5Pcs 5V 1A/2.1A Dual USB Lithium Battery Charging Board with LCD Display Output Charger Module DIY Charger
$42.73
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specificatons
Input charging voltage:DC 5V 1A
Input battery voltage:DC 3.7V-4.2V Polymer Rechargeable Lithium Battery
Output channel:2CH
Output voltage:5V2.1A/5V1A
Operating Temperature:-20→~85→
Operating Humidity:5%~95%RH
Button Function:Double click to turn ON/OFF LED flashlight
Module Size:66*21*15mm
Features
1.Support LCD Display
2.Support discharge while charging
3.Support dual USB output
4.Automatically turn off the backlight after 30second
Note
1>.2.1A is the max output current.It is not a constant current power module.Its output current change by load!It can not keep output 2.1A fixed.
2>.Old and new batteries can not be mixed.
3>.The battery cannot be reversed, otherwise the module will be damaged.
4>.Please check the battery voltage first. If the battery voltage is lower than 3.2V, the module will not work properly.
5>.Please input from Micro USB socket to activation module at first before connect battery.
Frequency Asked Questions
1>.What kind of battery to choose
Q:It is used for lithium battery.Battery can not be built-in protection board.The following battery is not suitable:Old battery;New and old batteries;Different capacity batteries;Different brands
2>.Why no output voltage
Q:Please input voltage from micro USB if there is no output from standard USB after connect battery.
3>.What is the conversion efficiency
Q:About 80% for new real battery.
4>.Why does the charger lose power or shut down automatically
Q:Poor battery quality, high internal resistance.You can change new battery or use better cable or output high current.It can change another USB output to connect to load.The two USB output:left one maximum output 1A;right one maximum output 2.1A.
5>.Why doesn’t the charge when charge up to 99%
Q:If it is a new battery,please discharged for the first time and then shutdown the module.Then recharging.
If it is the old battery,please discharged again and recharged once.If it is still the same, it is because of the large internal resistance of the battery and the inconsistent capacity.
6>.Why the percentage display is inaccurate
Q:Please discharged at first and then recharging.
Package Included
5 x 5V 1A/2.1A Dual USB Lithium Battery Charging Board with LCD
Weight | 0.085 kg |
---|
Customers Also Viewed
CP2102 USB To TTL/Serial Module Downloader
$10.11Converter BoardAdd to cartCJMCU CP2102 USB To TTL/Serial Module UART STC Downloader For Driver Installation Introduction:http://forum.hobbyant.com/forum-topic-56275.html Description CJMCU-CP2102 its highly integrated, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM and asynchronous serial data bus (UART), supports full-featured modem signal without any external USB devices. CJMCU-CP2102 works with other USB-UART adapter circuit similar to the driver through …
24x12x1 inch Aluminum Silicate High Temperature insulation Ceramic Fiber Blankets
$56.69FabricsFibers & TextilesAdd to cartDescription24x12x1 Inch Aluminum Silicate High Temperature Insulation Ceramic Fiber BlanketSpecificationMaterial:Aluminum SilicateSize:61x30x2.5cm / 24 x12 x1 inchClassification temperature:1260 ℃Long-term temperature:1100 ° CThermal conductivity:0.03Applications* Furnace, heating equipment, pipelines and other lining or wall lining insulation* Furnace door, lid, roof and other heat sealing* Chemical, electrical, high-rise building insulation fireFeatures* Seismic heat resistance* Low thermal conductivity and low …
24x12x1 inch Aluminum Silicate High Temperature insulation Ceramic Fiber BlanketsRead More
10pcs EQKIT AMP-1 TDA2822M Power Amplifier Amplify Module DIY Kit Electronic Production for Diy Kit Electronic PCB Board Module
$82.12DIY Electronic KitsAdd to cartDescriptionPackage Name:TDA2822M AmplifierKit Model:AMP-1Working voltage:DC4.5-9VPCB size:51*36mmSpeaker Size:50mmSpeaker Power:0.25WAMP-1 amplifier using TDA2822M acts as amplifier chip, this chip is STMicroelectronics (ST) developed dual-channel monolithic power amplifier IC, usually in the pocket cassette player (WALKMAN), tape recorders and multimedia speaker in for the audio amplifier. Has a simple circuit, good sound quality, wide voltage range and other …
5Pcs PS2 Game Joystick Switch Sensor Module
$10.92Sensor & Detector ModuleAdd to cart5Pcs PS2 Game Joystick Module For Description This is PS2 game joystick module for Lots of robot projects need joystick. This module provides a affordable solution to that. Simply connect to two analog inputs, the robot is at your commands with X,Y control. It also has a switch that is connected to a digital pin. …
100W Outdoor Sunpower Foldable Solar Panels Cells Waterproof Fast Charger Solar Panel
$97.19Solar PanelAdd to cartFeatures1. High efficiency, fast charging.2. Small size, super thin, waterproof, easy to operate, wide range of application3. Easy to carry, with a handle.4. It is more than 5% higher than ordinary efficiency.5. Solar energy conversion efficiency:25%Specifications–Output voltage:USB5V + DC18V–Output current:20A, 5.5A–Color:Black–Solar panel type:Monocrystalline silicon–Conversion efficiency:>25%–Output interface:USB–Open Size:680mmx305mm/26.7inx12in–Folding size:170mmx305mm/6.7inx12inPackage Included–1X Soalr Panel–2X Carabiner–1X USB cable
Reviews
There are no reviews yet.