5pcs TK10-1P 1 Channel Relay Module High Level 10A MCU Expansion Relay 12V
$11.33
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Voltage:12V
Quiescent current
Dynamic current:25mA@24V, 45mA@12V, 85mA@5V
Signal:>2V, 0.5mA
Response time:50mS
Features
– the control area and the load area and the contact are in accordance with the creepage distance requirement;
– With relay action indication, the suction is bright, and the disconnection is not bright;
– Can be used as a microcontroller development board module, can be used as home appliance control;
– Control DC or AC signal, can control 220V AC load, load capacity up to 10A250Vac or 10A30VDC;
– With a normally open and a normally closed contact, the wiring is more flexible.
Package Included
5 x TK10-1P 1 Channel Relay Module High Level 10A
| Weight | 0.075 kg |
|---|
Related products
Photosensitive Resistance Sensor with Relay Module 5V Optical Control Light Tracking Switch Module
$7.17Relay ModuleAdd to cartUsageLight detection, brightness detection, potentiometer can be adjusted to detect the brightness of the valve point, with its own relay, can do a variety of brightness detection switch.Features1. Using the photoresistor to induce the intensity of light, with its own relay, directly control the load2. Adjust the sensitivity with the potentiometer. Set the start relay …
QF1023-A-10S Timing Relay Delay Switch Relay Delay Timer Switch Timing Relay 10S Adjustable
$6.56Relay ModuleAdd to cartSpecificationsWorking voltage:12V DCDelay length:0-10SAccuracy:1/100Error:2%Delay:using single chip delayPCB size:70*26*18mmInstallation hole center distance:64mmAperture:3mmFunction:Turn on the relay immediately after power-on, and automatically break after a period of time;Special reminder:This is not a power-off delay disconnect module, the relay will be disconnected immediately when the input power is disconnected.Package Included1 x QF1023-A-10S Timing Relay Delay Switch Relay Delay Timer …
QF1023-A-10S Timing Relay Delay Switch Relay Delay Timer Switch Timing Relay 10S AdjustableRead More
YYW-1S Temperature Control Relay Module Temperature Controller Switch Detection Board industrial Equipment 30A 6-36V DC
$19.84Relay ModuleAdd to cartSpecificationsWorking voltage:6-36V DCMaximum current:30ALead length:1MTemperature measurement range:-40.0-125 →Upper and lower limit temperature values can be set:0 -125 →Features1. The delay time can be set to prevent the output from oscillating and causing damage to the entire circuit. For example, if the temperature is higher than 30 degrees Celsius, the relay is disconnected. After the delay …
Customers Also Viewed
3pcs 9V 1A Power Supply Adapter US Plug 2-Flat-Pin for
$19.71Electronic Accessories & SuppliesAdd to cartDescription 2-flat-pin US plug for Works with most devices that use a 9V adaptor and less than 1A of power Specification Color:Black Input:100~240V AC, 50/60Hz Output:9V DC, 1A Connector size:5.5 x 2.1mm Cable length:90cm Dimensions:2.91 x 1.57 x 1.06inch (7.4 x 4 x 2.7cm) Package included 3 x 9V 1A power adapter
Prototype Board 400 Hole Breadboard + 65pcs Breadboard Jump Cable
$10.92Electronic Accessories & SuppliesAdd to cartPrototype Board 400 Hole Breadboard + 65pcs Breadboard Jump CableFeatureThis is the Prototype board Electronic deck + 65pcs Breadboard tie line Wire cable.Ideal for high frequency and low noise circuitsDimension:8.3cm x 5.5cm x1.0cmWire size:Suitable for 20-29 AWG(0.3-0.8mm) wiresJump Cable Wires65Pcs Mixed Color Male to Male Solderless FlexibleBreadboard Jump Cable WiresThis a high quality 65 piece …
Prototype Board 400 Hole Breadboard + 65pcs Breadboard Jump CableRead More
20pcs CH340 3.3V/5.5V USB To TTL Converter Module CH340G STC Download Module Upgrade Brush Board
$35.30Converter BoardAdd to cartFeaturesBuilt-in USB to TTL Transfer chip.Designed to be used for USB to TTL electronic projects.TTL interface output, easy to connect to your MCU.Status LED.Dual 3.3V and 5V Power output, work with 3.3v and 5v target device.Size:55mm x 16mmServer 2008/Win7/Win8 32 bits / 64 bits1. Support WINDOWS 98 / ME / 2000 / XP/Server 2003/VISTA /2. …
140 DC 12V LED PIR Body infrared Auto Motion Sensor Switch on/off Strip
$13.11Electronic Accessories & SuppliesAdd to cartFeatureHigh sensitivity, easy for installing.Gray cable is positive electrode.White cable is negative electrode.Widely used on the Motion-activated lighting, LED strips security system, automatic sensory device and more.The sensor is not waterproof; don’t install it in any place with heavy water and humidity.Specification-Switch mode:PIR sensor-Color:Black+White-Material:Plastic-Size:As the picture shows-Operating voltage:3-12v-Load current:2A-Detecting range:140°-Detecting distance:1~3m-Delay time:15sAttention1. Don’t install in …
140 DC 12V LED PIR Body infrared Auto Motion Sensor Switch on/off StripRead More
Reviews
There are no reviews yet.