TKS-M8 4-40V DC Motor Speed forward and Reverse Controller with Shell 20A Relay P0 Optocoupler Isolation Anti-jamming
$17.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Working voltage:4-40V DC
Module power consumption:0.6W (static 0.1W)
Signal input:active low. The input is the negative of the optocoupler. A signal is considered to be present when the voltage is below 2V.
Response speed:K1 K2 is 20mS, SW1 SW2 is 50mS.
Output current 20A
PCB size:83*46*20mm
Shell size:87*54*59mm
User Manual
K1:Forward signal
K2:Reverse signal
SW1:Forward limit
SW2:Reverse limit
1. Press K1 and the motor will start to rotate immediately until SW1 closes.
2. Press K2 and the motor immediately starts to reverse until SW2 closes and stops.
3. When K2 is pressed during forward rotation, it will switch to reverse immediately. When K1 is pressed during reverse rotation, it will switch to forward rotation immediately.
1. What mode is P0
P0 is self-locking mode. For example, if the external forward switch (K1) is pressed, the motor will immediately rotate forward. At this time, the instant switch will be released and the motor will continue to rotate forward. It will not stop until the reverse signal (K2) or the forward stop signal (SW1) is encountered.
2. What are the requirements for the signal, can I connect the sensor
The signal is active low and can be a three-wire sensor (NPN-NO type). K1 K2 SW1 SW2 is still the specification.
3. What is the input and output voltage
The input voltage range of the TKS-M8 is 4V~40V, but to ensure reliable operation, it is recommended to use it within the range of 6V-36V. This module is wide voltage. The output motor is the same as the input voltage.
4. What is the limit signal
The limit signal can also be referred to as a stop signal. The limit signal is triggered and level enabled. For example, if a short limit signal is encountered during forward rotation, it will stop, even if the limit signal disappears, it will stop. You must re-transmit the signal once again to get forward again.
5. Can drive a large motor
The maximum current of the TKS-M8 at 12V is 20A, and the maximum current is 10A when the voltage is 24V. The maximum drive motor power is generally not more than 80W. It is recommended that the motor’s stall motor be the standard.
7. Can I achieve automatic forward and reverse
The TKS-M8 does not have a timing function, so strictly speaking, it cannot automatically reciprocate. However, with the start switch, the start switch (A), and the end switch (B), it is possible to achieve infinite reciprocating operation between the two points A and B. Connection method:The start switch and the start switch are connected to K1, the end switch is connected to K2, and SW1 SW2 is not connected. Note that all switches are normally open.
Package Included
1 x TKS-M8 P0 4-40V DC Motor Forward and Reverse Controller with Shell
Weight | 0.081 kg |
---|
Customers Also Viewed
3 x 100pcs RM065 Horizontal Trimpot Potentiometer Assortment Kit with Storage Box
$33.28Electronic Accessories & SuppliesAdd to cartSpecificationsModel Number:RM065Operating Temperature:-5 °C to +70 °CTechnology:Carbon FilmType:Trimming PotentiometerRated Power:0.1WResistance Tolerance:±20%Max. Operating Voltage:50VResistance:100 ohm-1M ohm (Variable Resistor)Package included3 x 100pcs 10 Values RM065 Horizontal Trimpot Potentiometer Assortment Kit
ICE-Tower CPU Cooling Fan V2.0 Super Heat Dissipation Different Colors LEDs for Raspberry Pi 3B+/4B
$46.37Raspberry Pi & Orange PiAdd to cartDescriptions1. According to Moore’s law, the design of high-speed and high-density printed circuit board (PCB) is becoming more and more complex.2. Higher processing performance will generate more heat. 3. This super ICE Tower CPU Cooling Fan for Raspberry Pi is burned for solving heat dissipation problem! 4. Tower structure, 5mm copper tube, multi-layer heat sinks, …
20pcs WITRN-CC001 TYPE-C Male to Female Connector TYPE-C Adapter Board Test Fixture Module
$201.72Converter BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.FeaturesAll interfaces of TYPE-C adapter board are led out, all interfaces are independent, which is convenient for TYPE-C development and debugging.Package Included20 x WITRN-CC001 TYPE-C Adapter Board
3pcs M5Stack SG90 Servo 9G SERVO Plastic Teeth Work with 8Servos HAT and PuppyC
$34.70Other Module BoardAdd to cartDescriptionSG90 servo is a M5Stack custom 9g servo.The angle of rotation is 0°~180°,it can be used with 8Servos HAT and PuppyC.This small servo is very easy to use for beginners. You don’t have to use a dedicated drive board with feedback control,Any common servo driver and microcontroller can easily turn it up.Compared to driving a …
3pcs M5Stack SG90 Servo 9G SERVO Plastic Teeth Work with 8Servos HAT and PuppyCRead More
Wireless Electric 360 Spin Cleaning Brush Floor Kitchen Household Brush +5 Heads
$87.06Switch AccessoriesAdd to cartFeatures1. Perfect Multiple Cleaning Tasks — Automatic cleaning scrubber can be used indoor and outdoor, it’s great for curves, tile, sink bowls, toilets, bathtub, door slots, shower windows, it also cleans car tires and mags well.2. Harsh and Abrasive Cleaners — Our flexible bristles mold into cracks and crevices, corners, and shower tracks for a …
Wireless Electric 360 Spin Cleaning Brush Floor Kitchen Household Brush +5 HeadsRead More
Reviews
There are no reviews yet.