TKS-M8 4-40V DC Motor Speed forward and Reverse Controller with Shell 20A Relay P0 Optocoupler Isolation Anti-jamming
$17.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Working voltage:4-40V DC
Module power consumption:0.6W (static 0.1W)
Signal input:active low. The input is the negative of the optocoupler. A signal is considered to be present when the voltage is below 2V.
Response speed:K1 K2 is 20mS, SW1 SW2 is 50mS.
Output current 20A
PCB size:83*46*20mm
Shell size:87*54*59mm
User Manual
K1:Forward signal
K2:Reverse signal
SW1:Forward limit
SW2:Reverse limit
1. Press K1 and the motor will start to rotate immediately until SW1 closes.
2. Press K2 and the motor immediately starts to reverse until SW2 closes and stops.
3. When K2 is pressed during forward rotation, it will switch to reverse immediately. When K1 is pressed during reverse rotation, it will switch to forward rotation immediately.
1. What mode is P0
P0 is self-locking mode. For example, if the external forward switch (K1) is pressed, the motor will immediately rotate forward. At this time, the instant switch will be released and the motor will continue to rotate forward. It will not stop until the reverse signal (K2) or the forward stop signal (SW1) is encountered.
2. What are the requirements for the signal, can I connect the sensor
The signal is active low and can be a three-wire sensor (NPN-NO type). K1 K2 SW1 SW2 is still the specification.
3. What is the input and output voltage
The input voltage range of the TKS-M8 is 4V~40V, but to ensure reliable operation, it is recommended to use it within the range of 6V-36V. This module is wide voltage. The output motor is the same as the input voltage.
4. What is the limit signal
The limit signal can also be referred to as a stop signal. The limit signal is triggered and level enabled. For example, if a short limit signal is encountered during forward rotation, it will stop, even if the limit signal disappears, it will stop. You must re-transmit the signal once again to get forward again.
5. Can drive a large motor
The maximum current of the TKS-M8 at 12V is 20A, and the maximum current is 10A when the voltage is 24V. The maximum drive motor power is generally not more than 80W. It is recommended that the motor’s stall motor be the standard.
7. Can I achieve automatic forward and reverse
The TKS-M8 does not have a timing function, so strictly speaking, it cannot automatically reciprocate. However, with the start switch, the start switch (A), and the end switch (B), it is possible to achieve infinite reciprocating operation between the two points A and B. Connection method:The start switch and the start switch are connected to K1, the end switch is connected to K2, and SW1 SW2 is not connected. Note that all switches are normally open.
Package Included
1 x TKS-M8 P0 4-40V DC Motor Forward and Reverse Controller with Shell
Weight | 0.081 kg |
---|
Customers Also Viewed
7L 2 Hole Plastic Fuel Oil Gasoline Tank Air Heater Diesel Car Caravan Motorhome
$56.69Solar CollectorsAdd to cartFeature1. Made of thick and durable plastic.2. 7L large capacity, suitable for for cars / truck air diesel parking heater.3. Fuel level can be noticed by the plastic box.4. Easy to use.Specifications1. Name:7L Fuel Oil Gasoline Tank2. Model:D303633. Color:White & Blue4. Capacity:7L5. Size:approx.39x22x8cm(HxWxD)6. Material:Plastic & MetalPackage Included1 x Fuel Oil Gasoline Tank1 x Screw Kit
3Pcs XKC-Y25-T12V Non-Contact Liquid Level Switch Stick Type Durable Level Sensor Module
$40.82Sensor & Detector ModuleAdd to cartParameterInput voltage:(InVCC) DC 5 ~ 24 VCurrent consumption:5mAOutput voltage(High level):InVCCOutput voltage (Low level):0VOutput current:1 ~ 50mAResponse time:500mSWorking temperature:0 ~ 100 degreeInduction thickness (Sensitivity) Range:0 ~ 20mmCommunication:RS485Humidity:5% to 100%Material:ABSWaterproof:IP67Package included3 x XKC-Y25-T12V Non-Contact Liquid Level Switch
3pcs IB0505LS-1W DC-DC 5V to 5V Isolation Power Supply Module input 4.75-5.25V Output 5V
$17.04Power Supply ModuleAdd to cart>>>Manual:Click here to openOverviewThe IB_LD-1W & IB_LS-1W series are specifically designed for power applications in distributed power systems on the board that require isolation from the input supply. This product is suitable for1) The input power supply voltage changes ≤ ± 5%;2) The isolation voltage between input and output is required to be ≤1000VDC;3) High …
3pcs IB0505LS-1W DC-DC 5V to 5V Isolation Power Supply Module input 4.75-5.25V Output 5VRead More
20pcs DC-DC 12V 3A Power Supply Module Buck Regulator Module 24V 18V To 12V Fixed Output Step Down
$43.40Power Supply ModuleAdd to cartSpecificationsInput voltage:14 – 26VOutput voltage:12VOutput current:3A (Max), the current should be controlled within 0.8A for working long hoursConversion efficiency:96% (Max)Output rippleOperating temperature:-40→ – 85→Dimension:22.3 x 17 x 4.2mm (L x W x H)Package included20 x DC-DC 12V 3A Power Supply Module
5Pcs 3590S-2-103L 10K Ohm BOURNS Rotary Wirewound Precision Potentiometer Pot 10 Turn
$21.55Electronic Accessories & SuppliesAdd to cart5Pcs 3590S-2-103L 10K Ohm BOURNS Rotary Wirewound Precision Potentiometer Pot 10 TurnDescription1. Color:As Pictures2. Resistance:10k ohm3. Resistance Tolerance:±5%.4. Power:2W5. Working Temperature:1→±125→6. Size:L x Dia / 40 x 20mm / 1.57 x 0.78inch7. Diameter of Shank:5mm/0.19inch8. Life Hour:1000 Hours9. Rotating Life:1,000,000 timesPackage include5 x Rotary Wirewound Precision Potentiometers
Transparent Acrylic Raspberry Pi 4B Case Box Support Cooling Fan instal
$9.18Raspberry Pi & Orange PiAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Installation steps1. Press and hold the corner of the acrylic on the left, and talk about installing the acrylic on the left to the acrylic on the back.2. Attach the acrylic film …
Transparent Acrylic Raspberry Pi 4B Case Box Support Cooling Fan instalRead More
Solar Power inverter 6000W Peak DC 12V To AC 110V Modified Sine Wave Converter
$166.04InvertersAdd to cartFeatures– The inverter can convert DC12V to AC 110V.– Overload, over temperature, short circuit, low voltage, overvoltage protection.– Stable and precise output voltage.– Built-in cooling fan with low noise.– Comes with a car charger and a pair of alligator clip, convenient to use.– Perfect for TV, DVD player and other home appliances.SpecificationsColour BlackContinuous Output:3000 W …
Solar Power inverter 6000W Peak DC 12V To AC 110V Modified Sine Wave ConverterRead More
23*47CM Waterproof 80 LED Solar Street Light 120 Degree with Remote Control
$139.71Solar PanelAdd to cartFeatures– 80 LEDs High-brightness 3030 LED lamp beads, energy saving, even light, longer lasting.– Polycrystalline Solar Panel convert solar energy into electricity, more environmentally friendly.– ABS one-piece housing, high hardness, sealed and waterproof– Easy installation, maintenance-free dependable operation without the need for wiring or trench. Rustproof, waterproof aluminum heavy duty casing. – Please turn on …
23*47CM Waterproof 80 LED Solar Street Light 120 Degree with Remote ControlRead More
Reviews
There are no reviews yet.