D3, D4:1N4007:4
Resistance:R101,R201:RTI-0.25~1KΩ ±5%:2
Resistance:R102,R202:RTI-0.25~10KΩ ±5%:2
Resistance:R103,R203:RTI-0.25~1.5KΩ ±5%:2
Resistance:R104,R204:RTI-0.25~5.6KΩ ±5%:2
Resistance:R105,R205:RTI-0.25~1KΩ ±5%:2
Resistance:R106,R206:RTI-0.25~1KΩ ±5%:2
Resistance:R107,R207:RTI-0.25~33KΩ ±5%:2
Resistance:R108,R208:RTI-0.25~47KΩ ±5%:2
Resistance:R109,R209:RTI-0.25~300KΩ ±5%:2
Resistance:R110,R210:RTI-0.25~10KΩ ±5%:2
Duplex Potentionmeter:W101, W102, W103:50K:3
Electrolytic Capacitor:C1, C2, C3, C4:2200uf/25V:4
Polyester Capacitor:C5, C6:0.1uf:2
Ceramics Capacitors:C101, C201:4700pf:2
Ceramics Capacitors:C102, C202:22nf:2
Ceramics Capacitors:C103, C203:220nf:2
Ceramics Capacitors:C104, C204:22nf:2
Ceramics Capacitors:C105, C205:10nf:2
Ceramics Capacitors:C106, C206:47nf:2
Ceramics Capacitors:C107, C207:0.1uf:2
Aluminum Heat Sink:/:/:2
TDA2030A:IC1, IC2:TDA2030A:2
M3 Screw:/:3mm:2
PCB:/:/:1
Terminal (HT3.96-2P):/:/:2
Terminal (HT3.96-3P):/:/:1
Headset Seat:/:/:1
Reference diagram:
Weight | 0.089 kg |
---|
Customers Also Viewed
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water Heater
$21.87Laboratory Heating EquipmentsAdd to cartDC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterSpecificationsModel:SSG-2Type:Normally ClosedMaterials:Plastic & CopperDimension:83*90*49cmPipe Inside Diameter:1/2 inchNet Weight:(approx.) 190gFeaturesThis is a DC12V solenoid valve usually used for solar water heater.It can work with water from 1 to 100℃ (or some other liquid).Working Voltage Range:Rated Voltage ±10%Working Water Pressure:0.02 to 0.8MpaThe working water pressure would be too low/high to …
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterRead More
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set Kit
$76.17Terminal BlocksAdd to cartDescription650 Pcs Assorted Ring Insulated Electrical Wire Terminals Crimp Connector Set KitSpecificationQuantity:650PcsMaterial:Copper + PVC+ TinplateInsulated crimp terminals.All are enclosed in plastic case for easy access.The assorted crimp terminals is including50 x Ring M3 Red50 x Ring M4 Red50 x Ring M5 Red50 x Ring M6 Red50 x Ring M8 Red50 x Ring M4 Blue50 x …
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set KitRead More
3.5 inch Protective Enclosure Case Support Dispaly Screen or Cooling Fan for Raspberry Pi
$9.26Raspberry Pi & Orange PiAdd to cartFeatures– Fully updated for Raspberry Pi 3B+/3B/2B– Can support 3.5 inch screen or cooling fan (notes:can not assemble them at the same time)– Heat sink openings for both CPU and LAN chip– High-gloss finish, surface mountableSpecificationsColor:BlackMaterial:ABSSuitable for Raspberry Pi 3B+/3B/2BWeight:45gSize:9cm*6.2cm*3.4cmPackage Included1x ABS Case4x Non-slip mat4x Screws
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module for
$47.25DIY Electronic KitsAdd to cartDescription1. Use TM1650 (compatible with AIP650) digital tube driver chip, support 8-level brightness adjustment, working voltage 3.3V ~ 5.5V2. IIC interface, only need 2 ordinary IO can drive, do not need to repeat scanning of MCU, saving MCU resources.3. 4 digit 0.56 inch red common negative digital tube with decimal point.4. 0.56 inch with four …
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module forRead More
WEAH-81 Car Heavy Bass Frequency Divider High and Low 2-way 2 Bass Crossover Upgrade Tool
$33.09Amplifier BoardAdd to cartFeatureBrand:WEAHModel:81Power:100WApplicable impedance:4-8ohmFrequency response:100Hz ~ 45HzDimensions:133 x 95 x 44mmApplication environment:Car or home speaker DIYPackage includes1 x Bass Frequency DividerHow to Wire:
5pcs 8-36W intelligent Sensor LED Ceiling Light And Sound Control Power Supply Module Bulb Panel Light Built-in Power Driver
$21.42Power Supply ModuleAdd to cartDescriptionInput Voltage:AC185-265VOutput Current:0.22AOutput Voltage:24-108VEfficiency:90%Working Frequency:50/60HZOutput Power:8-24WSound Control:50-75dBLight control:7-20LuxDiameter:25.8mmFeature1. The combination of sound and light control, when the light is strong, does not work, the light intensity is lower than 12-15LUX, and the sound of the induction 27-36DB starts automatically.2. Delay 40-60S automatically extinguished, easy to install, compatible with ordinary switches, no additional wiring.3. Single trigger, …
Reviews
There are no reviews yet.