TKS-M8 4-40V DC Motor Speed forward and Reverse Controller with Shell 20A Relay P0 Optocoupler Isolation Anti-jamming
$17.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Working voltage:4-40V DC
Module power consumption:0.6W (static 0.1W)
Signal input:active low. The input is the negative of the optocoupler. A signal is considered to be present when the voltage is below 2V.
Response speed:K1 K2 is 20mS, SW1 SW2 is 50mS.
Output current 20A
PCB size:83*46*20mm
Shell size:87*54*59mm
User Manual
K1:Forward signal
K2:Reverse signal
SW1:Forward limit
SW2:Reverse limit
1. Press K1 and the motor will start to rotate immediately until SW1 closes.
2. Press K2 and the motor immediately starts to reverse until SW2 closes and stops.
3. When K2 is pressed during forward rotation, it will switch to reverse immediately. When K1 is pressed during reverse rotation, it will switch to forward rotation immediately.
1. What mode is P0
P0 is self-locking mode. For example, if the external forward switch (K1) is pressed, the motor will immediately rotate forward. At this time, the instant switch will be released and the motor will continue to rotate forward. It will not stop until the reverse signal (K2) or the forward stop signal (SW1) is encountered.
2. What are the requirements for the signal, can I connect the sensor
The signal is active low and can be a three-wire sensor (NPN-NO type). K1 K2 SW1 SW2 is still the specification.
3. What is the input and output voltage
The input voltage range of the TKS-M8 is 4V~40V, but to ensure reliable operation, it is recommended to use it within the range of 6V-36V. This module is wide voltage. The output motor is the same as the input voltage.
4. What is the limit signal
The limit signal can also be referred to as a stop signal. The limit signal is triggered and level enabled. For example, if a short limit signal is encountered during forward rotation, it will stop, even if the limit signal disappears, it will stop. You must re-transmit the signal once again to get forward again.
5. Can drive a large motor
The maximum current of the TKS-M8 at 12V is 20A, and the maximum current is 10A when the voltage is 24V. The maximum drive motor power is generally not more than 80W. It is recommended that the motor’s stall motor be the standard.
7. Can I achieve automatic forward and reverse
The TKS-M8 does not have a timing function, so strictly speaking, it cannot automatically reciprocate. However, with the start switch, the start switch (A), and the end switch (B), it is possible to achieve infinite reciprocating operation between the two points A and B. Connection method:The start switch and the start switch are connected to K1, the end switch is connected to K2, and SW1 SW2 is not connected. Note that all switches are normally open.
Package Included
1 x TKS-M8 P0 4-40V DC Motor Forward and Reverse Controller with Shell
Weight | 0.081 kg |
---|
Customers Also Viewed
M5Stack Ultra-Wideband UWB UnM5Stack Ultra-Wideband UWB Unit indoor Positioning Module DW1000 Low Power Consumption for indoor Wireless Tracking Rangeit indoor Positioning Module DW1000 Low Power Consumption for indoor Wireless Tracking Range
$87.06Test & Measuring ModuleAdd to cartDescriptionUWB is a Unit which integrates the UWB(Ultra Wide Band) communication protocol which uses nanosecond pulses to locate objects and define position and orientation. The design uses the Ai-ThinkerBU01 Transceiver module which is based on Decawave’s DW1000 design. The internal STM32 chip with its integrated ranging algorithm,is capable of 10cm positioning accuracy and also supports …
3 in 1 LED Ultrasonic Anti Barking Pet Dog Train Repeller Control Trainer Device
$36.44Solar CollectorsAdd to cartLED Ultrasonic Dog Repeller Handheld Dog Trainer Device 3 in 1 Anti-barking Stop Bark Dog Deterrent Training ToolsFeaturesUltrasonic design-Adopts ultrasonic technology, make the dogs be quite and can effectively train your dogs to be obedient and stop some unwanted behaviors, protect you from being attacked by unfriend dogs. Multi-function deviceThe dog repeller have 3 functions, …
3 in 1 LED Ultrasonic Anti Barking Pet Dog Train Repeller Control Trainer DeviceRead More
3pcs DC 3.7-7.4V 4A 800-1000KV High Voltage Pulse Generator Super Arc Pulse Ignition Coil Module
$32.59Electronic Accessories & SuppliesAdd to cartDescriptionInput parameters:3.7-7.4V/4A input, cable length:about 10 cm (red + green -)Output parameter:800-1000KV / 0.5A, cabl length:about 16 cmHigh voltage polarization discharge distance:1.5-2cm (don’t exceed)Size:3.4 x 2.3 x 1.7cmAbout input power:can use 3.7V lithium battery input (such as 18650 battery), 4V or 6V lead acid battery and so on. The input voltage current affects the output …
Semiconductor Chilling Plate Cooling fan Kit TEC1-12706 thermoelectric Peltier Cooler Refrigeration Cooling System
$37.17Module KitsAdd to cartDescriptionAdopt TEC1-12706 semiconductor chilling plate, good quality for use.Complete sealed structure, isolating the moisture in the air.Higher reliability than others.Include TEC1-12706 semiconductor cooler and other accessories, easy to install.Great DIY kit for electronic enthusiasts in semiconductor cooling applications.FeatureSemiconductor Chilling Plate:TEC1-12706Size:40 * 40 * 3.75mmInternal Resistance:2.1~2.4Max. Temperature Difference:67C AboveRated Voltage:12V(Vmax. 15V, Starting Current 5.8A)Working Current:Imax.=4~4.6A(Rated 12V)Refrigeration …
Universal 40-Pin ZIF DIP IC Test Board Socket ZIF IC Socket for DIP IC MCU
$16.19SwitchesAdd to cartFeatureThis is a universal ZIF IC test socket.Great pin contact with a leverIt’s suitable for IC with 40 pinsEasy to remove and to program ICsSpecificationColor:greenMounting Type:Through holePitch:Approx. 0.1inchinch inches (2.54mm)Pin Number:40Type:DIP, ZIFSize(L x W x H):Approx. 65mm x 2.2mm x 1.1mm(L x W x H not include the pins and lever)Package Included1 x IC socket
AUDEW Premium Tire Pressure Gauge 0-100 PSI Heavy Duty & Accurate Air Pressure Tire Gauge for Car SUV Truck Motorcycle Bicycle
$28.34Switch AccessoriesAdd to cartSPECIFICATION-Applicable type:car, truck, motorcycle, bike, etc-Operating Temp:- 20 ℃ ~ + 40 ℃-Range:0-100 psi-Unit of measurement:PSI, BAR-Resolution:0.05 kg/cm-Accuracy:+/-1%+0.5psi(relative humidity Temperature 25 ℃)FEATURES1.More than a tire pressure gauge, also can deflate overinflated tires with a built-in air bleeder valve.2.High accuracy and easy to read with 2 units of measurement.3.Made with premium heavy duty matel materials, sturdy …
Reviews
There are no reviews yet.