32Pcs incubator Box Egg incubator Digital 12V/110V Dual Voltage incubator Poultry Hatcher
$129.59
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Package Included
2 x Water bags
1 x Incubator
1 x Cotton Pad
1 x Sprinkle Bottle
1 x 12V Cable
1 x 110V Cable
Specifications
Materials:PP Plastic
Manchine input voltage:DC 12V±10%
Power Adapter input voltage:AC110V±10% 50HZ
Output voltage:DC 12V±10% 2A
Temperature measurement accuracy:±0.1℃
Environmental humidity:≤85%RH
Environmental temperature:-10℃-38℃
Features
–Fall and high temperature-resistance material
–Transparent case with self-contained egg candler for easier observation.
— Ventilation holes on both sides, increasing the amount of oxygen in the tank, high hatching rate.
— Multi-type egg hatching:eggs, duck eggs, goose eggs, bird eggs, ect.
Operation Steps
1. Power on test.
2. Put one plastic bag into the other plastic, then pour water (preferably around 30 degrees) into
the plastic bag and Lay the plastic bag at the bottom of the box.
3. Put the temperature probe to the surface of the plastic bag with tape (must be placed on the upper surface).
4. Start testing the machine and wait for the temperature to be stable before calibrating the thermometer.
5. The water bottle is filled with water and placed in the machine to keep the water temperature of the kettle
consistent with the temperature of the hatching eggs.
6. Put the hatching eggs after disinfection and put them directly on the plastic bag.
7. Put a small quilt on the hatching eggs and cover the hatching eggs tightly.
8. Spray Water Three days before shelling, spray 2~3 times a day; spray twice each time.
Note:Do not cover airtight things, such as plastic sheets, etc., the original packaging foam cover can not be used when hatching.
Warning
* Be sure to test whether the water bag is leaking, or it may cause a short circuit.
* After putting the hatching eggs on the plastic, put a small quilt, not too loose or too tight, you must
ensure that there is sufficient oxygen in the incubator.
* The default temperature is 37.8 ° C, and the number of eggs can be hatched at the same temperature regardless
of the number of eggs(the incubator can contain 32pcs eggs.).
* Egg hatching time is 19-23 days; different egg types have different hatching time.
* During the hatching period, in addition to the need to turn the eggs, you need to spray water three days before
the shelling, spray 2-3 times a day, two times each time.
Operation Instruction
Temperature setting
In the normal display state, short press the “SET Inch button, Flashing number on the screen is
the current machine setting temperature, press “+ Inch or “- Inch at this time.
Press the button to adjust to the needed temperature, and then press the “SET Inch button.
The machine will automatically save and exit the setting interface.
Egg candling operation
Press the inchEgg Candlinginch button to release, then the control panel will open the egg candling lamp;
place the hatching eggs in the egg candling hole to observe; after observing,
Press the inchEgg Candlinginch button to turn off egg candling lamp.
Temperature calibration settings
In the normal display state, long press the inchSETinch button until the screen displays PO,
immediately release the hand, pressing the inchSETinch button again, the screen displays 0.0.
And the corresponding inch+inch or inch-inch is adjusted at this time.
For example, if the machine displays temperature is 37.8℃ and the thermometer temperature is 37.0℃,
P0 is adjusted to -0.8℃ by inch-inch.
Quickly restore factory settings
Hold down the inch+inch and inch-inch keys together and do not raise your hand (about 5 seconds).
At this time, the buzzer will beep and the screen will flash once to indicate that
the control board is successful. Restore all factory default data (including previously calibrated temperature).
Note
1.Please allow 1-2cm errors due to manual measurement.
2.Due to the difference between different monitors, the pictures may not reflect the actual color of the item.
Weight | 0.767 kg |
---|
Customers Also Viewed
3Pcs NodeMcu Lua WIFI internet Things Development Board Based ESP8266 CP2102 Wireless Module
$33.62Smart ModuleAdd to cartDescriptionMaterial:Experimental Board + Mixed AlloyColor:BlackChip Module:CP2102Working Temperature:-40 → ~ +125 →Power Input:4.5V ~ 9V (10VMAX), USB-poweredDrive Type:Dual high-power H-bridge driverCurrent:continuous transmission ≈70mA (200mA MAX)StandbySize:(L)X(W)4.8X2.5cm/1.89inchX0.98inch(appr.)FeaturesA great set of tools to develop ESP8266.ESP8266 has IO Pin.ESP8266 full IO mouth leads directly download without resetting.Open-source, interactive, programmable, low cost, simple, smart, WI-FI enabled.Greatly speed up your IOT application …
3pcs 500W Thyristor Electronic Regulator Accessaries Dimming Speed Regulation with Switch Temperature Adjustment Knob Module
$13.41Motor PWM Speed ControllerAdd to cartSpecificationsPCB board size:3.2CM*3.3CMRated power:P=UI; 500W=220V*2.27AModel:500W dimming governor;Rated power:500W;Suitable for dimming speed control of AC motors, lamps, etc. above 100W and below 500W;NoteThis module is connected to the AC voltage of 220V, so be sure to pay attention to safety when debugging, to prevent the occurrence of electric shock accidents, the store is not responsible for …
2 in 1 Folding Digital LCD Angle Finder Ruler Stainless Steel Ruler 360 Degree Protractor
$42.51Laboratory Thermostatic DevicesAdd to cartSpecificationsMaterial:Stainless Steel + PlasticSize Range:0-300mmMeasuring Range:0-360°Resolution:0.05°Accuracy:±0.3°Repeatability:0.05°Battery:1 * 3V CR2032 Lithium Battery (Built-in)Features ACCURATE & Fast:Calculating angles quickly and accurately, digital display clearly TWO SCALE DISPLAY:Both measure the angle and length, metric and imperial scale 360° MEASUREMENT RANGE:Stable locking function can lock the measurement at any angle INTELLIGENT & SAVE POWER:Automatically shut down after 6 minutes …
2 in 1 Folding Digital LCD Angle Finder Ruler Stainless Steel Ruler 360 Degree ProtractorRead More
WangDaTao TEA5767 Radio DIY Kit FM Digital Radio Electronic DIY Soldering Kit
$43.73DIY Electronic KitsAdd to cartDescriptionCircuit board size:7.7CMX6.1CM;Shell size:8.4cm*7.6CM*5.5CMWorking voltage:DC 5V (positive inside DC seat)Frequency modulation range:87MHZ-108MHZ;FM button:press the button once to 0.1MHZ, long press the FM button to continuously add and subtract;Weight:265GFunction:digital display frequency function, power off memory function, power saving function;Power-off memory function:After turning off the power, power on again to play the radio station before the power-off.Power …
WangDaTao TEA5767 Radio DIY Kit FM Digital Radio Electronic DIY Soldering KitRead More
LILYGO TTGO T-Watch Sensor Development Kit STEM Programming Educational Sensor Module Multiple Function Sensor
$216.66Smart ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.More informationhttps://t-watch-document-en.readthedocs.io/en/latest/introduction/index.htmlhttps://github.com/Xinyuan-LilyGO/TTGO_TWatch_LibraryHardware SpecificationsChipset:ESP32, dual-core MCU, PMU power managementFLASH:QSPI flash 16MB / PSRAM 8MBSRAM:520 kB SRAMButton:power key, IO36Extended function:Reference enhanced version and sensor kitUSB to TTL:CP2104Modular interface:UART, SPI, SDIO, I2C, LED PWM, PWM, …
CCM5D DC 6V-30V 6A DC Motor Speed Controller LED Display PWM Variable Speed Regulator with Shell
$17.48Motor PWM Speed ControllerAdd to cartFeatures• CCM5D DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM). • Large 0.56 inch 3-digit LED display numbers allow viewing under the most adverse conditions.• The display range of 3-digit LED display is “000 Inch-“100 Inch. ( For example, displayed “60 Inch, it means that the PWM output …
Clear BorosilicateGlass Pipe Detachable Glass Pipe Bottle Glassware
$73.55Laboratory BottleAdd to cartDescriptionTransparent Detachable Pipe Bottle for Eliminating Unwanted Odors and HarmSpecificationColor:ClearJoint Diameter:14 mmHeight:355 mm/14inchMaterial:High Borosilicate GlassFeatures1. Convenient to carry.2. Attractive appearance.3. Reusable and easy to clean.4. Help eliminate unwanted odors from your finger tips.5. Made from borosilicate glass for the smoking experience.6. Allow you to enjoy the full flavor of your smoke while reducing the tar …
Clear BorosilicateGlass Pipe Detachable Glass Pipe Bottle GlasswareRead More
Reviews
There are no reviews yet.