48V 500W Wind Charge Controller Wind Turbine Generator Controller Wind Generator Controller
$97.19
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Package list
1x Controller
Specifications
Rated battery voltage:48V
Wind generator braking voltage:60V
Wind generator recover voltage:54V
Protection class:IP67
Precautions
1. Verify that the wind turbine output voltage matches the rated voltage of the battery.
2. Wire in the following order, first connect the positive and negative terminals of the battery, and then connect the three-phase voltage output of the fan.
3. Please carefully connect the battery and the wind turbine to the controller according to the instructions. Connecting the reverse polarity or the wrong position will cause the system to work abnormally and may even cause damage to the system components.
4. Although the controller has taken protective measures against various possible accidents, it is strongly recommended that users strictly abide by the operating procedures to prevent damage to the battery and controller.
Wiring
1. Connect the “+ Inch and “- Inch of the battery to the positive and negative terminals of the battery of the controller.
2. Connect the three-phase output voltage of the wind turbine to the three-phase voltage input terminal of the controller fan.
3. When manual brake is required, short the red thin wire to the positive battery, that is, complete the manual brake function. To cancel this function, just disconnect the thin red wire.
Indicator status
– When the controller green power (BATTERY) indicator is on, it indicates that the battery is connected properly.
– When the controller’s green fan access (WIND) indicator flashes, it indicates that the wind turbine is connected. The speed of the flashing reflects the speed of the fan.
– When the controller red (BRAKE) indicator is on, the battery is fully charged, the wind turbine is automatically braked, or the brake is automatically activated due to overcurrent protection.
Weight | 0.445 kg |
---|
Customers Also Viewed
10pcs DC 12V 6A 3 String Battery Protection Board Panels Solar Street Lights
$29.51Other Module BoardAdd to cartDescriptionSize:56x45x3mmContinuous working current:Within 6ACharge current:Within 6ABalance charging:YesShort circuit protection:YesFunction:Prevent overcharge, overplay, circuit protectionSuitable assembly:Nominal 3.7V electric core / three stringsPackage Included10 x 12V Battery Protection Board
10Pcs Green LED Power Symbol Momentary Latching Switch LED Light Push Button SPST
$20.86Electronic Accessories & SuppliesAdd to cart10Pcs Green LED Power Symbol Momentary Latching Switch LED Light Push Button SPSTDecriptionLatching type:Push it– on, push it again — offLED color:GreenSize(H*D):1.4 x 1cm / 0.55inch x 0.39inch (approx)Quantity:10 pcsFunction:MomentaryLED light voltage:3.2VSwitch voltage:12VMaximum operating current:20mAWith led light, with power symbol, light touch switchEasy to use and installNote1. Please check the picture and part number carefully …
10Pcs Green LED Power Symbol Momentary Latching Switch LED Light Push Button SPSTRead More
XH-M572 High-power Digital Power Amplifier Board TPA3116D2 Chassis Dedicated to Plug-in 5-28V Output 120W
$12.31Amplifier BoardAdd to cartProduct parametersProduct name:digital power amplifier boardProduct model:XR-M572Chip model:TPA3116Input voltage:DC 8-28V (24V recommended)Output resistance group:4-8┯Appearance size:83*60*25MMProduct weight:65 gramsPackage includes1 x digital power amplifier board
YouLoop Magnetic Antenna Portable Passive Magnetic Loop Antenna for HF and VHF
$39.35Other Module BoardAdd to cartSpecificationHF Response:10kHz to 30 MHzVHF Response:up to 300 MHzMaximum Power:250 mWWeight:230gFeedline Length:6m (SMA male to male)Features-Passive design-No tuning required-Low-loss wide-band BALUN with 0.28 dB loss typ.Package Included-1 x T-shaped BALUN-1 x Phase Inverter-2 x 1m RG402 Coax Loop Cable-1 x 6m RG174 Coax FeedlineNoteThis antenna is not waterproof. If it is used outdoors, please do …
YouLoop Magnetic Antenna Portable Passive Magnetic Loop Antenna for HF and VHFRead More
M5Stack ATOM Matrix PICO ESP32 Development Board Kit IMU Sensor Python
$37.17Motherboard & Development BoardAdd to cartDescriptionATOM Matrix is the most compact development board in the M5Stack development kit series yet with a size of only 24 * 24mm. It provides more GPIO pins and is very suitable for handy and miniature embedded device development. The main control adopts the ESP32-PICO-D4 chip, which comes integrated with Wi-Fi and Bluetooth technologies and …
M5Stack ATOM Matrix PICO ESP32 Development Board Kit IMU Sensor PythonRead More
5Pcs DC-DC Buck Module 6-24V 12V/24V to 5V 3A USB Step Down Power Supply Charger Efficiency 97.5%
$17.46Boost & Buck ModuleAdd to cartFeaturesThe max output current 3A, long time use 2.1A, enough useNew design, 3 solid state ceramic capacitors(MCC), more safe and low rippleSynchronous rectification, High efficiency, 6.5V to 5V 0.7A can up to 97.5%, 12V to 5V 1A can up to 94%Flat copper inductor, improve conversion efficiencyWith output overvoltage protection. There is 1.5A fuse, output 5V …
6V 180L/H Solar Power Floating Fountain Garden Landscape Water Pump 55-75cm Lifting
$36.44Electrical Pump & ValveAdd to cartSpecificationSolar panels:6V/1.4W Voltage:3.7-12 v Maximum flow rate:180L/HLift:55-75cmMaterial:monocrystalline siliconSize of the solar panel:160mmApplication scenario:outdoor, courtyardFeatures– This pump can be connected to a variety of different shapes of nozzles to spray different water types.-Uses high-efficiency solar panels and the new brushless water pump, which has the advantages of fast start-up, high efficiency and strong stability.-Can work as …
6V 180L/H Solar Power Floating Fountain Garden Landscape Water Pump 55-75cm LiftingRead More
Reviews
There are no reviews yet.