1.2W 180L/H Brushless Solar Panel Fountain Water Pump for Garden Pool Pond Aquarium Fountain
$34.41
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Features
Solar Water Feature Pump Kit – Comes with fitting accessories and 4 Types of sprinkler Heads for different water flows and water heights. Maximum Flow Quantity of Pump:180L/H; Water Height Range of Pump:30-60cm(11.8-23.6in).
High Effeciency & Low Power Consumption -The solar pond pump will start automatically after a few of seconds in bright sunlight, Eco-friendly, Energy-saving, Low-cost Solution without battery.The solar panels are processed from tempered glass, which is durable, wear-resistant and resistant to aging.
Easy to Use – Easy to install and use, come with a solar Panel(NO power storage function), and charged by the sun, ,no battery or electricity needed. Please note that this solar power pump kit is driven by the sunshine, it needs the full sunshine to start working (direct sunlight, no shadow or cloud).
Brushless water pump, lower consumption and pumps water easily, can create Relaxing scene, which is perfect for bird bath, fish tank, small pond, garden decoration, water circulation for oxygen.
The solar water fountain pump has a built-in brushless motor that provides a longer service life(About 20,000 hours).
Specifications
Size:110x110mm
Rated Voltage:7V
Rated Current:171MA
Power Consumption:1.2w
Life Span:30~50cm
Flow Rate:180L/H
Outlet:8mm
Pump noise
Lifetime:20,000 hours
Weight:250g
Cable Length:300cm
Heat Resistance:0~45 Celsius
Operation Suggestions
1.Put the pump totally in the water with its nozzle over the water.
2. Do not put solar panel in water and make sure it is under enough sunshine.
3. Make sure no leaf or anything else shade any part of solar panel.
4. Pull out the plug(the head part) first, and make the pump work for seconds to let the air go out of the pump.
5. Then put on the plug to see if it could work well.
Tips of Using the Pump
Don’t make the pump work without water for a long time, or its lifespan will be shortened.
Please put the pump into water and keep the solar panel out of water; otherwise it will get damaged and couldn’t work.
Clean the pump regularly especially the water outlet and spray caps to prevent it from getting stuck.
Change water frequently to keep water clean to avoid any dirt to impede the pump.
Always keep the surface of solar panel clean to well absorb sunlight.
Package included
1 x Solar Pump
4 x Spray Nozzles
1 x Manual in English
Weight | 0.23 kg |
---|
Customers Also Viewed
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-W
$90.79Amplifier BoardAdd to cartSpecifications– Supply Voltage:2.7v-5.5v @ 3mA current– Output:2Vpp on 1.25V bias– Frequency Response:20Hz – 20KHz– Programmable Attack and Release Ratio– Automatic gain, selectable max from 40dB, 50dB or 60dB– Low Input-Referred Noise Density of 30nV/– Low THD:0.04% (typ)– Low Power Shutdown Mode– Built-in 2V low-noise microphone bias– -40°C ~ +85°C extended temperature rangePackage included10 x Microphone …
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-WRead More
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMP
$19.04Amplifier BoardAdd to cartFeature1. The power to more than 12V current 3A2. The speaker is best to use an impedance of 4 ohms, some of the high sensitivity3. For some signal level is relatively low tone, to add the preamplifier to play the effect4. Note the positive and negative can not be reversed, use the power supplyElectrical CharacteristicsIts …
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMPRead More
Mega 2560 R3 ATmega2560-16AU Control Module without USB Cable
$44.54Motherboard & Development BoardAdd to cartDescriptionThis is compatible R3 Mega2560 ATmega2560-16AU control board without USB cableMega is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal …
Mega 2560 R3 ATmega2560-16AU Control Module without USB CableRead More
20W 420*380*3mm Folding PET Monocrystalline Silicon Solar Panel with Cable Dual USB
$93.62Smart Robot & Solar PanelAdd to cartSpecificationsMaximum Power(Pmax):20WOpen Circuit Voltage(Voc):18VMaximum Power Voltage(Vmp):12vMaximum Power Current(Imp):1.1AMaximum System Voltage(Imp):1000vOutput:USB 5V & DC 18VQuantity of cell:36Cell Effcience %:20%Output Tolerance:±10%Size:425*380*3mmStandard Test Conditions:Irradiance 1000w/m2Temoerature 25.C,AM=1.5Package Included1 x Solar panel with cable
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLC
$45.10Relay ModuleAdd to cartDescriptions– Operating Voltage:DC 5V(5V Version)– Operating Current:10-15MA– inchopeninch inchcloseinch inchMomentaryinch inchSelf-lockinginch inchInterlockinch inchDelayinch 6 Commands– Two instruction-control mode:AT command and MODBUS command– Under the AT command ,the maximum delay is 9999 seconds– Under the MODBUS command ,the maximum delay is 255 seconds– AT commands can be made serial HyperTerminal (serial assistant) Enter;– MODBUS commands can …
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLCRead More
LT1083cp 7A AC 35V Rectifier Filter Power Supply Board DIY Home theater Sound Amplifier Voltage Regulator
$24.04Power Supply ModuleAdd to cartDescriptionLT1083CP feature description (emphasis):It is a linear step-down block. Although the voltage adjustment can be adjusted from 2.5V to 37V, it is recommended that the working differential pressure is within 10V, because the power consumption is proportional to the differential pressure, the greater the differential pressure, the more heat The larger the output current, the …
Reviews
There are no reviews yet.