JK11S-100S-5V 10A 0-100S Adjustable ON-OFFf Delay Module Timer Cycle Switch infinite Loop Relay Module
$8.73
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Voltage:5V DC
Quiescent current:8mA
Operating current:95mA
Trigger:passive switch trigger, response time is 0.03 seconds (the trigger terminal can not access the active signal)
Minimum on-off time:0.2 seconds
Load capacity:10A
Output form:normally open + normally closed
Size:70*20*19mm
Features
– Using industrial-grade single-chip microcomputer to control time, high precision and stable performance;
– Two adjustable resistors are used to adjust the time, and the connection duration and the disconnection time can be independently adjusted;
– The external contact is activated, and the timing is started by shorting the self-reset button. It is also possible to start the countdown by shorting the triggers together to achieve power-on;
– The time range is divided into 0-100 seconds.
Basic working principle
Taking the factory standard setting as an example, the red LED will light when the power is turned on, and the relay is in the off state. When shorted at the trigger end, the module green light is on and immediately enters the working state. Triggering again in the working state will stop working.
In the working state, the relay will pass T1 seconds, break T2 seconds, pass T1 seconds, break T2 seconds… infinite loop. T1 T2 is the length of time the user adjusts with an adjustable resistor.
Instructions
– Power access
The module is connected to the power supply according to the correct power supply voltage and polarity. The red line of the power supply terminal is positive and the black line is negative.
– Trigger line access
The two white lines of the trigger end are connected to a switch, and the module can be started by tapping the switch, and then the switch is stopped by tapping the switch. The trigger switch can be a tact switch, a micro switch, an optocoupler C-E terminal, a relay contact, and the like.
– Normal speed and quick mode settings
The OP1 jumper is used to select normal speed and fast mode, and the shipment defaults to normal speed.
– Loop mode and single mode settings
The OP2 jumper is used to select the loop mode and the single mode, and the shipment defaults to the loop mode.
Cycle mode:After starting, the relay is on-off-on-off-disconnect…, and it is cycled according to the set duration;
Single trigger:After starting, the relay is turned on, and the relay is turned off after T1 duration. (After disconnection, the action ends and waits for trigger again)
Precautions
1. The module power supply is not protected against reverse protection, because it is important to remember that the power supply cannot be connected.
2. The trigger terminal can only be connected to the passive switch, not to the voltage signal. Doing so can damage the module.
3. When the resistance load is connected, no special treatment is needed; when the capacitive load is connected, the relay module is easily damaged by electricity. It is recommended to use the AC contactor derated or the contact current of the motor should be considered within 10A.
Package Included
1 x JK11S-5V 100S Delay Adjustable Multi-function Relay Module
Weight | 0.019 kg |
---|
Customers Also Viewed
3 x 100pcs RM065 Horizontal Trimpot Potentiometer Assortment Kit with Storage Box
$33.28Electronic Accessories & SuppliesAdd to cartSpecificationsModel Number:RM065Operating Temperature:-5 °C to +70 °CTechnology:Carbon FilmType:Trimming PotentiometerRated Power:0.1WResistance Tolerance:±20%Max. Operating Voltage:50VResistance:100 ohm-1M ohm (Variable Resistor)Package included3 x 100pcs 10 Values RM065 Horizontal Trimpot Potentiometer Assortment Kit
ICE-Tower CPU Cooling Fan V2.0 Super Heat Dissipation Different Colors LEDs for Raspberry Pi 3B+/4B
$46.37Raspberry Pi & Orange PiAdd to cartDescriptions1. According to Moore’s law, the design of high-speed and high-density printed circuit board (PCB) is becoming more and more complex.2. Higher processing performance will generate more heat. 3. This super ICE Tower CPU Cooling Fan for Raspberry Pi is burned for solving heat dissipation problem! 4. Tower structure, 5mm copper tube, multi-layer heat sinks, …
20pcs WITRN-CC001 TYPE-C Male to Female Connector TYPE-C Adapter Board Test Fixture Module
$201.72Converter BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.FeaturesAll interfaces of TYPE-C adapter board are led out, all interfaces are independent, which is convenient for TYPE-C development and debugging.Package Included20 x WITRN-CC001 TYPE-C Adapter Board
3pcs M5Stack SG90 Servo 9G SERVO Plastic Teeth Work with 8Servos HAT and PuppyC
$34.70Other Module BoardAdd to cartDescriptionSG90 servo is a M5Stack custom 9g servo.The angle of rotation is 0°~180°,it can be used with 8Servos HAT and PuppyC.This small servo is very easy to use for beginners. You don’t have to use a dedicated drive board with feedback control,Any common servo driver and microcontroller can easily turn it up.Compared to driving a …
3pcs M5Stack SG90 Servo 9G SERVO Plastic Teeth Work with 8Servos HAT and PuppyCRead More
Wireless Electric 360 Spin Cleaning Brush Floor Kitchen Household Brush +5 Heads
$87.06Switch AccessoriesAdd to cartFeatures1. Perfect Multiple Cleaning Tasks — Automatic cleaning scrubber can be used indoor and outdoor, it’s great for curves, tile, sink bowls, toilets, bathtub, door slots, shower windows, it also cleans car tires and mags well.2. Harsh and Abrasive Cleaners — Our flexible bristles mold into cracks and crevices, corners, and shower tracks for a …
Wireless Electric 360 Spin Cleaning Brush Floor Kitchen Household Brush +5 HeadsRead More
Reviews
There are no reviews yet.