48V 500W Wind Charge Controller Wind Turbine Generator Controller Wind Generator Controller
$97.19
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Package list
1x Controller
Specifications
Rated battery voltage:48V
Wind generator braking voltage:60V
Wind generator recover voltage:54V
Protection class:IP67
Precautions
1. Verify that the wind turbine output voltage matches the rated voltage of the battery.
2. Wire in the following order, first connect the positive and negative terminals of the battery, and then connect the three-phase voltage output of the fan.
3. Please carefully connect the battery and the wind turbine to the controller according to the instructions. Connecting the reverse polarity or the wrong position will cause the system to work abnormally and may even cause damage to the system components.
4. Although the controller has taken protective measures against various possible accidents, it is strongly recommended that users strictly abide by the operating procedures to prevent damage to the battery and controller.
Wiring
1. Connect the “+ Inch and “- Inch of the battery to the positive and negative terminals of the battery of the controller.
2. Connect the three-phase output voltage of the wind turbine to the three-phase voltage input terminal of the controller fan.
3. When manual brake is required, short the red thin wire to the positive battery, that is, complete the manual brake function. To cancel this function, just disconnect the thin red wire.
Indicator status
– When the controller green power (BATTERY) indicator is on, it indicates that the battery is connected properly.
– When the controller’s green fan access (WIND) indicator flashes, it indicates that the wind turbine is connected. The speed of the flashing reflects the speed of the fan.
– When the controller red (BRAKE) indicator is on, the battery is fully charged, the wind turbine is automatically braked, or the brake is automatically activated due to overcurrent protection.
Weight | 0.445 kg |
---|
Customers Also Viewed
QCC3003 bluetooth 5.0 with independent DAC Decoding Receiver with Analog input and Output
$52.47Amplifier BoardAdd to cartFeatureThe core uses QCC3003 chip, supports A2DP, AVRCP, HFP, AAC, I2S, etc., and uses 16M SPI FLASH memory chip.PCB size:64X63MMProduct weight:50 gramsVoltage range:AC 6-12V, or DC 7-15VPackage includes1 x DAC Decoding Receiver
500pcs CBB22 Capacitor 100V 104J
$32.79Module ComponentsAdd to cartFeaturesSmall size, good self-healing.High frequency loss, low temperature rise. High impact strength.It has good withstand voltage performance under high frequency AC condition.SpecificationsMedium:polypropylene membrane.Electrode:metal vacuum evaporation layer (Al / Zn Al Composite thickened type).Package:flame retardant epoxy resin, conforming to UL94 V-0.Pins:copper clad steel tinned wire (CP wire), PVC wire or tinned copper wire.Package included500 x Capacitor
180Pcs 10 Values Tactile Push Button Switch Mini Momentary Tact Assortment Kit DIY
$13.11Electronic Accessories & SuppliesAdd to cartFeature∵ High precision mechanism design offers perfect operation and long service life.∵ Package includes 10 values tact push button switch,total 180PCS.∵ 10 values:6*6*4.3,6*6*5,6*6*6,6*6*7,6*6*8,6*6*9.5,6*6*11,6*6*12,6*6*13,6*6*14mm.∵ Great tool for television, audio equipment ,computer, interphone, remote control and other many filed.Package included20PCS 6*6*4.320PCS 6*6*520PCS 6*6*620PCS 6*6*720PCS 6*6*820PCS 6*6*9.520PCS 6*6*1115PCS 6*6*1215PCS 6*6*1310PCS 6*6*141PCS plastic box
AC 12V 1A 6J1 Value Preamp Tube Preamp Amplifier Board PreAmplifier Headphone DIY Kits
$26.23Amplifier BoardAdd to cartFeatures1. Type:6j1 tube2. Power input:AC 12V 1A, 5.5*2.5 plug3. Channle:2.0 / stereo 4. Potentiometer Role:Volume adjustment + Power Switch5. Size:77 x 75 x 52mmNote:This is DIY Kits, and you need to assembled it by yourself. (No instructions supply)SpecificationFE-6J1-2 fever tube pre-amp board is the circuit schematic design imitation crew Music fax X-10D,to be rational optimization,more …
AC 12V 1A 6J1 Value Preamp Tube Preamp Amplifier Board PreAmplifier Headphone DIY KitsRead More
Enclosure Protective Transparent Assembly Case for Raspberry Pi 3 Model B+
$7.09Raspberry Pi & Orange PiAdd to cartFeatures1.The whole enclosure is made of ABS material. 2.The case is a two-piece injection-molded ABS enclosure with 4 screws and 4 non-slip foot pads, easy to install.3.Protective case designed specifically for Raspberry Pi 3 Model B/B+4.The case surface is smooth and exquisite, with perfect design of the buckle card slot.5.The bottom cover is designed with …
Enclosure Protective Transparent Assembly Case for Raspberry Pi 3 Model B+Read More
3300Pcs 33 Values Each 100 Resistor 0603 SMD Resistor Kit Assorted Kit 1Ohm-1M Ohm 1%
$32.47Electronic Accessories & SuppliesAdd to cartDescription33 kinds of 0603 SMD resistance values1R(1R00) 3R3(3R30) 5R1(5R10) 10R(10R0) 22R(22R0) 47R(47R0)62R(62R0) 82R(82R0) 100R(1000) 150R(1500) 330R(3300)470R(4700) 680R (6800) 1K(1001) 1K8(1801) 3K(3001) 4K7(4701)5K1(5101) 7K5(7501) 10K(1002) 12K(1202) 18K(1802)33K (3302) 43K (4302) 51K (5102) 75K (7502) 100K (1003)200K (2003) 300K (3003) 390K (3903) 470K (4703) 680K (6803) 1M (1004)Package included1 x 3300Pcs 33 Values Each 100 Resistor 0603 …
3300Pcs 33 Values Each 100 Resistor 0603 SMD Resistor Kit Assorted Kit 1Ohm-1M Ohm 1%Read More
Keyes Brick MQ-3 Alcohol Sensor Module with Pin Header Digital Signal and Analog Signal
$10.65Sensor & Detector ModuleAdd to cartDescriptionThis sensor is fully compatible with ARDUI NO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. The gas-sensitive material it uses is tin dioxide (Sn02) with low conductivity in clean air. When there is alcohol vapor in the environment where the sensor is located, the conductivity of the sensor …
Keyes Brick MQ-3 Alcohol Sensor Module with Pin Header Digital Signal and Analog SignalRead More
Reviews
There are no reviews yet.