RD21F Delay Relay Module Power for Delay off Fan Module AC 100V-220V Time 0.2S-300min Adjustable Delay
$13.11
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Voltage:100V-220V AC
Power consumption
Output:The output voltage is the same as the input voltage, and the maximum power supply capacity is 10A.
Size:88* 36 * 22mm
Screw hole:center distance 83mm * 31mm, aperture 3.2mm
Time range:(4 files, selected by switch)
First gear:range 0.2 seconds-30 seconds, accuracy:0.1 seconds
Second gear:range 0.2 seconds – 300 seconds (5 minutes), accuracy:0.3 seconds
Third gear:range 0.2 seconds-30 minutes, accuracy:1.8 seconds
Four gears:range 0.2 seconds – 300 minutes (5 hours), accuracy:18 seconds
Terminal block
L:Firewire access
L2:Switch output side live wire, taken from the heating body
N:Zero line (public)
FAN:fan output, live wire
Instructions
Note:The start button needs to be able to withstand the load current for a short time (about 0.3 seconds), which means that if you control the 5A current fan, the start button should be able to withstand 5A and above for a short time.
Time range setting
When the selector switch is placed in the 30 position, it means 0-30 adjustable
When the selector switch is placed at position 300, it indicates that 0-300 is adjustable.
Adjustment of time value
Adjustable resistance rotates counterclockwise to the direction of the number to reduce the time, clockwise to the + direction to increase the time
Time unit setting
When the selector switch is placed in the Sec position, the unit is:second
When the selector switch is placed in the Min position, the unit is:minute
Example
Request a delay of 50 minutes
1. The range is placed at 300 position
2. The time unit is placed in the Min position.
3. Adjust the adjustable resistance to 50 position, adjust to 300, so adjust to 1/5 is 50.
Note:The potentiometer adjustment can also be quickly adjusted with the multimeter voltage file. For example, the range is 30, and it needs to be adjusted to 12, then the voltage can be adjusted to 2.
t=Ut/5*30=2.0V / 5.0V * 30 =12
Ut is the voltage measured by the multimeter, 30 is the range selected by the selector switch, and can also be selected to 300.
Package Included
1 x RD21F Delay Relay Module Power for Delay Off Fan Module
Weight | 0.052 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.