New SCULPFUN S6 30W Laser Engraving Cutting Machine Wood Acrylic Laser Cutter High Precision 410x420mm Carving Area Full-metal Structure Quick Assembly Design DIY Desktop Laser Engraver Cutter

Features
1.Upgraded high-power laser:The latest 5.5W laser power fixed-focus laser, which has an ultra-fine 0.15mm laser focus. It combimes both precision engraving and high-energy cutting. It can cut 12mm thick wood and acrylic, engrave painted stainless steel, ceramics and stones.
2. New eye protection design:The laser filter cover filters 98% of the ultraviolet light to eye, You and the people around you can watch laser engraving without wearing goggles. The cover also prevents animals grabing the laser spot.
3. Fast focusing design:S6 combined fixed focus laser and sliding design . You only need to slide the laser and tighten the screw to complete the focusing.
4. Solid and quick assembly structure design:The all-metal structure design makes the machine more solid, and improve the accuracy of engraving. The whole structure is designed for quick installation, it usually takes 10-20 minutes to finish installation.
5. Widely compatibility:The machine works well with various engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, engraving file supports JPG, PNG, DXF, SVG, G-code, NC, BMP, etc.
6. Square measuring ruler axis:X-Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects . The 410x420mm large engraving area can meet various engraving needs.
7. Safety design:There is a power switch on the machine for emergency power off. Fixing holes are reserved on the four feet and the body to fixi the machine and the data cable.
Product information
Product modelSCULPFUN S6 30W
Engraving size410x420mm
Engraving materialWood, paper, cardboard, plastic, white, PCB board, aluminum oxide, black-painted metal/ceramic
Cutting materialCardboard, fabric, wood board, bamboo, acrylic, plastic board
Total machine power30W
Laser output optical power5.5-6W
Laser wave length455±5nm
Engraving accuracy0.01mm
Focusing methodFixed focus laser + sliding device
Laser protective coverThe light filter cover on the laser protects the user’s eyes and prevents animals grabing the laser spot
Operating softwareLaserGRBL, LightBurn, LaserGRBL, LightBurn, Benbox, GrblController,
LiteFire, support Windows system.
Supported file formats NC, BMP, JPG, PNG, DXF and other image formats.
Data transmission methodUSB connection
Power supplyInternational universal standard power
input:100-240V AC, 50/60HZ
output:12V 5A
Equipment net weight3.0kg
Package weight4.4kg
Packing size615x345x130mm
CertificationCE, FCC, RoHS, FDA
Package list
S6 30W engraving machine packing list
1 xX axis assembly
1 xControl box module set
1 xLaser module set
1 x12V 5A power adapter
1 xPower adapter
1 x:USB cable
2 x:X shaft
2 x:Y shaft
3 x:Support feet
Step 1~5 Screw installation package
1 x:T-shaped M5 screwdriver
1 x:L-shaped M4 screwdriver
1 xL-shaped M3 screwdriver
1 x8-10mm nut wrench
1 xbrush
1 xLaser goggles
1 xA4 size steel desktop protection pad
2 xbelt
2 x10x10cm wood chip 3mm thickness
10 xTie
Note
For detailed machine instructions, please refer to the manual for parameter settings.
When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles.
Please do not touch the laser emitter with your hand, or it may burn your hand.
Please avoid strong impact on the machine.
Children under 14 are not allowed to use this product and children over 14 need adult supervision.
The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.