QFRD-72 ON/OFF Relay Module infinite Cycle Time Adjustable Timer Relay
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Voltage:AC 100V-250V, can be used for 100V/110V/120V/127V/220V/230V/240V mains.
Power consumption
Output:Active output with the same output voltage as the input voltage. Do not exceed 10A at most.
Life:100,000 movements
Input:Passive switch input, the green light will be on first after starting, and will stay in red after stopping.
Time range:0.5 seconds – 1000 minutes
Time accuracy:Range maximum * 0.001, ie 1000 resolution.
Input (start button):Passive switch input, the green light will be on first after starting, and will stay in red after stopping.
Function:With start/stop function, the module enters the infinite loop mode after starting, and the relay works on and off according to the set time.
Dimensions:length 88mm * width 38mm * height 22mm or less
Screw hole:center distance 83mm * 33mm, aperture 3.2mm
Terminal
–>N connected to the load N line, most appliances do not need to strictly distinguish the LN line
–>L1 is connected to the load L line, most appliances do not need to strictly distinguish the LN line
–> The normally closed end of the LNCL line output is generally not connected.
Instructions
Time can be set in both power-on and power-off states
1.ON duration setting
The potentiometer adjustment time under the RUN TIME flag is clockwise for increasing the length and counterclockwise for shortening the duration.
The left side of the dial switch on the potentiometer is the time range setting. The adjustment range of the adjustable resistor after dialing is 0-100; the range after dialing is 0-1000.
The right side of the dial switch on the potentiometer is the unit setting. Dial down to Sec. The unit is seconds; dial to Min. The unit is minutes.
2.OFF duration setting
The potentiometer adjustment time under the OFF TIME flag is clockwise for increasing the length and counterclockwise for shortening the duration.
The left side of the dial switch on the potentiometer is the time range setting. The adjustment range of the adjustable resistor after dialing is 0-100; the range after dialing is 0-1000.
The right side of the dial switch on the potentiometer is the unit setting. Dial down to Sec. The unit is seconds; dial to Min. The unit is minutes.
3. Start button
Connect to the self-reset button, press once to switch to the green light, indicating that the running state, the module will automatically work according to the set running time and stop time, infinite loop. At this point, press the start button again, the module will switch to red light, indicating that it is in a stopped state.
4. Example of time setting
Demand:20 seconds on, 30 minutes off, infinite loop.
Settings
(1). Set the running time range to 0-100;
(2). Dial the running time unit to the second;
(3). Rotate the running time potentiometer to the 20 position, which is 20/100 from the left;
(4). Set the stop time range to 0-100;
(5). Dial the stop time unit to the minute;
(6). Rotate the stop time potentiometer to the 30 position, that is, the position from the left 30/100;
Note:The position of the potentiometer can also be quickly located by measuring the voltage. The center arm is adjusted to a minimum of 0V and the highest position is 5V. For example, you need to adjust to 20, that is, 20/100*5V=1.0V; to adjust to 30, then 30/100*5V=1.5V
Applications
It is used for reciprocating stroke control, or repeated power-off of equipment and product aging test.
Warmly Noted
1. The start button can be used with a current of 0.1A or more.
2. The button output line is equipped with strong electricity. When installing, be sure to meet the creepage distance requirements to prevent personal contact with the charged body.
3. It is not necessary to start the input. You can short the two terminals with wires, so that the power will start to run infinitely without buttons.
Package Included
1 x QFRD-72 ON/OFF Relay Module Infinite Cycle Time Adjustable
Weight | 0.04 kg |
---|
Customers Also Viewed
20pcs ADC CMOS CD74HC4067 16CH Channel Analog Digital Multiplexer Module Board Sensor Controller
$34.67Sensor & Detector ModuleAdd to cartDescription1. This is a board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch – it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can’t be higher …
10pcs Geekcreit Colorful 3D Mini SMD PCB Stereo Christmas Tree DIY Music Kit
$45.51DIY Electronic KitsAdd to cartDescriptionThis is a simple mini Christmas tree DIY kit. Three different PCBs are combined into a 3D stereo Christmas tree model. A variety of different colors can be selected. It can be powered by a button battery and can be free from the power supply. Built-in 7 LED gradient modes plus 7 different Christmas melody.Manual:Click …
10pcs Geekcreit Colorful 3D Mini SMD PCB Stereo Christmas Tree DIY Music KitRead More
1 Copper Sheet + 2 Aluminum Sheets Heatsink Kit with Black Glue for Raspberry Pi 4B
$9.10Raspberry Pi & Orange PiAdd to cartDescriptionsThe colorful set is 1 copper sheet and 2 aluminum sheets. They are designed for Raspberry Pi 4B for heat dissipation.Package Included1 x Copper Sheet2 x Aluminum Sheets
pyWiFi- ESP8266 Development Board Micro-Python IoT Wireless WiFi Learning Kit
$90.96Motherboard & Development BoardAdd to cartpyBase Boardpyboard interface:support pyboard, pyWiFi-ESP32, pypyWiFi-ESP82662.54mm pin header:lead out all interfaces of pyboardButton * 2:RST and USR buttons are brought outPotentiometer:ADC inputPassive buzzer:DAC outputButton battery holder:Install CR1220 button batteryServo interface:servo interface * 1- * 4 (external isolation circuit is required to connect the servo)OLED interface:4P / 0.96inch / I2C / OLED Display1.77 Inch LCD interface:suitable …
pyWiFi- ESP8266 Development Board Micro-Python IoT Wireless WiFi Learning KitRead More
3pcs 433MHZ High Power Wireless Transmitter Module 3000M Long Range ASK Transceiver Board
$29.79Smart ModuleAdd to cartFeatureProduct Name:Wireless 3000m Transmitter ModuleProduct type ZAB-3000 (without coding)Dimensions:45mm*17mm*6.2mmWorking voltage:DC 9V ~12VWorking current:200~220mAOperating frequency:433MHzTransmit power:>10mwLaunch distance:2000-3000 metersRadiated power:1.5 WModulation method:ASKQuiescent current:0uARated parameter:Symbol:ValueDC supply voltage:VDD-VSS:5VStorage temperature range (TS):TSTG:-12°C to 75°CWelding temperature:+260°C:PIN:Description1:ANT:RF signal input pin, this pin should be connected to the antenna2:VSS:Positive power supply3/4:GND:Negative power supply5:DATA:Data signal output, compatible with CMOS levelsPackage includes3 x Wireless 3000m …
3pcs 433MHZ High Power Wireless Transmitter Module 3000M Long Range ASK Transceiver BoardRead More
10Pcs DHT11 Digital Temperature Humidity Sensor Module for
$25.06Electronic Accessories & SuppliesAdd to cart10Pcs DHT11 Digital Temperature Humidity Sensor Module For Description DHT series numeric humiture sensor Humidity measuring range:20%-90%RH(0-50°Ctemperature compensation) Temperature measuring range:0 to +50°C Humidity measurement accuracy:±5.0%RH Temperature measurement accuracy:±2.0°C Response time Low power consumption Size:about 2.3cm x 1.2cm x 0.5cm Applications HVAC Testing and inspection equipment Automotive Data logger Consumer goods Automatic control Weather station …
10Pcs DHT11 Digital Temperature Humidity Sensor Module forRead More
Reviews
There are no reviews yet.