1.2W 180L/H Brushless Solar Panel Fountain Water Pump for Garden Pool Pond Aquarium Fountain
$34.41
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Features
Solar Water Feature Pump Kit – Comes with fitting accessories and 4 Types of sprinkler Heads for different water flows and water heights. Maximum Flow Quantity of Pump:180L/H; Water Height Range of Pump:30-60cm(11.8-23.6in).
High Effeciency & Low Power Consumption -The solar pond pump will start automatically after a few of seconds in bright sunlight, Eco-friendly, Energy-saving, Low-cost Solution without battery.The solar panels are processed from tempered glass, which is durable, wear-resistant and resistant to aging.
Easy to Use – Easy to install and use, come with a solar Panel(NO power storage function), and charged by the sun, ,no battery or electricity needed. Please note that this solar power pump kit is driven by the sunshine, it needs the full sunshine to start working (direct sunlight, no shadow or cloud).
Brushless water pump, lower consumption and pumps water easily, can create Relaxing scene, which is perfect for bird bath, fish tank, small pond, garden decoration, water circulation for oxygen.
The solar water fountain pump has a built-in brushless motor that provides a longer service life(About 20,000 hours).
Specifications
Size:110x110mm
Rated Voltage:7V
Rated Current:171MA
Power Consumption:1.2w
Life Span:30~50cm
Flow Rate:180L/H
Outlet:8mm
Pump noise
Lifetime:20,000 hours
Weight:250g
Cable Length:300cm
Heat Resistance:0~45 Celsius
Operation Suggestions
1.Put the pump totally in the water with its nozzle over the water.
2. Do not put solar panel in water and make sure it is under enough sunshine.
3. Make sure no leaf or anything else shade any part of solar panel.
4. Pull out the plug(the head part) first, and make the pump work for seconds to let the air go out of the pump.
5. Then put on the plug to see if it could work well.
Tips of Using the Pump
Don’t make the pump work without water for a long time, or its lifespan will be shortened.
Please put the pump into water and keep the solar panel out of water; otherwise it will get damaged and couldn’t work.
Clean the pump regularly especially the water outlet and spray caps to prevent it from getting stuck.
Change water frequently to keep water clean to avoid any dirt to impede the pump.
Always keep the surface of solar panel clean to well absorb sunlight.
Package included
1 x Solar Pump
4 x Spray Nozzles
1 x Manual in English
Weight | 0.23 kg |
---|
Customers Also Viewed
Multiple Car Toys Magnetic Puzzle Box Book Educational Book Kids Learning Gift
$52.64MathematicsAdd to cartPackage included10 x Card76 x MagnetsFeatures1.Developing kids’ intelligence.2.Teaching kids to know more words.3.Easy for storage.SpecificationsColor:MulticolorMaterial:Paperboard, MagnetismSize:30x4x21.5cm
Basic Starter Kit UNO R3 Mini Breadboard LED Jumper Wire Button with Box for Geekcreit for Arduino – products that work with official Arduino boards
$18.62Module KitsAdd to cartDescriptionsPerfect for Shield Prototyping and TestingPlastic housing, metal contact clipsAccept wire with diameter 20-29AWGVolatge/current:300V/3-5A400 tie-point2 Power Lanes, Tie-point 1001 Double-strip, Tie-point 300Solderless Breadboard Size:82x55x8.5mmPackage included1 x Uno R3 Development Board1x 400 hole Breadboard10 x 220Ω resistor 5% carbon film10 x 1k resistor 5% carbon film10 x 10k resistor 5% carbon film10 x 100k resistor 5% …
3pcs ESP32-S WiFi + Bluetooth ESP32S Serial to WiFi Dual Antenna Module
$29.27Smart ModuleAdd to cartDescriptionThe main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and computing power of up to 600DMIPS.Default 32Mbit SPI Flash, 520KB SRAMSupport SoftAP and Station modeUltra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleSupport UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.Support for firmware upgrade (FOTA)Antenna supports onboard antenna or IPEX block outputPackage includes3 x Wifi module
Geekcreit 433MHz DC 12V 10A Relay 1CH Channel Wireless RF Remote Control Switch Transmitter with Receiver
$15.30Smart ModuleAdd to cartIf you need more Transmitter, please buy Product ID:1215079>>>Manual:Click here to openFeaturesEasy to install and easy to carryWith a slidable cover on the remote controlWith a hook on the remote controlUse Learning coding, stable and reliableThe wireless signal can pass through walls, floors and doorsYou can turn on or turn off the receiver with transmitter …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStream
$56.69Electrical Pump & ValveAdd to cartFeature*CO2 Refill Adapter is used to fill CO2 into your Sodastream tank.*Adjustable valve pin ensures compatibility with any cylinder valve variation.*Easy to install and use.*Made of high quality metal, high hardness and durable.Specification*Material:Metal*Color:Silver (As Pictures Show)*Inner Thread:TR21-4*Outer Thread:W21.8-14Package Contents1*CO2 Refill AdapterNotes:The real color of the item may be slightly different from the pictures shown on …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStreamRead More
30pcs 2.5-5.5V TTP223 Capacitive Touch Switch Button Self Lock Module
$15.15Other Module BoardAdd to cartFeatures 1. Size:15*11mm 2. Power:2.5-5.5V 3.Trigger setting mode:(1->Short;0->No Short) AB=00:No-lock High TTL level output; AB=01:Self-lock High TTL level output; AB=10:No-lock Low TTL level output; AB=11:Self-lock Low TTL level output; Package included 30 x 2.5-5.5V TTP223 Capacitive Touch Switch Button Self-Lock Module For
NE555 Pulse Module LM358 Duty and Frequency Adjustable Square Wave Signal Generator Upgrade Version
$6.55Test & Measuring ModuleAdd to cartFeature1. Used as a square wave signal generator to generate square wave signals for experimental development.2. Used to generate a square wave signal that drives the stepper motor driver.3. Generate adjustable pulses for use by the MCU.4. Generate adjustable pulses to control the associated circuitry.Description1. Size:3.5CM * 4.6CM1. The main chip:LM358;2. Input voltage:5V-12VDC.3. Input current:≥100MA;4. …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module Kit
$13.73DIY Electronic KitsAdd to cartFeatureModel:AUL-10Supply voltage:DC9V-12VAudio input:0~1.5VrmsPCB size:66 x 28mm (L x W)Light row size:62.5 x 5 x 10.7mm (L x W x H)Two indication modes:bar indication and fire spot indication (Realized by MOD short-circuit point)Lamp row offers two kinds of vertical and horizontal installationTin-treated solder padsNote:Before power on, please confirm the polarity of the power supply is correct …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module KitRead More
Reviews
There are no reviews yet.