Geekcreit T.SK106A.03 T.SK105A.03 Universal LCD TV Controller Driver Board PC/VGA/HD/USB interface
$30.60
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
T.RD8503.03 Firmware:Click here to open
T.V53.03 Manual:Click here to open
T.V53.03 Firmware:Click here to open
T.SK106A.03 Manual:Click here to open
T.SK106A.03 Firmware:Click here to open
New Version T.SK105A.03 Manual:Click here to open
New Version T.SK105A.03 Firmware:Click here to open
Note:Since the driver board model is updated frequently, the appearance and chip will be different, please refer to the actual received. If you mind this, please buy carefully.
Description
Model:T.V53.03 (Update from December 25, 2019)
Model:T.SK106A.03 (Update from September 1, 2020)
Update Model:T.SK105A.03 (Update from November, 2020) The specific model is mainly based on the received model, pay attention to burning the corresponding model firmware.
Input Interface:PC / HD / TV / USB multimedia playing
Voltage:Single 12 V
Screen interface:LVDS Single 6 / 8 , Double 6 / 8
Screen voltage:3.3V / 5V / 12V
Only supports the resolution of
1920×1200
1920×1080
1680×1050
1680×945
1600X1200
1600×900
1400X1050
1440×900
1366×768
1280×1024
1280×854
1280×800
1280×768
1280×720
1024×768
1024×600
800×600
Burning method:to record the screen program in the USB flash disk, USB flash disk inserted into board, plug in the keypad, electricity; About after a few seconds, press the keypad lights start alternating red and green flash, flash lights began to write programs (please do not power), light in the slow flash first, after a slow flash flash, will speed up the quick flash, long after the last until the lights stop flashing light is the program written, electricity burn with USB flash disk to complete the program.
Not only USB interface can be used to upgrade programs, but also can use to play video, basically formats are supported. You can also set a boot display pictures or LOGO
Notice
1. The power requirement of 12V4A
2. Screen voltage jump line according to the working voltage of screen jump to the corresponding position
3. Use to adapt to the board of general screen line
4. The screen line not to reverse and dislocation
Programming
1. The screen of the program is copied(.bin file) to the usb drive.
2. Insert USB Flash disk to the USB port on the board
3. Connected to the keypad, electricity again, until you see by the indicator lights on the keypad after flashing in red and green, until after the indicator light flashing, unplug the power, then pull out USB Flash disk, afresh power on.(Note that write programs do not power outages, crashing won’t be able to use)
Package included
1 x Controller Board
1 x Remote control
1 x IR
Weight | 0.13 kg |
---|
Customers Also Viewed
KW-AR-Mini Kit with 17 Classes UNO R3 DC Motor Breadboard LED Components Set Geekcreit for Arduino – products that work with official Arduino boards
$39.35Module KitsAdd to cartFeatureFree TutorialGood kit for Arduino Starter17 ClassesClass 1 Hello Arduino!Class 2 LED Running LightsClass 3 Key ExperimentClass 4 AD Analog-to-Digital conversationClass 5 PWM ExperimentClass 6 Buzzer ExperimentClass 7 The Temperature Sensor ExperimentClass 8 Photosensitive Light ExperimentClass 9 Fire Alarm ExperimentClass 10 Infrared Remote ControlClass 11 UltrasonicClass 12 8-Bit Digital Display ExperimentClass 13 4 x 8 …
2Pcs Mini Football Soccer Goals for Training Junior Kids Children
$136.93Carbon FiberAdd to cartSpecificationsMaterial:Nylon & G-carbonSize:1200*810*810mmColor:Red&GreenWeight:820gFeatures1. This item is great for junior soccer players to practice their shooting accuracy, or just to have fun and play some shooting games.2. Easy to Set Up–The pop up soccer goals are super easy to set up, your kids maybe can do that all on his own, or call some friends to …
2Pcs Mini Football Soccer Goals for Training Junior Kids ChildrenRead More
5pcs 2S 10A 7.4V 18650 Lithium Battery Protection Board 8.4V Balanced Function Overcharged Protection
$19.20Battery Protection ModuleAdd to cartSpecificationsModel:HX-2S-JH20 Overcharge voltage range:4.25±0.05vSize:46.7*23*3.15mm Over-discharge voltage range:2.9v±0.05vUpper limit working current:10A Working temperature:-40—+50°CUpper limit instantaneous current:20A Storage condition:-40– +80°CQuiescent current:less than 10uA Internal resistance:less than 300mΩ Short circuit protection:protection, charge recoveryCharging voltage:8.4V-9VWelding Point Description· B+ is connected to the battery positive pole;· B- is connected to the negative pole of the battery;· MB is connected to …
55Pcs/Set Silicone Casting Molds and Tools Jewelry Pendant Resin Mould DIY
$38.46Painting Teaching ToolsAdd to cartFeatures-This set of making tool is especially designed for DIY expoxy resin crafts, including silicone mold,spoon,sequin,drill,nails and so on.-Different silicone molds have different shapes for you to choose,which may accurately match your various needs.-It is easy control with the reliable quanlity as well as the efficence. -The superior DIY tools for your craft works.SpecificationMaterials:Silicone,MetalType:Making ToolsQuantity:55pcs,one …
55Pcs/Set Silicone Casting Molds and Tools Jewelry Pendant Resin Mould DIYRead More
DIY thermoelectric Peltier Semiconductor Refrigeration Cooling System + Fan Kit
$27.54Electronic Accessories & SuppliesAdd to cartFeaturesSimple operation, strong practicabilityFast cooling, outstanding effectPower supply:12V 15AFan power rate:about 5WFan size:40*40mm Cooling profiles:40*40mm for inlet tube:8mm Screws:3mmNoteMust fititng radiator heartsink when power on, or it will burn the kitThis kit does not comes with PeltierPackage included1 x DIY Thermoelectric Peltier Refrigeration Cooling Kit
5pcs I2C 8-bit I/O Expander Module PCA8574AD Expansion Board RobotDyn for Arduino – products that work with official for Arduino boards
$45.20Expansion Board & ShieldAdd to cartFeatureIf you just don’t have enough digital I/O pins on your for Arduino to interface with all your sensors and controls, you might want to look at using the I2C bus to connect a few port expander chip PCA8574AD have 8 digital I/O bits and can be set to addresses 0x38-0x3F respectively.The I2C bus on …
Ebyte E70-DTU-433NW30-GPRS GPRS Modem 6.5km Wireless Networking Equipment 433MHz 30dbm Networking LoRa RF Module lOT Gateway
$260.04Smart ModuleAdd to cartSpecification Model:E70-DTU-433NW30-GPRSProduct name:iot gatewayProduct advantages:Star self-organizing networkTransmission type:GPRSInterface Type:RS232/RS485Frequency band:433MHzTransmission Range:6.5kmSupply voltage:8 ~ 28V DCSize:108*75*37mmInterface:RS232 RS485Application:Industry Network TransmissionPackage included1 x LoRa RF Module
Reviews
There are no reviews yet.