JK11S-100S-5V 10A 0-100S Adjustable ON-OFFf Delay Module Timer Cycle Switch infinite Loop Relay Module
$8.73
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Voltage:5V DC
Quiescent current:8mA
Operating current:95mA
Trigger:passive switch trigger, response time is 0.03 seconds (the trigger terminal can not access the active signal)
Minimum on-off time:0.2 seconds
Load capacity:10A
Output form:normally open + normally closed
Size:70*20*19mm
Features
– Using industrial-grade single-chip microcomputer to control time, high precision and stable performance;
– Two adjustable resistors are used to adjust the time, and the connection duration and the disconnection time can be independently adjusted;
– The external contact is activated, and the timing is started by shorting the self-reset button. It is also possible to start the countdown by shorting the triggers together to achieve power-on;
– The time range is divided into 0-100 seconds.
Basic working principle
Taking the factory standard setting as an example, the red LED will light when the power is turned on, and the relay is in the off state. When shorted at the trigger end, the module green light is on and immediately enters the working state. Triggering again in the working state will stop working.
In the working state, the relay will pass T1 seconds, break T2 seconds, pass T1 seconds, break T2 seconds… infinite loop. T1 T2 is the length of time the user adjusts with an adjustable resistor.
Instructions
– Power access
The module is connected to the power supply according to the correct power supply voltage and polarity. The red line of the power supply terminal is positive and the black line is negative.
– Trigger line access
The two white lines of the trigger end are connected to a switch, and the module can be started by tapping the switch, and then the switch is stopped by tapping the switch. The trigger switch can be a tact switch, a micro switch, an optocoupler C-E terminal, a relay contact, and the like.
– Normal speed and quick mode settings
The OP1 jumper is used to select normal speed and fast mode, and the shipment defaults to normal speed.
– Loop mode and single mode settings
The OP2 jumper is used to select the loop mode and the single mode, and the shipment defaults to the loop mode.
Cycle mode:After starting, the relay is on-off-on-off-disconnect…, and it is cycled according to the set duration;
Single trigger:After starting, the relay is turned on, and the relay is turned off after T1 duration. (After disconnection, the action ends and waits for trigger again)
Precautions
1. The module power supply is not protected against reverse protection, because it is important to remember that the power supply cannot be connected.
2. The trigger terminal can only be connected to the passive switch, not to the voltage signal. Doing so can damage the module.
3. When the resistance load is connected, no special treatment is needed; when the capacitive load is connected, the relay module is easily damaged by electricity. It is recommended to use the AC contactor derated or the contact current of the motor should be considered within 10A.
Package Included
1 x JK11S-5V 100S Delay Adjustable Multi-function Relay Module
Weight | 0.019 kg |
---|
Customers Also Viewed
LILYGO TTGO T2 ESP32 0.95 OLED SD Card WiFi + bluetooth Module Development Board
$48.10Motherboard & Development BoardAdd to cartDescriptionFor more product information, please visit:https://github.com/LilyGO/TTGO-T2-ESP32Pin diagramPackage included1 x ESP32 T2(This product does not include battery)2 x Pin1 x Power Cable
50Pcs White Plastic for Rotary Taper Potentiometer Hole 6mm Knob
$8.17Electronic Accessories & SuppliesAdd to cartFeaturesPractical and convenient to use.Hat knobs are high quality, suitable stalk (round shaft) potentiometers.Suitable for 0.6cm shaft diameter potentiometer.SpecificationsColor:WhiteMaterial:PlasticQuantity:50 pcsSize:13 x 17mm (D x H)Inner hole diameter:6mmPackage included50 x Potentiometer Knob
BESTEP 1 Channel 5V Low Level Solid State Relay Module with Fuse 250V2A for Auduino
$6.55Relay ModuleAdd to cartDescription1. 5V solid state relay 240V 2A, output with resistance fuse 240V 2A.2. Size:25*34*25 (length * width * height) Net weight:13g3. Input power:5V DC (160MA)4. Input control signal voltage:(0-1.5V state low level relay ON) (2.5-5V state high level relay OFF)5. The blue KF301 terminal is more convenient to connect to the control line.Module interfaceInput sectionDC+:Connect …
BESTEP 1 Channel 5V Low Level Solid State Relay Module with Fuse 250V2A for AuduinoRead More
Liquid Transfer Siphon Pump Hand Gas Oil Water Fish Tank Battery Power Aquarium
$38.46Electrical Pump & ValveAdd to cartDescriptionFree Electric Battery Syphon Powered Pump – This Cordless water pump will move water for you!Just dip the end into the water and press the on switch, and this remarkable lightweight syphon pump will draw water through the pipe and pump it out of the hose.FeaturesIdeal for thousands of uses around the homeEmptying water buttsDraining …
Liquid Transfer Siphon Pump Hand Gas Oil Water Fish Tank Battery Power AquariumRead More
150pcs 1W Metal Film Resistor 1% 470 ohm
$11.53Electronic Accessories & SuppliesAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionPower:1WResistance value:470┯Resistance tolerance:÷1%Package included150 x Resistor
3PCS 315MHz 220V 10A 1CH Channel Wireless Relay Remote Control Switch Receiver
$19.84Relay ModuleAdd to cartSpecification1. Input Voltage:AC85V-AC220V2. RF Frequency:315MHZ3. RF Working mode:Super heterodyne receiver4. Receiver Sensitivity:-107dBm5. Remote Control Distance:>100 meter(In open environment)6. Decoding Way:MCU Software decoding7. Can store the number of remote control:328. Support remote control type:Fixed code, learning code9. Channel:1CH10 .Multiple working modes:(Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched)11. Wiring Method:Fixed wiring terminal12. Rated load:10A 250VAC / 10A 125VAC, 10A 30VDC …
3PCS 315MHz 220V 10A 1CH Channel Wireless Relay Remote Control Switch ReceiverRead More
DC 5V Portable USB Rechargeable Water Cooler Cooling Fan Desk Mini Air Conditioner
$34.41Solar CollectorsAdd to cartSpecificationsMode of operation:mechanicalRated power:5WRated voltage:DC5V 1.0AInput voltage:DC 5VInput current:0.5AWind speed:1 meter away from wind speed, greater than 4.0 m / sNoise:less than 36dBWater tank capacity:less than 1 literPower mode:USBBattery:three sections 5Switch type:normal buttonShaking his head:shaking his head up and downTiming function:no timingWind speed gear:1 fileAir supply type:natural windSize:11.5*11*13.5cmSTEPS FOR USAGE1. Unpack and remove the product;2. …
DC 5V Portable USB Rechargeable Water Cooler Cooling Fan Desk Mini Air ConditionerRead More
Reviews
There are no reviews yet.