20 Egg Automatic Digital incubator Chicken Poultry Hatcher Temperature Control
$115.41
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Color:White
Material:Foam
Power:25W
Power cord Voltage:DC 12V
Adapter voltage:100-240V AC 50/60Hz
Egg capacity:20
Duck egg capacity:15-18
Goose egg capacity:10-12
Size:(L)X(W)X(H)33X20X19cm/12.99inchX7.87inchX7.49inch(appr.)
Adapter:US Standard adapter(We will be based on your country to send the corresponding adapter plug)
Features
※Made of high density foam material, good insulation performance and uniform temperature.
※Suitable for breeding eggs of various sizes, low noise, and easy to use.
※High precision temperature controller with small temperature difference and high hatching rate.
※This is a semi-automatic incubator, which requires manually turning the egg 2-3 times a day when in 3~19day.
※Imitation of hen hatching body temperature.
※With egg light
How To Use
STEP 1:Place the water bag into the Egg Incubator box
STEP 2:Pour warm water(≈30℃) into the water bag
STEP 3:Place the temperature sensor on the water bag and fix it with tape(Be sure to place on the surface of the water bag, contact with the water bag) Then cover the cotton mat on it
STEP 4:When temperature is to stabilize, put the egg in
STEP 5:Cover the cotton mat, starting Incubating
STEP 6:Requires manually turning the egg 2-3 times a day during 3rd -19th day.
Note
* Be sure to test whether the water bag leaks, otherwise it will lead to the risk of short circuit.
* Must ensure that the covered material is breathable and that there is enough oxygen in the incubator.
* Invert the eggs in the incubator every day (2-3 times/day). Do not take away the warmth when turning over the egg.
* The original packaging foam lid does not need to be used during the incubation process.
* You can use potassium permanganate to disinfect eggs according to your actual situation.
* Eggs can be taken by light on the 7th-9th day of hatching
Package included
1 X Egg Incubator
1 X Insulation cotton mat
1 X Water bag
1 X Clip
1 X Water spray bottle
1 X Power adapter
1 X 12V Power cord
1 X Thermometer(Does not contain decorations)
Notice
-Please allow slight deviation of measurement due to manual measurement.
-Due to difference of photographic light, product batches and monitor setting, colors of actual product you get may slightly has unavoidable difference from what you see on your computer monitor, please understand
-Instruction is not included
Weight | 0.723 kg |
---|
Customers Also Viewed
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water Heater
$21.87Laboratory Heating EquipmentsAdd to cartDC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterSpecificationsModel:SSG-2Type:Normally ClosedMaterials:Plastic & CopperDimension:83*90*49cmPipe Inside Diameter:1/2 inchNet Weight:(approx.) 190gFeaturesThis is a DC12V solenoid valve usually used for solar water heater.It can work with water from 1 to 100℃ (or some other liquid).Working Voltage Range:Rated Voltage ±10%Working Water Pressure:0.02 to 0.8MpaThe working water pressure would be too low/high to …
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterRead More
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set Kit
$76.17Terminal BlocksAdd to cartDescription650 Pcs Assorted Ring Insulated Electrical Wire Terminals Crimp Connector Set KitSpecificationQuantity:650PcsMaterial:Copper + PVC+ TinplateInsulated crimp terminals.All are enclosed in plastic case for easy access.The assorted crimp terminals is including50 x Ring M3 Red50 x Ring M4 Red50 x Ring M5 Red50 x Ring M6 Red50 x Ring M8 Red50 x Ring M4 Blue50 x …
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set KitRead More
3.5 inch Protective Enclosure Case Support Dispaly Screen or Cooling Fan for Raspberry Pi
$9.26Raspberry Pi & Orange PiAdd to cartFeatures– Fully updated for Raspberry Pi 3B+/3B/2B– Can support 3.5 inch screen or cooling fan (notes:can not assemble them at the same time)– Heat sink openings for both CPU and LAN chip– High-gloss finish, surface mountableSpecificationsColor:BlackMaterial:ABSSuitable for Raspberry Pi 3B+/3B/2BWeight:45gSize:9cm*6.2cm*3.4cmPackage Included1x ABS Case4x Non-slip mat4x Screws
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module for
$47.25DIY Electronic KitsAdd to cartDescription1. Use TM1650 (compatible with AIP650) digital tube driver chip, support 8-level brightness adjustment, working voltage 3.3V ~ 5.5V2. IIC interface, only need 2 ordinary IO can drive, do not need to repeat scanning of MCU, saving MCU resources.3. 4 digit 0.56 inch red common negative digital tube with decimal point.4. 0.56 inch with four …
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module forRead More
WEAH-81 Car Heavy Bass Frequency Divider High and Low 2-way 2 Bass Crossover Upgrade Tool
$33.09Amplifier BoardAdd to cartFeatureBrand:WEAHModel:81Power:100WApplicable impedance:4-8ohmFrequency response:100Hz ~ 45HzDimensions:133 x 95 x 44mmApplication environment:Car or home speaker DIYPackage includes1 x Bass Frequency DividerHow to Wire:
5pcs 8-36W intelligent Sensor LED Ceiling Light And Sound Control Power Supply Module Bulb Panel Light Built-in Power Driver
$21.42Power Supply ModuleAdd to cartDescriptionInput Voltage:AC185-265VOutput Current:0.22AOutput Voltage:24-108VEfficiency:90%Working Frequency:50/60HZOutput Power:8-24WSound Control:50-75dBLight control:7-20LuxDiameter:25.8mmFeature1. The combination of sound and light control, when the light is strong, does not work, the light intensity is lower than 12-15LUX, and the sound of the induction 27-36DB starts automatically.2. Delay 40-60S automatically extinguished, easy to install, compatible with ordinary switches, no additional wiring.3. Single trigger, …
Reviews
There are no reviews yet.