T.SK106A.03 T.SK105A.03 Universal LCD LED TV Controller Driver Board +7 Key button+1ch 6bit 40Pins LVDS Cable+Speaker+EU Power Adapter

T.RD8503.03 Firmware:Click here to open
T.V53.03 Manual:Click here to open
T.V53.03 Firmware:Click here to open
T.SK106A.03 Manual:Click here to open
T.SK106A.03 Firmware:Click here to open
New Version T.SK105A.03 Manual:Click here to open
New Version T.SK105A.03 Firmware:Click here to open
Note:Since the driver board model is updated frequently, the appearance and chip will be different, please refer to the actual received. If you mind this, please buy carefully.
Description
Model:T.V53.03 (Update from December 25, 2019)
Model:T.SK106A.03 (Update from September 1, 2020) (CN warehouse)
Update Model:T.SK105A.03 (Update from November, 2020) (CN warehouse) The specific model is mainly based on the received model, pay attention to burning the corresponding model firmware.
TV Format:Analog Signal
Support Language:Russian, English, Hindi, Simplified Chinese, Khmer, Vietnamese, Myanmar, French, German, Italian, Spanish.
Input Interface:PC / HDMI / TV / AV / USB multimedia playing
Power Adapter:DC 12V 3-5A
Screen interface:LVDS Single 6
Screen voltage:3.3V / 5V / 12V (Jump cap)
Not only USB interface can be used to upgrade programs, but also can use to play video/music/photo, basically, formats are supported. You can also set a boot display pictures or LOGO and Mirror Enable.
Only supports the resolution of
1920×1200
1920×1080
1680×1050
1680×945
1600X1200
1600×900
1400X1050
1440×900
1366×768
1280×1024
1280×854
1280×800
1280×768
1280×720
1024×768
1024×600
800×600
How to know if your panel suitable for this board
Step 1:Find your LCD model’s resolution (you can check the resolution from this link:http://www.panelook.com/index.php)
Step 2:Find and write in the corresponding firmware.
Programming
1. Put the firmware of ‘SKR8503_100.bin’ in formatted USB flash disk(FAT32), then insert the USB disk and the 7KEY-Button to the board
2. After turn on the power, the light of the 7key button be Red then flash red faster.
IT KEEPS flashing and NEVER STOP. it’s normal, just wait about 1 minute, it means upgrade has finished. then power off and pull off the u-disk. (Note that write programs do not power outages, crashing won’t be able to use)
Package included
1 x Controller Board
1 x English Remote control
1 x IR
1 x 7key button
1 x 1ch 6bit 40Pins lvds cable 250mm length
2 x 4ohm 3W Speaker
1 x EU 12V 4A Power Adapter
Note
The IR & KEY definition is special and different between v29 v56 v59 and 3463A, pls notice and don’t mix up.
This kit is just for signal interface is 1ch 6bit 40Pins and without inverter
If you are not sure, pls provide your lcd panel model number, so we can help you, thanks