220V To 380V 7.5KW Variable Frequency Speed Control Drive VFD inverter Frequency Converter Frequency Changer
$566.99
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Type selection instruction
1. Please read the product instructions carefully, choose the type according to the function and power you need, and avoid the damage caused by wrong wiring.
2. This frequency converter can not drive other load types except inductive load such as motor . Please pay special attention to it when purchasing.
3. The overload capacity of 220V to 380V frequency converter is small. Please choose at least one higher power level. When the load is very large (such as gear pump hydraulic pump) or there is a blocking condition, please choose carefully.
4.This machine does not support quick stop. The start of the motor needs to be controlled on the product panel.
5. If you don’t know how to choose the type, you can also contact us to give you some suggestions.
This VFD can be used for constant torque loads ( such as hard starting:Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc).
It can be used as a motor speed control and a phase converter. The inpute for this VFD is 1 phase as you like. You can control the different speed as you like when yo use this VFD.
You can use for:Pumps & Conveyors,water pump,textile machine,wooden cuter,blower etc and then performance excellently. This item use Sine wave PWN(SPWM ) for the control system and performace excellently.
Features
1. Frequency setting mode:digital setting, analog setting, serial communication setting, multi-speed, PID setting.
2. PID control function
3. Multi-speed control function:8-speed control
4. Swing frequency control function
5. Instantaneous power outage without stopping function
6. REV / JOG key function:user-defined multi-function shortcut keys
7. Automatic voltage adjustment function:When the grid voltage changes, the output voltage can be automatically maintained constant
8. Provide up to 25 kinds of fault protection:over-current, over voltage, under voltage, over temperature, phase loss, overload and other protection.
Specification
Inverter Series9100-1T3-00750G
Power7.5KW 16A
Control ModeSPWM
Input Voltage220V(+/-15%) AC
Output Voltage380V/AC
Input Frequency 0-50/60Hz
Output Frequency 0 – 650 Hz
Input Phase1 phase (1 phase for 220V)
Output Phase3 phase (3 phase for 380V)
4Digits Display & Status
Indicator Lamp Displaying frequency, current, revolution, voltage, counter, temperature,
forward or reserve running, and fault, etc.
Communication ControlRS-485
Operation Temperature-10~40℃
Humidity0-95% Relative Humidity(without dew)
VibrationBelow 0.5G
Input and output characteristics
Input voltage range:220V±15%
Input frequency range:47~63Hz
Output voltage range:0~rated input voltage
Output frequency range:0~650Hz
Peripheral interface features
Programmable digital input:4 inputs
Programmable analog input:AI1:0~10V input, AI2:0~+5V or panel potentiometer input
Open collector output:1 output
Relay output:1 output
Analog output:1 output, optional 4~20mA or 0~10V
Technical performance characteristics
Control:PG-free vector control, V/F control
Starting torque:without PG vector control:0.5Hz / 150% (SVC)
Speed ratio:no PG vector control:1:100
Speed control accuracy:PG vector control:± 0.5% of the maximum speed
Carrier frequency:0.5k ~ 15.0kHz
Package included
1 X Variable Frequency Drive VFD Inverter
1 X Accessories Set
1 X English Manual
>>Please to download the English user manual
Weight | 2.893 kg |
---|
Customers Also Viewed
5Pcs CP2102 USB To TTL/Serial Module Downloader
$21.98Converter BoardAdd to cart5Pcs CJMCU CP2102 USB To TTL/Serial Module UART STC Downloader For Driver Installation Introduction:http://forum.hobbyant.com/forum-topic-56275.html Description CJMCU-CP2102 its highly integrated, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM and asynchronous serial data bus (UART), supports full-featured modem signal without any external USB devices. CJMCU-CP2102 works with other USB-UART adapter circuit similar to the driver …
10pcs 180 Degree USB 3.0 Type A female Socket Connector SMT Charging Socket Plug Connector
$10.11Terminal BlocksAdd to cartSpecificationsColorBlueRated Current1.5ARated Voltage30VInsertion Force35N MaxDurability3000 Cycles Min Rubber CorePBT / Icp Ul94V-0 Resistance To Voltage500V Ac Min. Insulation Resistance≥1000MΩPull-Out Force10N Min.Initial 8-20N AfterWorking Temperature-20 Degrees To 60 Degrees Contact Impedance≤30mΩTerminalsBrass C2680,Nickel Base,Gold-Plated 1 u,Package included-10pcs X 180Degree Connectors
Dual Servos Knob Serial Port Control Board Futaba MG995 SG90 Steering Gear Debugging Module
$13.11Other Module BoardAdd to cartFeature1. The onboard stable 8-bit MCU is used to generate high-resolution PWM signals with precise control.2. Support manual mode and return to medium mode, switch by button, with mode indicator.3. Support knob adjustment or serial command control in manual mode.4. The serial port command control can use the matching host computer software or connect to …
Dual Servos Knob Serial Port Control Board Futaba MG995 SG90 Steering Gear Debugging ModuleRead More
Keyes Brick Laser Head Sensor Module (pad hole) with Pin Header Board Digital Signal
$4.36Sensor & Detector ModuleAdd to cartDescriptionThis sensor is fully compatible with ARDUI NO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. It is mainly composed of a laser head, which is composed of a light-emitting tube core, a condenser lens, and a copper adjustable sleeve. After connecting to the power supply, we directly input …
Keyes Brick Laser Head Sensor Module (pad hole) with Pin Header Board Digital SignalRead More
5pcs DC3~5V AK-119 433.92MHZ 4 Pin Superheterodyne Receiver Board without Decoding -105dBm
$10.37Other Module BoardAdd to cartFeatures1. The product is small in size, high in sensitivity and strong in anti-interference ability;2. The same definition as the four-pin pin of RXB12, the usage is the same. The unit price is lower than RXB12 and can be directly replaced.Technical ParametersWorking voltage:DC3~5VTransmission rate:4.80KBPSQuiescent current:6mAReceive sensitivity:-105dBmDimensions:30 * 9 * 5mmWorking temperature:-20 ° C ~ +80 …
5pcs DC3~5V AK-119 433.92MHZ 4 Pin Superheterodyne Receiver Board without Decoding -105dBmRead More
150g Capacity Quartz Silica Melting Crucible Pot for Gold Silver Platinum Refine
$16.19Glassware KitAdd to cart150g Capacity Quartz Silica Melting Crucible Pot For Gold Silver Platinum RefineDescriptionMaterial:quartzCapacity:150gDiameter:43X57mm/1.69inch X2.24inch(ID*OD)Height:20mm/0.79inchDeepth:15mm/0.59inchNet Weight:40gFeatureQuartz silica melting crucibleProduced by modern ceramic processing technologyHigh orrosion resistance and strength,the temperature resistance up to 2800℃/5072FPerfect for gold silver casting and refine usagePackage included1X Quartz Silica Melting Crucible
WXD3-13-2W Precision Potentiometer 470R 470 Ohm Wirewound Multi-Turn Potentiometer
$4.50Module ComponentsAdd to cartSpecificationsResistance range:470┯Resistance tolerance:÷ 5%Rotation angle:3600 ÷ 20 Number of laps:10 lapsRated voltage:160VStarting torque:3.5 ~ 100mN.mRated power:2W (85 →) 0W (125 →)Linearity accuracy:÷ 0.3%Mechanical durability:10,000 weeksPackage included1 x Potentiometer
Reviews
There are no reviews yet.