1.2W 180L/H Brushless Solar Panel Fountain Water Pump for Garden Pool Pond Aquarium Fountain
$34.41
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Features
Solar Water Feature Pump Kit – Comes with fitting accessories and 4 Types of sprinkler Heads for different water flows and water heights. Maximum Flow Quantity of Pump:180L/H; Water Height Range of Pump:30-60cm(11.8-23.6in).
High Effeciency & Low Power Consumption -The solar pond pump will start automatically after a few of seconds in bright sunlight, Eco-friendly, Energy-saving, Low-cost Solution without battery.The solar panels are processed from tempered glass, which is durable, wear-resistant and resistant to aging.
Easy to Use – Easy to install and use, come with a solar Panel(NO power storage function), and charged by the sun, ,no battery or electricity needed. Please note that this solar power pump kit is driven by the sunshine, it needs the full sunshine to start working (direct sunlight, no shadow or cloud).
Brushless water pump, lower consumption and pumps water easily, can create Relaxing scene, which is perfect for bird bath, fish tank, small pond, garden decoration, water circulation for oxygen.
The solar water fountain pump has a built-in brushless motor that provides a longer service life(About 20,000 hours).
Specifications
Size:110x110mm
Rated Voltage:7V
Rated Current:171MA
Power Consumption:1.2w
Life Span:30~50cm
Flow Rate:180L/H
Outlet:8mm
Pump noise
Lifetime:20,000 hours
Weight:250g
Cable Length:300cm
Heat Resistance:0~45 Celsius
Operation Suggestions
1.Put the pump totally in the water with its nozzle over the water.
2. Do not put solar panel in water and make sure it is under enough sunshine.
3. Make sure no leaf or anything else shade any part of solar panel.
4. Pull out the plug(the head part) first, and make the pump work for seconds to let the air go out of the pump.
5. Then put on the plug to see if it could work well.
Tips of Using the Pump
Don’t make the pump work without water for a long time, or its lifespan will be shortened.
Please put the pump into water and keep the solar panel out of water; otherwise it will get damaged and couldn’t work.
Clean the pump regularly especially the water outlet and spray caps to prevent it from getting stuck.
Change water frequently to keep water clean to avoid any dirt to impede the pump.
Always keep the surface of solar panel clean to well absorb sunlight.
Package included
1 x Solar Pump
4 x Spray Nozzles
1 x Manual in English
Weight | 0.23 kg |
---|
Customers Also Viewed
3Pcs CJMCU-219 INA219 I2C Bi-directional Current / Power Monitor Sensor Module
$24.62Sensor & Detector ModuleAdd to cart3Pcs CJMCU-219 INA219 I2C Bi-directional Current / Power Monitor Sensor ModuleDescriptionCJMCU-219 module is a with I2C interface Bidirectional current / power monitor integrated circuit (IC), and further expand the energy-saving electronic products TI camp. INA219 with the industry’s highest accuracy and smallest size, not only to monitor the voltage drop across a shunt resistor on …
3Pcs CJMCU-219 INA219 I2C Bi-directional Current / Power Monitor Sensor ModuleRead More
GDCPH 16V83F Super Farah Capacitor Automotive Electronic Rectifier 2.7v500F Screw Hole Large Capacity Capacitor
$90.34Electronic Accessories & SuppliesAdd to cartDescriptionThis product can be used in electronic devices such as:RAM, smart three-meter, motor drive, clock circuit, toys, CMOS power failure protection, digital camera, hand-cranked rechargeable flashlight, PDA and other fields as a backup power supply.SpecificationBrand:GDCPHModel:16V83FCapacity:83FRated voltage:16 VSize:231*35*65mmPitch:7mmPackage included1 x capacitor
5pcs PWM DC Motor Governor 5V-16V 10A Speed Switch LED Dimmer Speed Controller
$22.64Motor PWM Speed ControllerAdd to cartParameterMaximum voltage:16VMinimum voltage:5VContinuous current:10AShort circuit maximum current:20A (less than 10 seconds)Speed control mode:PWM stepless speed regulation, can also be used to adjust the lightControl mode:speed control potentiometer (clockwise open, continue to rotate clockwise from 1% to 99%)Duty cycle:0%-99% (0% position is the leftmost state of the potentiometer).When the current is on, 0.002A (there is no …
5pcs PWM DC Motor Governor 5V-16V 10A Speed Switch LED Dimmer Speed ControllerRead More
3pcs 7W 9W 12W 15W LED Non Isolated Modulation Light External Driver Power Supply AC90-265V Constant Current Thyristor Dimming Module
$17.33Driver ModuleAdd to cartSpecificationsInput voltage:AC90-265VOutput voltage:DC21-48VOutput current:300mA(adjustable)Product size:68*34*22mmWorking temperature:Ta:50 TC:75Efficiency:≥80%Power factor:0.6Product application:spotlight PAR light / bulb light / candle light / etc.Package Included3 x 7W 9W 12W 15W LED Non Isolated Modulation Light External Driver
5Set Mini Emergency Hand-cranked Dynamotor Charger Portable Hand-cranked Generator 3V 5V for Diy Electronic Production with Clip Lines
$37.08Electronic Accessories & SuppliesAdd to cartDescriptionUnderstand the gear’s speed-increasing transmission conversion and the principle of electric energy generation, and cultivate the manual and brain skills, which is very suitable for manual classes in schools or for adults and children to play together!When shaking slowly for one second or more, the generating voltage can easily reach 3V, and it is easy …
APPJ Single End 6J1 + FU32 Tube Amplifier Board Class A Power AMP Hifi Vintage Audio Assembled Board
$182.24Amplifier BoardAdd to cartNew update:The appearance is updated from March 6, 2021.SpecificationsAssembled, solder freeDriver tubes:6J1x2PCSPower tubes:FU32x2PCSPower output:3W+3W @8ohmFrequency response:30-40KHz(+-1dB)Input sensitivity:550mVSignal-to noise-ratio:-80dB/3WInput power:85-264VACPower consumption:40WInput impedance:10K ohmOutput impedance:16ohm,8ohm,6ohm,4ohmPackage dimension:12*21*17cmPackage weigth:1.5KGNoteThe self-made shell must be opened with sufficient heat dissipation holes, preferably 50% of the shell area, at least 30%, otherwise it will affect the service life.Package Included1 x End 6J1 …
Caturda C2707 4Channel I2C interface Current Voltage Power Monitoring Module for Raspberry Pi
$39.03Raspberry Pi & Orange PiAdd to cartSpecificationsCurrent and power monitor for Raspberry Pi, 4 channels, can monitor the current, voltage, power and voltage across the sampling resistor through the I2C/SMBus interfaceFeaturesRaspberry Pi 40pin GPIO Interface, fit for Raspberry Pi all SeriesSupport 4 Channel I2C/SMBus CommunicationOnboard 1ohm 1% Resistance.Monitor 3.2A Bidirectional current12bit ADC Measuring 0-26V VoltageWorking Voltage:3.3V/5VInterface:I2C/SMBusResistance:1ohm 1%Voltage Range:0-26VCurrent:÷3.2ASize:65mmx30mmPackage Included1* Monitoring Module
Reviews
There are no reviews yet.