3pcs 12V Lead-acid Battery Capacity indicator Power Measurement instrument Tester with LED Display
$17.28
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Work Current:5-15mA (with backlight)
Work Voltage:6-12V
Energy Resolution:1%
Voltmeter Accuracy:1%
Using Temperature Range:-20- 70degrees
Operating humidity:10-80%(non-condensing)
Black wire connect negative electrode
Red wire connect positive
External dimension:48*29*21 mm
Hole Dimensions:45.5*26.5 mm
How to Use
1. Pull the white button on the backside for about 3s until it shows “1-U Inch and release it. Pull it again for 1s it shows “2-b Inch and release it. Pull it again for another 1s it shows “3-c Inch and release it. Pull it again for another 1s it shows “4-d Inch.
2. When it shows “1-U Inch, pull the white button for 3s then you can adjust the voltage admeasuring apparatus. Pull it for a longer time, the voltage goes up. Then pull it for another longer time, the voltage goes down. Do it again and again. To save and exit Automatically after the screen is twinkling.
3. When it shows “2-b Inch, you can change the type of battery.
12V:1pc 12V Lead-acid battery
3.7V:1pc 3.7V Lithium polymer battery
3.2V:1pc 3.2V Lithium iron phosphate battery
1.2V:1pc 1.2V NiMH battery
4.When it shows “3-c Inch, you can adjust the number of batteries
Please refer to the following
12V Lead-acid battery:1-8pcs
3.7V Lithium polymer battery:2-28pcs
3.2V Lithium iron phosphate battery:3-32pcs
1.2V NiMH battery:10-70pcs
5. When it shows “4-d Inch, you can adjust the display mode. “V Inch is voltage mode. “% Inch is percentage mode. “V % Inch is voltage& percentage cycle mode.
Capacity Display Parameters
Battery voltage > 11.2V, 1 grid
Battery voltage > 12V, 2 grid lights
Battery voltage > 12.5V, 3 grid lights
Battery voltage > 13.3V, 4 grid lights
When the battery voltage is
Package Included
3 x 12V Digital Battery Capacity Tester
Weight | 0.051 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.