AC 110V-220V 12V 24V Digital LED Dual thermometer Temperature Controller thermostat incubator
$36.44
Voltage 220V / Voltage 24V / Voltage 12V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
This is a dual display and dual control temperature controller, it can both control refrigeration or heating of two products, setting method is same of left and right.
Temperature control range:-50℃~110℃
Temperature measurement error:±0.5℃
Sensor model:ntc(10K/3435)
Control precision:DC12V/DC24V/AC220V(can be choose)
Working current:MAX200Ma
Relay contact current:AC5A/ 110V-220V
Working temperature:0℃~50℃
Storage temperature:-10℃~60℃
Meter length:90mm(L) x 60mm(W) x 26.5mm(H)
Hole size:70mm(L) x 50mm(H)l
Distribution probe length is 1m, Probe size:Φ4mm x 20mm
Menu code description
Menu code:Specify:Explanation:Unit
HC:Refrigeration/heating:Thermostat working mode set:H=Heating C=Cooling
D:Return difference:Temperature difference between start up & shutdown:℃
LS:Ultralow temperature:AL-L:℃
HS:Ultra-temperature:AL-H:℃
CA:Temperature correction::℃
PT:Delay start:Minimum downtime:MInute
Wiring Diagram
Instruction
Set the left control temperature
Press the “SET InchKey board and left screen flashes.Press “UP Inch and “ Down “key board to adjust temperature range,press right “UP Inch or “Down Inchkey board (Any one) to preserve then exit.
Set the right control temperature
Press twice “SET Inchboard and right screen flashes, Press InchUP Inch and “Down InchKey board to adjust temperature,press right “UP Inch and “Down Inchboard(any one) to preserve then exit.
Start and stop timing
Under the state of standby electric to press the “SET Inch once, start timing output, screen alternately.
Press the “SET Inch Key board three seconds enter into the setting of control parameters.
Press or ▼ key board choose adjust menu. then press SET key board once again to enter into the related state of control parameter setting, press or ▼ key board to adjust parameters which requires modify. Press “SET Inch key board to exit after adjusted, or exited from delayed 6 seconds system.
Cooling heating mode setting.
Press InchSET Inch key board less than 3 seconds, enter into menu display, the code “HC Inch is displaying on screen, press “set Inch key board displayed working mode.Press Inch Inch or “▼ Inchto adjust parameters. InchC Inch means cooling mode, InchH Inch means heating mode.
Return difference function.
Maximum temperature was restricted with return difference between start up and close down.
Return difference setting.
Press InchSET Inch key board less than 3 seconds, enter into the menu display, press “ Inch or “▼ Inch key board to adjust code until screen displayed “D Inch code, press “SET Inch keyboard to displayed value of return difference. Press the “ Inch and “▼ Inch keyboard again to adjust parameters.
Temperature correction function
When there has deviations between measurement temperature and standard temperature. Machine measurement value and standard temperature can adjust to same under function of temperature correction. Temperature after correction=Temperature before correction +value of correction (Value of correction can be positive number ,negative number and zero)
Temperature correction setting.
Press InchSET Inch keyboard less than 3 seconds, enter into menu display, press “ Inch or “▼ Inch keyboard to adjust code until screen displayed “CA Inch, press InchSET Inch keyboard display temperature correction value, Press the “ Inch and “▼ Inch keyboard again to adjust parameters.
Delay protection function
Press InchSET Inch Keyboard less than 3 minutes. enter into the menu display . press “ Inch or “▼ Inch keyboard to adjust code until screen displayed “PT Inch, Press “SET Inch keyboard displayed delay protection setting, Press the “ Inch and “▼ Inchkeyboard again to adjust parameters.
Ultra-temperature alarm function
If measurement temperature ≥control temperature +AH alarm relay actuated, temperature controller alarming, display screen alternated displaying “H Inch and present temperature. Then press anyone keyboards to stop alarming and turn off alarm relay output.
Ultra-temperature alarm setting
Press “SET Inch keyboard less than 3 seconds, enter into menu display, press “ Inch or “▼ Inch keyboard to adjust code until screen displayed “HS Inch. Press ‘SET Inch keyboard displayed the set value of ultra-temperature, press “ Inch or “▼ Inchkeyboard again to adjust parameters, Set up “HS as “0 Inch, you can turn off the alarm function.
Ultralow temperature alarm function.
measurement temperature
Ultralow temperature alarm setting
Press “SET Inch keyboard less than 3 seconds, enter into menu display, press “ Inch or “▼ Inch keyboard to adjust code until screen displayed “LS Inch, press InchSET Inch keyboard displayed the set value of ultralow temperature, press “ Inch or “▼ Inch keyboard again to adjust parameters, Set up “LS Inch as “0 Inch, you can turn off the alarm function.
Status of the Indicator light introduction.
Green means working indicator light, green light long bright means state of cooling or heating. Red light flicking means delay to start up and it with function of setting. Red light long bright means in state of setting.
Press “SET Inch 3 seconds enter into system high ranking menu setting. During the progress of setting, press “ Inch or “▼ Inch keyboard to choose menu which need to adjust. Then press “SET Inch keyboard once again enter into state of related controller parameters setting, press “ Inch or “▼ Inch keyboard to adjust the controller parameters which need to modify, Exited by press InchSET Inch keyboard after adjustment. Temperature controller restart automatically.
Disturbance Display
When sensor disconnected, screen displaying “LLL Inch
When sensor detectedtemperaturebelow measurement range,screen displaying EEE Inch
When sensor detected temperature higher than measurement range, screen displaying “HHH Inch
Caution
Connect to the correct working voltage, machine is regular working within the range of ±10%standard input voltage.
Connect to the power load less than maximum control power of temperature controller. If exceed please using with AC contactor.
Connect to the correct power source, load, sensor, temperature controller will damaged after connected to wrong wire.
Package Included
1 x AC220V 12V 24V Digital LED Dual Temperature Controller
Weight | 0.093 kg |
---|
Customers Also Viewed
M5Stack PLC-Proto industrial Board Module Contains RS485 & ACS712-5B Programmable Logic Controller
$40.53Smart ModuleAdd to cartDescription1. It contains the RS485 adapter. Can realize conversion from Serial 2(G16/17) to RS4852. Including the ACS712-5B module. By reading the electrical level of G34, can get the current value of the port.3. If needs custom made service, please kindly contact sales(at)m5stack.comPackage included1 x M5Stack PLC-Proto Kit with box
12V Magnetic Stirrer Mixer Chemicals Magnetic Mixer Home Lab Liquid Blender Equipement 1L
$48.59Solar CollectorsAdd to cartSpecificationStirring capacity:1LSpeed:0-2500RPMAllowable ambient temperature:5-40 ° CAllowable relative humidity:80%Maximum length of the stirrer:30mmInput power:3WElectrode output power:1WPower supply voltage:50HZWork plate material:polyester filmWorking panel size:85*85 (mm)Package include1X magnetic stirrer (excluding beakers and other accessories)
GY-SHT30-D SHT30 3.3V Digital Temperature and Humidity Sensor Module IIC I2C interface
$10.92Sensor & Detector ModuleAdd to cart*Note:Joint product & Provided by Hobbyant and Newchic.More document click to downdoad:SHT30FeaturesThe digital temperature and humidity sensor module uses the SHT30 chip, and the measurement data is factory corrected, linearized, and temperature compensated. With temperature and humidity alarm output and software and hardware reset function. Avoid use in volatile organic environments in order not to …
GY-SHT30-D SHT30 3.3V Digital Temperature and Humidity Sensor Module IIC I2C interfaceRead More
10pcs AC-DC 12V 2A 24W Switching Power Module Stabilivolt Voltage Regulator AC 100-240V To DC 12V
$60.45Power Supply ModuleAdd to cartDescription1. Input voltage:100-240V2. Output voltage:12V3. Output current:2A4. Output power:24W5. Operating temperature:-30 – +85→6. Size:6.7 x 4.6 x 2.5cmFeatures1. Over-voltage protection2. Over-current protection3. Short circuit protectionPackage included10 x AC-DC 12V 2A 24W switching power module
5Pcs Adjustable HIFI Speaker High and Low Frequency Divider Speaker Audio Crossover Module Board
$26.31Amplifier BoardAdd to cartFeatureFour adjustable two-way frequencyFrequency division method:passive frequency division of inductance and capacitanceCrossover point:about 2.5-4.5KHzPower:within 200WSpeaker configuration:within 15 inches of 200WInterface mode:5.0 2P terminalInterface:input *1, treble *1, bass *1Package includes5 x Frequency Divider
20pcs MQ-4B Sensor Gas Sensor CO CO2 Smoke Methane Sensor Detecting MQ Sensor DIY for Safety Detection System
$39.29Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Overview– The gas sensing material used in the MQ-4B methane sensor is tin dioxide (SnO2) with lower conductivity in clean . When there is a flammable gas in the environment where the …
540mm 24 inch Adjustable Light LED Backlight Kit Upgrade LCD Screen to LED Monitor Module
$12.34Electronic Accessories & SuppliesAdd to cartFeaturesThis backlight strip is perfectly design for screen, high brightness, environmental protection and energy saving.LED particles closely, high-density arrangement ,import highlight LED strips.Long service life, with lifetime of 100000 hours.Easy to install, use double-sided adhesive can be attached to the display original LCD gr00ve, or elsewhere.InstallationIf your monitor is using a inverter, then this kit …
540mm 24 inch Adjustable Light LED Backlight Kit Upgrade LCD Screen to LED Monitor ModuleRead More
DC 4.2V 1200mA Smart Charger 4 Slots Fast Charging for 18650 Li-ion Battery
$30.36AC/DC AdaptersAdd to cartSpecifications1.Plug:US (We will sent you a adapter according to you country)2.Charging Cell Type:18650 Li-ion (NOT INCLUDED)4.Rechargeable Battery Qty:45.Input Voltage:AC100-240V 47/63HZ6.Output Voltage:DC 4.2V 1200mA7.With 4 LED indicators, intuitive display the charging state8.Short-Circuit Protection,High temperature resistance,corrosion resistanceNote:please pay attention to the positive and negative,put your battery in the right place or it may burn.Package Included1 x Smart …
DC 4.2V 1200mA Smart Charger 4 Slots Fast Charging for 18650 Li-ion BatteryRead More
Reviews
There are no reviews yet.