4 Small Blades Heat Powered Wood Stove Fan for Log Wood Burner Fireplace Eco Fan
$109.34
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1.Save Energy and Money
–This stove fan runs without battery or electricity. Instead, it is powered by transforming heat into energy. There is a bimetallic strip at the bottom of the base which converts a fraction of the heat passing through it into motion. When the temperature reaches 50 centigrade, the fan starts to work.
2.Self-starting and Self-regulating
–Start automatically when reached its temperature of 50 centigrade (needs half or one minute to preheat). Higher the temperature, faster it starts to spin. When the temperature exceeds 320 centigrade, please take your fan away from stove. The stove fan adjusts its speed with the stove temperature. The higher temperature, the blades spin faster, and the more hot air pumps into the room. When the blades slow down, it means you should stoke the stove. Fuel costs up to 17%, no battery or power supply required, more environmentally friendly.
3.Whisper Quiet and No Assembly
–The blade design and no motor means the stove fan is nearly silent, able to use in a quiet room and unnoticeable against background noise such as TV. It is ready to use out of the box with no assembly.
4.Overheating Protection
–When the temperature reaches 360℃, the metal shrapnel at the bottom will lift the fan to protect the fan motor from damage.
Specification
Color:white
Materials
main unit and blades:aluminum alloy
Blade number:4
Speed:1000pm
Noise:15-18DB
Wind speed:about 2.1m/s
Air Flow:203CFM
Size:As shown in the figure
Net Weight:0.81kg
Power:Thermoelectric module
Operating temperature range:50 ℃ to 360 ℃
Note
1. Marble countertops do not conduct heat, so fireplace fans cannot be used. The fireplace and its countertop are insulated and cannot conduct heat, so fireplace fans cannot be used.
2. The mesa is hollow and sparks will burn out. You can’t put the fireplace fan directly on the fireplace. You should put an iron plate on it and then put the fan on it.
Package Included
1 * Stove Fan
Weight | 0.804 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.