7V 160mm LED Colors Solar Fountain 4-in-1 Nozzle 3W Solar Powered Fountain Pump Solar Bird Bath Fountain for Bird Bath Pond
$52.64
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Package Included
8 x Sprinkler head
1 x Sprinkler base
4 x Connector
1 x Instruction
Specification
Solar panel size:156mm
Solar panel voltage power:7V/ 3W
Water pump starting light intensity:lt;10000 lux
UX spray height:30-60 (cm)
Battery capacity:900 (mAh)
Noise:S42 dB
Inner box size:170*165*50mm
Carton size:425*355*350mm
Net weight:0.40kg
Water spraying heigh:30-60cm
Number of lights:6LED
Application scenario:outdoor, courtyard
Features
-Our new upgraded floating solar fountain pump with 6 LED light sources is more attractive and adds more beauty to your swimming pool or garden under sunlight.
– This pump can be connected to a variety of different shapes of nozzles to spray different water types.
-Uses high-efficiency solar panels and the new brushless water pump, which has the advantages of fast start-up, high efficiency and strong stability.
-Can work as usual after rain.
-Run automatically, no battery or electricity, just needs the sunshine, and with convenient installation and simple operation.
-Widely used in garden decoration, bird bath, small pond water circulation oxygenation, rockery fountain and other places.
-Automatic start:The pump cannot work without sunlight. When the pump receives sufficient sunlight, the pump will start within 3 seconds.
Precautions
1 There is no external battery. The height of the water spray depends entirely on the strength of the sun. When the sun is weak, the pump will not work continuously, but will automatically start repeatedly until the sunlight reaches a certain intensity. The pump resumes continuous operation. When using, place the product in unobstructed sunlight. Shadow blocking will affect the normal operation of the pump.
2 The pump must be completely immersed in water and should not be dehydrated for a long time. When the water pump has just been immersed in water, it is recommended that the pump be inserted into a different nozzle after the water is sprayed normally.
3 Please keep the water source clean and clean the water pump regularly to prevent foreign matter from being sucked by the water pump and the pump will not work properly.
Notice
Due to the light and screen setting difference, the item’s color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.
Weight | 0.407 kg |
---|
Customers Also Viewed
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water Heater
$21.87Laboratory Heating EquipmentsAdd to cartDC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterSpecificationsModel:SSG-2Type:Normally ClosedMaterials:Plastic & CopperDimension:83*90*49cmPipe Inside Diameter:1/2 inchNet Weight:(approx.) 190gFeaturesThis is a DC12V solenoid valve usually used for solar water heater.It can work with water from 1 to 100℃ (or some other liquid).Working Voltage Range:Rated Voltage ±10%Working Water Pressure:0.02 to 0.8MpaThe working water pressure would be too low/high to …
DC12V 0.02-0.8MPa Solenoid Valve for Solar Water HeaterRead More
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set Kit
$76.17Terminal BlocksAdd to cartDescription650 Pcs Assorted Ring Insulated Electrical Wire Terminals Crimp Connector Set KitSpecificationQuantity:650PcsMaterial:Copper + PVC+ TinplateInsulated crimp terminals.All are enclosed in plastic case for easy access.The assorted crimp terminals is including50 x Ring M3 Red50 x Ring M4 Red50 x Ring M5 Red50 x Ring M6 Red50 x Ring M8 Red50 x Ring M4 Blue50 x …
650 Pcs Assorted Ring insulated Electrical Wire Terminals Crimp Connector Set KitRead More
3.5 inch Protective Enclosure Case Support Dispaly Screen or Cooling Fan for Raspberry Pi
$9.26Raspberry Pi & Orange PiAdd to cartFeatures– Fully updated for Raspberry Pi 3B+/3B/2B– Can support 3.5 inch screen or cooling fan (notes:can not assemble them at the same time)– Heat sink openings for both CPU and LAN chip– High-gloss finish, surface mountableSpecificationsColor:BlackMaterial:ABSSuitable for Raspberry Pi 3B+/3B/2BWeight:45gSize:9cm*6.2cm*3.4cmPackage Included1x ABS Case4x Non-slip mat4x Screws
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module for
$47.25DIY Electronic KitsAdd to cartDescription1. Use TM1650 (compatible with AIP650) digital tube driver chip, support 8-level brightness adjustment, working voltage 3.3V ~ 5.5V2. IIC interface, only need 2 ordinary IO can drive, do not need to repeat scanning of MCU, saving MCU resources.3. 4 digit 0.56 inch red common negative digital tube with decimal point.4. 0.56 inch with four …
20pcs 0.56 inch Digital Tube DIY Kit TM1650 4-digit LED Digital Tube Display Module forRead More
WEAH-81 Car Heavy Bass Frequency Divider High and Low 2-way 2 Bass Crossover Upgrade Tool
$33.09Amplifier BoardAdd to cartFeatureBrand:WEAHModel:81Power:100WApplicable impedance:4-8ohmFrequency response:100Hz ~ 45HzDimensions:133 x 95 x 44mmApplication environment:Car or home speaker DIYPackage includes1 x Bass Frequency DividerHow to Wire:
5pcs 8-36W intelligent Sensor LED Ceiling Light And Sound Control Power Supply Module Bulb Panel Light Built-in Power Driver
$21.42Power Supply ModuleAdd to cartDescriptionInput Voltage:AC185-265VOutput Current:0.22AOutput Voltage:24-108VEfficiency:90%Working Frequency:50/60HZOutput Power:8-24WSound Control:50-75dBLight control:7-20LuxDiameter:25.8mmFeature1. The combination of sound and light control, when the light is strong, does not work, the light intensity is lower than 12-15LUX, and the sound of the induction 27-36DB starts automatically.2. Delay 40-60S automatically extinguished, easy to install, compatible with ordinary switches, no additional wiring.3. Single trigger, …
Reviews
There are no reviews yet.