JK11S-100S-5V 10A 0-100S Adjustable ON-OFFf Delay Module Timer Cycle Switch infinite Loop Relay Module
$8.73
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Voltage:5V DC
Quiescent current:8mA
Operating current:95mA
Trigger:passive switch trigger, response time is 0.03 seconds (the trigger terminal can not access the active signal)
Minimum on-off time:0.2 seconds
Load capacity:10A
Output form:normally open + normally closed
Size:70*20*19mm
Features
– Using industrial-grade single-chip microcomputer to control time, high precision and stable performance;
– Two adjustable resistors are used to adjust the time, and the connection duration and the disconnection time can be independently adjusted;
– The external contact is activated, and the timing is started by shorting the self-reset button. It is also possible to start the countdown by shorting the triggers together to achieve power-on;
– The time range is divided into 0-100 seconds.
Basic working principle
Taking the factory standard setting as an example, the red LED will light when the power is turned on, and the relay is in the off state. When shorted at the trigger end, the module green light is on and immediately enters the working state. Triggering again in the working state will stop working.
In the working state, the relay will pass T1 seconds, break T2 seconds, pass T1 seconds, break T2 seconds… infinite loop. T1 T2 is the length of time the user adjusts with an adjustable resistor.
Instructions
– Power access
The module is connected to the power supply according to the correct power supply voltage and polarity. The red line of the power supply terminal is positive and the black line is negative.
– Trigger line access
The two white lines of the trigger end are connected to a switch, and the module can be started by tapping the switch, and then the switch is stopped by tapping the switch. The trigger switch can be a tact switch, a micro switch, an optocoupler C-E terminal, a relay contact, and the like.
– Normal speed and quick mode settings
The OP1 jumper is used to select normal speed and fast mode, and the shipment defaults to normal speed.
– Loop mode and single mode settings
The OP2 jumper is used to select the loop mode and the single mode, and the shipment defaults to the loop mode.
Cycle mode:After starting, the relay is on-off-on-off-disconnect…, and it is cycled according to the set duration;
Single trigger:After starting, the relay is turned on, and the relay is turned off after T1 duration. (After disconnection, the action ends and waits for trigger again)
Precautions
1. The module power supply is not protected against reverse protection, because it is important to remember that the power supply cannot be connected.
2. The trigger terminal can only be connected to the passive switch, not to the voltage signal. Doing so can damage the module.
3. When the resistance load is connected, no special treatment is needed; when the capacitive load is connected, the relay module is easily damaged by electricity. It is recommended to use the AC contactor derated or the contact current of the motor should be considered within 10A.
Package Included
1 x JK11S-5V 100S Delay Adjustable Multi-function Relay Module
Weight | 0.019 kg |
---|
Customers Also Viewed
1002 HIFI 2x100W TPA3116 AUX+ bluetooth 5.0 HIFI High Power Digital Amplifier Stereo Board AMP Amplificador Home theater
$34.98Amplifier BoardAdd to cartThis is 1002 HIFI ,If you need other parameters, please click ID to buy.502C HIFI ID:1582750502L MINI ID:16526301002L MINI ID:1652631SpecificationsFeatures– This product is full of materials, featuring high performance and high performance price, especially for HIFI music power amplifier with high power and high fidelity.– TPA3116D2 is a type D amplifier IC launched by TI …
3Pcs Waveshare FT232 Module USB to Serial USB to TTL FT232RL Communication Module Mini Port Flashing Board
$39.35Converter BoardAdd to cartFeaturesUse original FT232RLSupport Linux, Android, WinCE, Windows 7/8/8.1/10…Support 3 power supply modes:5V external power supply; 3.3V external power supply; external power supply (requires 3.3V-5V)With 3 LEDs:TXD LED, RXD LED, POWER LEDTXD, RXD, RTS , CTS:lead out with curved pinOther functions PIN:reserved pad (distribution pin, row seat, can be plugged into or plugged into the user …
40 Pin 2.54mm Male Female SIL Socket Row Strip PCB Connector
$4.58Electronic Accessories & SuppliesAdd to cartDescriptionPitch:2.54mm Gender of Connector:Male & FemaleNumber of Pins:40 PinType of Row:Single-RowType of connector:StraightColor:BlackPackage include1 x 40Pin Single Row Straight Male1 x 40Pin Single Row Straight Female
5 Pcs Sliver Aluminum Alloy Case with Cooling Fan Protective Shell Metal Enclosure fit for Raspberry Pi 4 Model B
$93.66Raspberry Pi & Orange PiAdd to cartThe Raspberry Pi is not included, you could get it here:Raspberry Pi 4 Model BDescriptionThis is a Protective case designed specifically for Raspberry Pi 4 Model BThe product is made of aluminum and it is very strong,high hardness, pressure resistance, strong metallic luster, not easy to rust,it can perfectly protect your motherboard Aluminum alloy material …
Wooden Stereo Puzzle Building Blocks Kids Early Educational Learning Toys Gifts
$26.31MathematicsAdd to cartSpecificationsName:Wooden Puzzle Building Blocks ToysModel:E27991Materials:WoodenSuitable Age:Three years old and aboveProduct Category:stereo puzzleFeatures-Enrich your baby’s imagination and creativity, and cultivate your baby’s hands-on ability.-Spell different animals through different shapes, teach your baby to know animals.-Use high-quality wood, clear texture, even wood, soft and smooth color tone.-Free a non-woven storage bag to let your baby manage his …
Wooden Stereo Puzzle Building Blocks Kids Early Educational Learning Toys GiftsRead More
5pcs bluetooth 4.0 Audio Receiver Board for Stereo Dual Channel Audio Speaker Amplifier JDY-62
$22.79Smart ModuleAdd to cart>>>Manual:Click here to openNote:Pins can be soldered to pins or patches with 2.54mm pitch and 2.54 pin headersPins:Function:Description1:VCC:Voltage range 4.2 to 5V, can’t exceed 5V2:GND:Power GND3:L:Left channel output4:R:Right channel output5:MUTE:High level when mute, usually low level6:KC:Empty pinCommon problem1. No bluetooth searchGenerally caused by power supply interference, the power supply line must be added with LC …
19S 60V LiFe Po4 Battery 3.2V Power Protection Board 30A-180A with Temperature Protection Equalization Function Overcurrent Protection BMS Battery Protection Board
$60.74Battery Protection ModuleAdd to cartCurrent 30A / Current 40A / Current 50A / Current 60A / Current 70A / Current 100A / Current 150A / Current 180A / Current 130A /
10pcs CJMCU-832 PAM8302 Single Channel Class D Audio Power Amplifier Development Board
$33.05Amplifier BoardAdd to cartDescriptionThis super small mono amplifier is surprisingly powerful – able to deliver up to 2.5 Watts into 4-8 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.0V-5.5VDC. Since the amp is a class D, its very efficient (over 90% efficient when driving an 8Ω speaker at over …
10pcs CJMCU-832 PAM8302 Single Channel Class D Audio Power Amplifier Development BoardRead More
Reviews
There are no reviews yet.