220V Heat Quartz Aquarium Water Heater Submersible Fish Tank thermostat 3 M Cable 50-500W
$25.87
Power 500W / Power 300W / Power 200W / Power 100W /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Automatic thermostat
Temperature control range:20 ~ 34°C
Material:High quanlity quartz glass
Voltage:220V
Frequency:50Hz
Wattage:50W /100W / 200W / 300W / 500W
Color:Black
Power:Heater Length:Cable Length:Recommended Aquarium
50W:230mm:1.3 M:up to 50 litres
100W:270mm:1.3 M:50 to 100 litres
200W:330mm:3 M:150 to 200 litres
300W:390mm:3 M:200 to 300 litres
500W:470mm:3 M:300 to 500 litres
Product Features
– 3 M Cable (200/300/500W)
– Automatic thermostat
– Precise & Reliable temperature control
– Fully submersible
– Double seal waterproof
– Ideal for Freshwater or Saltwater
– Easy to set required temperature with temperature scale
– High Quality Components
– High temperature resistance and wear resistance
– All heaters come supplied with 2 x sucker holder clips
Using
1. The heating rod of the fish tank must be completely immersed in water to avoid dry burning.
2.When the power supply of the heating rod is pulled out, it needs to continue cooling for more than half an hour before the water surface can be taken out, so as to prevent the waste heat of the rod from producing high temperature and causing serious damage to the heating rod. (don’t forget when changing water)
3.If the hand wants to go into water, it must cut off the power supply of all equipment in the cylinder (filter, heating rod, aquarium lamp) to ensure safety. Do not use wet hand to plug in the power supply.
4 Before using this product, please ensure that the aworking voltage indicated on the product is in accordance with the main voltage. It is recommended that the power supply of the product be equipped with a short-circuit leakage protection switch whose rated work current is less than 30 mA.
Note!!
Glass products, do not knock or fall.
The heating rod must be cooled before it can be put in or taken out of the tank.
Packing
1 x Aquarium Quartz Heater
1 x UK Adapter
2 x Sucker Holder Clips
Weight | 0.4 kg |
---|
Customers Also Viewed
5pcs TS-300B Turbidity Sensor Detection Module Water Quality Tester Washing Machine Turbidity Transduce
$43.93Sensor & Detector ModuleAdd to cartPrincipleTurbidity sensor TS-300B measures the turbidity (counter of suspended matter) in the wash water. Based on the optical principle, the sensor uses the light-emitting diode and phototransistor to receive the specific wavelength to measure the opacity or other substances of dirty water. concentration. By using phototransistors and light-emitting diodes, the light emitted by the sensor …
3Pcs USB Fan Speed Controller Module Reducing Noise Multi-stall Adjustment Governor DC 4-12V
$20.74Motor PWM Speed ControllerAdd to cartFeatures– USB Fan Air Conditioner – Strong winds and weak wind adjust freely – Stepless Speed Regulation – Suitable for the very common 5.0V USB fan on the market Regulation PrincipleThe non-adjustable fan is a 5V direct fan motor,while the two-stall fan is the interior has a step-up circuit board,when placed in the second gear,the …
5pcs JDY-08 BLE bluetooth 4.0 Serial Port Wireless Module Low Power Master-slave Support Airsync i Beacon
$45.12Smart ModuleAdd to cartFeaturesJDY-08 transparent transmission module is based on bluetooth 4.0 protocol standard, working frequency range is 2.4GHZ range, modulation mode is GFSK, large transmission power is 0db, large transmission distance is 80 meters, TICC2541 chip design is adopted, and users can modify device name by AT command. , service UUID, transmit power, pairing password and other …
ADC Module ADS1100 for Analog Signal Capture Converter Compatible M5StickC ESP32 Mini IoT Development Board Fi
$14.74Converter BoardAdd to cartnull Description ADC_HAT is another type of C-HAT specifically design for M5StickC controller. Same as ADC unit, this is an ADC converter component for stickc. Packed with an ADC converter chip ADS1100, which is a fully differential, 16-bit, self-calibrating, A/D converter. Extremely easy to design with and configure, the ADS1100 allows you to obtain precise …
5pcs Mini MP1584EN DC-DC BUCK Adjustable Step Down Module 4.5V-28V input 0.8V-20V Output
$8.94Power Supply ModuleAdd to cartSpecificationsModel:MP1584Name:DC-DC step-down moduleInput Voltage:4.5V ~ 28VOutput voltage:0.8V ~ 20VOutput Current:3A (Max)Conversion efficiency:96% (maximum)Output RippleSwitching frequency:1.5MHz (highest) typically 1MHzOperating Temperature:-45°C ~ +85°CSize:22mm * 17mm (L * W )Application areas:DIY mobile power, monitor power supply, power buggies, camera power supply, car power, communications equipment supply,etc.Packge included5 x Step Down Module
LILYGO TTGO T-Koala ESP32 WiFi and bluetooth Module 4MB Development Board Based on ESP32-WROOM-32 Micro USB
$26.23Smart ModuleAdd to cartFeatureEspressif official ESP32-WROOM-32 moduleLatest ESP32 version:REV14MB FLASHLithium battery interface, 500mA maximum charging currentCompatible with , MicroPythonDefault firmware:latest MicroPythoTechnical specificationsMicrocontroller:ESP-32Board power supply:(USB) 5VSupport battery:Lipo Battery 3.7VWorking voltage:3.3VFlash:4 MbytesLength:78 mmWidth:27 mmWeight:7.8 gramsPackage includes1 x ESP32 WiFi&bluetooth Broad2 x Pin
Reviews
There are no reviews yet.