New SCULPFUN S6 30W Laser Engraving Cutting Machine Wood Acrylic Laser Cutter High Precision 410x420mm Carving Area Full-metal Structure Quick Assembly Design DIY Desktop Laser Engraver Cutter
$546.74
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1.Upgraded high-power laser:The latest 5.5W laser power fixed-focus laser, which has an ultra-fine 0.15mm laser focus. It combimes both precision engraving and high-energy cutting. It can cut 12mm thick wood and acrylic, engrave painted stainless steel, ceramics and stones.
2. New eye protection design:The laser filter cover filters 98% of the ultraviolet light to eye, You and the people around you can watch laser engraving without wearing goggles. The cover also prevents animals grabing the laser spot.
3. Fast focusing design:S6 combined fixed focus laser and sliding design . You only need to slide the laser and tighten the screw to complete the focusing.
4. Solid and quick assembly structure design:The all-metal structure design makes the machine more solid, and improve the accuracy of engraving. The whole structure is designed for quick installation, it usually takes 10-20 minutes to finish installation.
5. Widely compatibility:The machine works well with various engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, engraving file supports JPG, PNG, DXF, SVG, G-code, NC, BMP, etc.
6. Square measuring ruler axis:X-Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects . The 410x420mm large engraving area can meet various engraving needs.
7. Safety design:There is a power switch on the machine for emergency power off. Fixing holes are reserved on the four feet and the body to fixi the machine and the data cable.
Product information
Product modelSCULPFUN S6 30W
Engraving size410x420mm
Engraving materialWood, paper, cardboard, plastic, white, PCB board, aluminum oxide, black-painted metal/ceramic
Cutting materialCardboard, fabric, wood board, bamboo, acrylic, plastic board
Total machine power30W
Laser output optical power5.5-6W
Laser wave length455±5nm
Engraving accuracy0.01mm
Focusing methodFixed focus laser + sliding device
Laser protective coverThe light filter cover on the laser protects the user’s eyes and prevents animals grabing the laser spot
Operating softwareLaserGRBL, LightBurn, LaserGRBL, LightBurn, Benbox, GrblController,
LiteFire, support Windows system.
Supported file formats NC, BMP, JPG, PNG, DXF and other image formats.
Data transmission methodUSB connection
Power supplyInternational universal standard power
input:100-240V AC, 50/60HZ
output:12V 5A
Equipment net weight3.0kg
Package weight4.4kg
Packing size615x345x130mm
CertificationCE, FCC, RoHS, FDA
Package list
S6 30W engraving machine packing list
1 xX axis assembly
1 xControl box module set
1 xLaser module set
1 x12V 5A power adapter
1 xPower adapter
1 x:USB cable
2 x:X shaft
2 x:Y shaft
3 x:Support feet
Step 1~5 Screw installation package
1 x:T-shaped M5 screwdriver
1 x:L-shaped M4 screwdriver
1 xL-shaped M3 screwdriver
1 x8-10mm nut wrench
1 xbrush
1 xLaser goggles
1 xA4 size steel desktop protection pad
2 xbelt
2 x10x10cm wood chip 3mm thickness
10 xTie
Note
For detailed machine instructions, please refer to the manual for parameter settings.
When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles.
Please do not touch the laser emitter with your hand, or it may burn your hand.
Please avoid strong impact on the machine.
Children under 14 are not allowed to use this product and children over 14 need adult supervision.
The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.
Weight | 0.00506 kg |
---|
Customers Also Viewed
Multiple Car Toys Magnetic Puzzle Box Book Educational Book Kids Learning Gift
$52.64MathematicsAdd to cartPackage included10 x Card76 x MagnetsFeatures1.Developing kids’ intelligence.2.Teaching kids to know more words.3.Easy for storage.SpecificationsColor:MulticolorMaterial:Paperboard, MagnetismSize:30x4x21.5cm
Basic Starter Kit UNO R3 Mini Breadboard LED Jumper Wire Button with Box for Geekcreit for Arduino – products that work with official Arduino boards
$18.62Module KitsAdd to cartDescriptionsPerfect for Shield Prototyping and TestingPlastic housing, metal contact clipsAccept wire with diameter 20-29AWGVolatge/current:300V/3-5A400 tie-point2 Power Lanes, Tie-point 1001 Double-strip, Tie-point 300Solderless Breadboard Size:82x55x8.5mmPackage included1 x Uno R3 Development Board1x 400 hole Breadboard10 x 220Ω resistor 5% carbon film10 x 1k resistor 5% carbon film10 x 10k resistor 5% carbon film10 x 100k resistor 5% …
3pcs ESP32-S WiFi + Bluetooth ESP32S Serial to WiFi Dual Antenna Module
$29.27Smart ModuleAdd to cartDescriptionThe main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and computing power of up to 600DMIPS.Default 32Mbit SPI Flash, 520KB SRAMSupport SoftAP and Station modeUltra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleSupport UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.Support for firmware upgrade (FOTA)Antenna supports onboard antenna or IPEX block outputPackage includes3 x Wifi module
Geekcreit 433MHz DC 12V 10A Relay 1CH Channel Wireless RF Remote Control Switch Transmitter with Receiver
$15.30Smart ModuleAdd to cartIf you need more Transmitter, please buy Product ID:1215079>>>Manual:Click here to openFeaturesEasy to install and easy to carryWith a slidable cover on the remote controlWith a hook on the remote controlUse Learning coding, stable and reliableThe wireless signal can pass through walls, floors and doorsYou can turn on or turn off the receiver with transmitter …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStream
$56.69Electrical Pump & ValveAdd to cartFeature*CO2 Refill Adapter is used to fill CO2 into your Sodastream tank.*Adjustable valve pin ensures compatibility with any cylinder valve variation.*Easy to install and use.*Made of high quality metal, high hardness and durable.Specification*Material:Metal*Color:Silver (As Pictures Show)*Inner Thread:TR21-4*Outer Thread:W21.8-14Package Contents1*CO2 Refill AdapterNotes:The real color of the item may be slightly different from the pictures shown on …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStreamRead More
30pcs 2.5-5.5V TTP223 Capacitive Touch Switch Button Self Lock Module
$15.15Other Module BoardAdd to cartFeatures 1. Size:15*11mm 2. Power:2.5-5.5V 3.Trigger setting mode:(1->Short;0->No Short) AB=00:No-lock High TTL level output; AB=01:Self-lock High TTL level output; AB=10:No-lock Low TTL level output; AB=11:Self-lock Low TTL level output; Package included 30 x 2.5-5.5V TTP223 Capacitive Touch Switch Button Self-Lock Module For
NE555 Pulse Module LM358 Duty and Frequency Adjustable Square Wave Signal Generator Upgrade Version
$6.55Test & Measuring ModuleAdd to cartFeature1. Used as a square wave signal generator to generate square wave signals for experimental development.2. Used to generate a square wave signal that drives the stepper motor driver.3. Generate adjustable pulses for use by the MCU.4. Generate adjustable pulses to control the associated circuitry.Description1. Size:3.5CM * 4.6CM1. The main chip:LM358;2. Input voltage:5V-12VDC.3. Input current:≥100MA;4. …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module Kit
$13.73DIY Electronic KitsAdd to cartFeatureModel:AUL-10Supply voltage:DC9V-12VAudio input:0~1.5VrmsPCB size:66 x 28mm (L x W)Light row size:62.5 x 5 x 10.7mm (L x W x H)Two indication modes:bar indication and fire spot indication (Realized by MOD short-circuit point)Lamp row offers two kinds of vertical and horizontal installationTin-treated solder padsNote:Before power on, please confirm the polarity of the power supply is correct …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module KitRead More
Reviews
There are no reviews yet.