W1411 12V 24V 220V 10A LED Digital Temperature Controller thermostat Control Switch Sensor
$30.36
Voltage 220V / Voltage 24V / Voltage 12V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
This product uses single-chip control system + high-precision temperature probe, temperature control performance and temperature control accuracy is superior to similar products. This product three windows design, start value and stop value real-time display, and with intermittent work, timer switch machine and other functions, in the greenhouse cultivation, aquatic animal husbandry, room temperature control can be widely used, it is a good helper at home!
Specification
Temperature range:-55 ~ +120℃
Temperature measurement accuracy:± 0.3℃
Resolution:0.1℃
Temperature range:-19 ~ 99℃
Control accuracy:1℃
Temperature probe:1 meter waterproof probe
Supply voltage:220V
Applicable environment:-25 ~ 55℃ Humidity 20% -85% (no condensation)
Output type:10A Relay output
Usage
1. The product of the plug plug in the home socket on the screen shows the temperature that the power has been properly connected.
2. The temperature control probe into the need to control the temperature of the place, according to the need to set the start and stop temperature.
3. The heating or cooling equipment power plug plug in the thermostat socket can be achieved on the temperature control.
Operating Instructions
If the temperature is in the interval after power-up, the output will be activated immediately and the set value will be stopped.
Start temperature
For example, want to control the hot water to 60℃ to stop, to 45℃ and then start, then the start value should be 45, stop the value of 60
Start temperature> Stop temperature:Cooling mode
For example, when the summer wants to control the greenhouse above 35 degrees to start the ventilation fan, when to stop at 32 degrees, then the start should be set to 35, stop setting to 32
SET:function key / switch key
In the boot state, press and hold SET 3 seconds to shut down, if the power off after the shutdown is still kept off
In the shutdown state, press SET once to boot, boot if the power is still turned on
Press the SET once to switch between F-1 and F-3 in the normal temperature control state
F-1 Intermittent Operating Mode Unit Minute Left Start Minute Right Stop Minute
F-2 timer off the left hour the right minute minutes up to 99 hours 59 minutes
F-3 regular boot left hour right minute minutes up to 99 hours 59 minutes
Temperature correction:unplug the thermostat plug and hold the SET power on, enter the temperature correction function, the screen display –000 – can be corrected before the temperature on the basis of addition and subtraction temperature, the maximum range of -9.9 ~ +99, calibration completed Rear
Real-time temperature = pre-correction temperature value + correction value
Press and hold (start + -) to enter the self test function
Press and hold (stop + -) to turn on the factory settings
Restore the factory
If you set the error or set the confusion can hold down the stop 2 keys to start the factory settings.
Screen display 88-888-88, buzzer flute soon, recovery is complete.
Default start 25, stop 40 F-1 01-10 F-2 00-30 F-3 00-30 Correction = 000
Troubleshooting
1. power does not respond, the screen does not shine
Check whether the outlet is electrically, you can use the same plug of other electrical appliances to check, if there is electric check the thermostat is turned off, you can press a SET boot
2. the screen can be displayed, but can not reach the temperature control function
If the temperature is set to the right, but the start does not start, the stop does not stop it is possible to start and stop the set value error, please drop the setpoint and stop value
3. the temperature changes beyond the control range
The controller for the bit control, that is, when the red light is on, stop when the green light, if the control process changes the light is right, but the temperature overshoot indicates that the thermostat is good, you can reduce your Heating / cooling power can be resolved
4. temperature with the actual deviation
If you feel that the current temperature is 30 degrees and the thermostat shows 29.6, you can enter the temperature correction, hold down the SET start temperature to the school can be adjusted to 0.4, if the real-time temperature of 31.2, you Think it is 30 can be reduced correction value adjusted to -1.2 so you can get the temperature you want
The use of Note
This product must be read carefully for the first time
1. this product is three plugs must be with the ground socket
2. the thermostat host is not waterproof, pay attention to avoid water, is strictly prohibited into the bathroom or outdoor use
3. the use of power is strictly prohibited than the product calibration power or cause permanent damage and danger
4. the actual temperature control should pay attention to observe whether the correct implementation of temperature control can leave
Package included
1 x XH-W1411 Temperature Controller Thermostat Control Switch
Weight | 0.076 kg |
---|
Customers Also Viewed
Geekwrom HD 3.5 inch TFT Display Shield 800×480 for Raspberry Pi 3B 2B + Acrylic Matching Case Kit
$121.30Raspberry Pi & Orange PiAdd to cartGeekwrom HD 3.5 Inch TFT Display Shield 800×480 For Raspberry Pi 3B 2B + Acrylic Matching Case KitHD 3.5 Inch TFT Display Shield 800×480 For Raspberry Pi 3B 2BFeatures– Demensions:85mm*56.5mm;– Resolution:800 x 480, 3.5 inch;– 267ppi High PPI display screen;– 11ms High Response Time(more than 60 fps);– 160° Wide Viewing Angle;– 900:1 High Contrast Ratio;– …
intelligent Screen Solar Pure Sine Wave Power inverter 1200W-6000W DC To AC 110V 120V Converter
$121.49InvertersAdd to cartWatt 1200W Voltage 12V Type Single digital display / Watt 2200W Voltage 12V Type Single digital display / Watt 3000W Voltage 12V Type Single digital display / Watt 3000W Voltage 24V Type Single digital display / Watt 3000W Voltage 48V Type Single digital displ
500W Aquarium Submersible Stainless Steel Heating Rod Adjustable Heater
$48.59Solar CollectorsAdd to cartDescriptionMaterial:Stainless SteelColor:SilverPlug:US PlugVoltage:220-240V 50HzWattage:500WTemperature range:16-32°CCable Length:120cm/47.24inch(appr.)Heating Rod Length:41cm/16.14inch(appr.)FeaturesMade of stainless steel material, anti-rust, useful and durable.Double insulation & waterproof.Keep the water temperature steady.Suitable for aquarium:500L (for reference only).Simple adjustment and easy to read temperature indicator.Easy to install with 2 strong suckers (mounting distance of 2 suckers is about 9.5cm).Adjustment knob allows you to adjust the …
500W Aquarium Submersible Stainless Steel Heating Rod Adjustable HeaterRead More
5pcs JoyStick Module Shield 2.54mm 5 pin Biaxial Buttons Rocker for PS2 Joystick Game Controller Sensor
$14.30Other Module BoardAdd to cartFeaturejoystick joysticks standard interface module electronic building blocks and 2.54mm pin interface leads.Phillips is a two-way rocker 10K resistor, with the joystick in a different direction, tap the resistance vary. This module uses a 5V supply, the original state X, Y readout voltage of 2.5V or so, when pressed with the direction of the arrow, …
4Pcs Geekcreit Ultrasonic Module HC-SR04 Distance Measuring Ranging Transducers Sensor DC 5V 2-450cm
$9.83Sensor & Detector ModuleAdd to cartDescriptionWorking Voltage:5V(DC)Static Current:Less than 2mA.Output Signal:Electric frequency signal, high level 5V, low level 0V.Sensor Angle:Not more than 15 degrees.Detection Distance:2cm-450cm.High Precision:Up to 0.3cmInput Trigger Signal:10us TTL impulseSignal:output TTL PWL signalMode of connectionVCCtrig(T)ech0(R)GNDUse MethodSupply module with 5V, the output will be 5V while obstacle in range, or 0V if not.The out pin of this module is …
1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier for Ham Radio
$50.29RF amplifierAdd to cartApplicationBroadband RF power amplifier for all types of wireless applications, FM shortwave radios remote control toys, digital radio, etc., enter 1 milliwatt (0DBM) maximum output of 3 watts, 15V voltage supply, broadband work 1MHZ to 700MHZ can be work. As a result of well-designed, low end that can reach 35DBM (3W), at 500M, the output …
1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier for Ham RadioRead More
Reviews
There are no reviews yet.