TKS-M8 4-40V DC Motor Speed forward and Reverse Controller with Shell 20A Relay P0 Optocoupler Isolation Anti-jamming
$17.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Working voltage:4-40V DC
Module power consumption:0.6W (static 0.1W)
Signal input:active low. The input is the negative of the optocoupler. A signal is considered to be present when the voltage is below 2V.
Response speed:K1 K2 is 20mS, SW1 SW2 is 50mS.
Output current 20A
PCB size:83*46*20mm
Shell size:87*54*59mm
User Manual
K1:Forward signal
K2:Reverse signal
SW1:Forward limit
SW2:Reverse limit
1. Press K1 and the motor will start to rotate immediately until SW1 closes.
2. Press K2 and the motor immediately starts to reverse until SW2 closes and stops.
3. When K2 is pressed during forward rotation, it will switch to reverse immediately. When K1 is pressed during reverse rotation, it will switch to forward rotation immediately.
1. What mode is P0
P0 is self-locking mode. For example, if the external forward switch (K1) is pressed, the motor will immediately rotate forward. At this time, the instant switch will be released and the motor will continue to rotate forward. It will not stop until the reverse signal (K2) or the forward stop signal (SW1) is encountered.
2. What are the requirements for the signal, can I connect the sensor
The signal is active low and can be a three-wire sensor (NPN-NO type). K1 K2 SW1 SW2 is still the specification.
3. What is the input and output voltage
The input voltage range of the TKS-M8 is 4V~40V, but to ensure reliable operation, it is recommended to use it within the range of 6V-36V. This module is wide voltage. The output motor is the same as the input voltage.
4. What is the limit signal
The limit signal can also be referred to as a stop signal. The limit signal is triggered and level enabled. For example, if a short limit signal is encountered during forward rotation, it will stop, even if the limit signal disappears, it will stop. You must re-transmit the signal once again to get forward again.
5. Can drive a large motor
The maximum current of the TKS-M8 at 12V is 20A, and the maximum current is 10A when the voltage is 24V. The maximum drive motor power is generally not more than 80W. It is recommended that the motor’s stall motor be the standard.
7. Can I achieve automatic forward and reverse
The TKS-M8 does not have a timing function, so strictly speaking, it cannot automatically reciprocate. However, with the start switch, the start switch (A), and the end switch (B), it is possible to achieve infinite reciprocating operation between the two points A and B. Connection method:The start switch and the start switch are connected to K1, the end switch is connected to K2, and SW1 SW2 is not connected. Note that all switches are normally open.
Package Included
1 x TKS-M8 P0 4-40V DC Motor Forward and Reverse Controller with Shell
Weight | 0.081 kg |
---|
Customers Also Viewed
3Pcs RobotDyn RTC DS1307 Real Time Clock Battery Shield with Pin Headers Set
$18.67Expansion Board & ShieldAdd to cartPINOUT:http://img.staticbg.com/file/products/20171226001032PINOUT-RTCDS1307.pdfSchematic:http://img.staticbg.com/file/products/20171226001140Schematic-RTCDS1307.pdfFeatureType:Logic ICsPackage includes3 x RTC DS1307 (real time clock) + battery3 x Wemos D1 mini shield6 x Male Pin Header 8pins6 x Female Pin Header -BLACK 8pins6 x Stackable Header – BLACK 8pins
110V Electric Pet Heating Mat Winter Heated Blanket 2 Speeds Waterproof Cat Dog Heater Pads Bed Bite Resistant
$40.49Laboratory Heating EquipmentsAdd to cartSpecificationsType:CushionRated voltage:110V 50HzRated power:20WPlug:US Plug(We will provide adapter according to delivery country)Material:Polyester + cottonSize:45cmx45cm/17.7inchx17.7inchFeature-Soft cotton texture and vivid prints attract pets’ attention.-Two-speed temperature adjustment (high temperature 50 °C,low temperature 30 °C),can be adjust the temperature level.-The heating rate is fast, warm and comfortable,overheat protection.-Scratch and bite resistant,not easily damaged,thick and durable.-Keep warmer in winter,safe and …
Geekcreit UNO+WiFi R3 ATmega328P+ESP8266 32Mb Memory USB-TTL CH340G Module
$19.67Motherboard & Development BoardAdd to cartDescriptionFull integration on one board:Uno R3 ATmega 328 and WiFi ESP8266 with memory 32Mb (MegaByte). All of the modules can work together or each separately. And everyone has their own pinout headers.The convenient solution for the development of new projects requiring Uno and WiFi.Via USB you can update sketches and firmvare for ATmega328 and for …
Geekcreit UNO+WiFi R3 ATmega328P+ESP8266 32Mb Memory USB-TTL CH340G ModuleRead More
3pcs CA-255 10-42inch LED TV Constant Current Board Universal inverte LED TV Backlight Driver Board
$16.47Driver ModuleAdd to cartSpecificationInput Vol:10.8-28VOutput Vol:15-88vsize:8.5×4.5CM1.VCC:power supply and voltage positive, circuit voltage (The voltage is usually 12V or 24V)2.ON / OFF, ON, EN, ON_BL etc:switch foot, foot switch signal (The voltage range is between 2.5V-5V)3. PWM, PDIM, VDAJ, BL-PWM et al:brightness adjustable feet (Dimming have two modes, one is in digital mode -PWM, one is analog dimming -DC4.The …
30pcs A4988 Driver Module Stepper Motor Driver Board with Heatsink
$54.70Motor PWM Speed ControllerAdd to cartFeature1. It is suitable for driving stepper motors of 8V~35V 2A or less2. Only simple step and direction control interface3. Five different stepping modes:full, half, 1/4, 1/8 and 1/164. The adjustable potentiometer can adjust the maximum current output to obtain a higher step rate5. Automatic current decay mode detection/selection6. Overheat shutdown circuit, under-voltage lockout, cross-current …
30pcs A4988 Driver Module Stepper Motor Driver Board with HeatsinkRead More
10pcs 801S Vibration Shock Sensor Control Module Sensitivity Adjustable Board
$79.70Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Features1. having a signal output instruction;2. with a TTL level signal, and the analog output signal;3. the output valid signal is high, the light goes out;4. the sensitivity is adjustable (fine-tuning);5. wide …
10pcs 801S Vibration Shock Sensor Control Module Sensitivity Adjustable BoardRead More
5pcs W3231 incubator Temperature Controller thermometer Cool/Heat Digital Dual Display with NTC Sensor DC12V
$41.22Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionTemperature Control:-55C~120C/-67F~ 248FTemperature Control Accuracy:0.1 C / 0.1 FDisplay Color:Red + BlueWorking Power Supply:DC12VTemperature Sensor:1M NTC 10K Product Size:79.2mm≠41.9mm≠26.3mmHole Size:72.1mm≠39.2mmOperation and Display PanelWarning codeCodeReason for errorSolutionHHHTemperature exceeds alarm temperatureThe temperature drops below …
CO2 System Pro Tube Air Valve Guage Bottle Cap Kit for DIY Aquarium Planted Tank
$68.84ConnectorsAdd to cartTechnical SpecificationsColor:WhiteMaterial:ABS and MetalTube Inner Size:4mmFeatures and Benefits Easy to set up CO2 system is designed for low cost planted tank use. 2 air-pipe locks on the bottle cap, prevent the air-pipe get loose ABS bottle caps, good pressure resistance, NO deformation Specialized pressure gauge, build-in automatic safe valve,Keeps pressure in the safe level, never …
CO2 System Pro Tube Air Valve Guage Bottle Cap Kit for DIY Aquarium Planted TankRead More
Reviews
There are no reviews yet.