433MHz Voice APP Remote Control Switch Relay Smart Switch 10A Smart ON-OFF Device
$65.60
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specsification
Remote relay receiver
– IEEE:802.15.4MAC/PHY
– 433mhz, AC90-250V ,50/60Hz.
– Load power:MAX 10A
– Switch size:89*51*26 (mm)
– Encrypted connection, no signal interferences between switches
– Can be paird to 20 remote control max at the same time
Notice:The switch can cut off the ‘L’ and ‘N’ lines at the same time, which is safer and completely solves the influence of the return current on the device.
How to connect to ZigBe
Notice:A compatible ZigBe Gateway is required if you want to use this switch by app. we do not supply gateway.
1. Power on your ZigBe Gateway,press and hold the pairing button for 5 seconds, light blink;
2. Open“TUYA”or“SMART LIFE”app, connect to 2.4G/4G network, find device, add your gateway when it is discovered.
Search TUYA ,Smart Life on store app
3. Power on the switch,green light on ,then press and hold pairing button for 8 seconds,green light blinks;
4. Enter into the gateway on“TUYA”app, press“+”to add subdevice,add this switch when it is discovered;
5. Compatible with Smart speakers:Amazon Alexa or Google Home.
If your smart speaker is with ZigBe Gateway module inside,then no need extra gateway, you can control our ZigBe switch by your smart speaker directly. For example:ECH0 plus, ECH0 show 2nd,ECH0 studio;
How to set remote mode
1. Power on the switch,green light on,
Find the remote pairing button aside;
2. Clean code ,clear all remote control data
Press the remote pairing button 8 times to clean code if you want to reset mode(LED flash 3 times fast then off).
But no need to clean code if you add more remote
3. Setting Toggle Mode
Press pairing button 2 times fast,red LED light on and flash slowly,press the remote control button,red LED flash 3 times then come off. Setting successfully.
(Press remote control button, the receiver’s relay is ON,press button again,the receiver’s relay is OFF)
4. Setting Latched Mode
(Note:When you choose“Latched Mode”,you need to setting two different buttons on the remote control,the first time learn is for“ON”,the second time learn for“OFF”.For example:button A=ON,button B=OFF)
Press the pairing button 3 times fast,red LED light on and flash slowly,then press the remote button A,red LED flash 3 times, then press the remote button B, red LED flash 3 times again ,and then come off,settingsuccessfully.
(Press remote button A,relay on,press remote button B,relay off)
1. Share Control
The owner can share the devices to other“Smart Life”accounts.While sharing devices,both should stay online on“Smart Life”.Because if the account you want to share is not online,he/she will not receiver the invitation message.
Package includes
1 x Remote control
2 x Receiver
Weight | 0.172 kg |
---|
Customers Also Viewed
20pcs ADC CMOS CD74HC4067 16CH Channel Analog Digital Multiplexer Module Board Sensor Controller
$34.67Sensor & Detector ModuleAdd to cartDescription1. This is a board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch – it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can’t be higher …
10pcs Geekcreit Colorful 3D Mini SMD PCB Stereo Christmas Tree DIY Music Kit
$45.51DIY Electronic KitsAdd to cartDescriptionThis is a simple mini Christmas tree DIY kit. Three different PCBs are combined into a 3D stereo Christmas tree model. A variety of different colors can be selected. It can be powered by a button battery and can be free from the power supply. Built-in 7 LED gradient modes plus 7 different Christmas melody.Manual:Click …
10pcs Geekcreit Colorful 3D Mini SMD PCB Stereo Christmas Tree DIY Music KitRead More
1 Copper Sheet + 2 Aluminum Sheets Heatsink Kit with Black Glue for Raspberry Pi 4B
$9.10Raspberry Pi & Orange PiAdd to cartDescriptionsThe colorful set is 1 copper sheet and 2 aluminum sheets. They are designed for Raspberry Pi 4B for heat dissipation.Package Included1 x Copper Sheet2 x Aluminum Sheets
pyWiFi- ESP8266 Development Board Micro-Python IoT Wireless WiFi Learning Kit
$90.96Motherboard & Development BoardAdd to cartpyBase Boardpyboard interface:support pyboard, pyWiFi-ESP32, pypyWiFi-ESP82662.54mm pin header:lead out all interfaces of pyboardButton * 2:RST and USR buttons are brought outPotentiometer:ADC inputPassive buzzer:DAC outputButton battery holder:Install CR1220 button batteryServo interface:servo interface * 1- * 4 (external isolation circuit is required to connect the servo)OLED interface:4P / 0.96inch / I2C / OLED Display1.77 Inch LCD interface:suitable …
pyWiFi- ESP8266 Development Board Micro-Python IoT Wireless WiFi Learning KitRead More
3pcs 433MHZ High Power Wireless Transmitter Module 3000M Long Range ASK Transceiver Board
$29.79Smart ModuleAdd to cartFeatureProduct Name:Wireless 3000m Transmitter ModuleProduct type ZAB-3000 (without coding)Dimensions:45mm*17mm*6.2mmWorking voltage:DC 9V ~12VWorking current:200~220mAOperating frequency:433MHzTransmit power:>10mwLaunch distance:2000-3000 metersRadiated power:1.5 WModulation method:ASKQuiescent current:0uARated parameter:Symbol:ValueDC supply voltage:VDD-VSS:5VStorage temperature range (TS):TSTG:-12°C to 75°CWelding temperature:+260°C:PIN:Description1:ANT:RF signal input pin, this pin should be connected to the antenna2:VSS:Positive power supply3/4:GND:Negative power supply5:DATA:Data signal output, compatible with CMOS levelsPackage includes3 x Wireless 3000m …
3pcs 433MHZ High Power Wireless Transmitter Module 3000M Long Range ASK Transceiver BoardRead More
10Pcs DHT11 Digital Temperature Humidity Sensor Module for
$25.06Electronic Accessories & SuppliesAdd to cart10Pcs DHT11 Digital Temperature Humidity Sensor Module For Description DHT series numeric humiture sensor Humidity measuring range:20%-90%RH(0-50°Ctemperature compensation) Temperature measuring range:0 to +50°C Humidity measurement accuracy:±5.0%RH Temperature measurement accuracy:±2.0°C Response time Low power consumption Size:about 2.3cm x 1.2cm x 0.5cm Applications HVAC Testing and inspection equipment Automotive Data logger Consumer goods Automatic control Weather station …
10Pcs DHT11 Digital Temperature Humidity Sensor Module forRead More
Reviews
There are no reviews yet.