PAM8403 DC5V 2x3W Digital Amplifier Module Dual Channel Power Stereo Amplifier Board
$4.60
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Supply voltage:DC 2V-5.5V
Distortion rate:1 (%)
Signal to noise ratio:90 (db)
Input impedance:2
Output impedance:4 (Ω)
Rated power:3 (W)
Frequency response:100Hz-15KHz
Efficiency:>90%
Number of channels:two channels
PCB Size:31x19mm
Note
1. The power supply voltage must not exceed the limit voltage of 5.5V. It is forbidden to reverse the power supply to avoid permanent damage to the chip.
2. This amplifier chip has built-in high-gain electronic volume control. Please adjust the volume to the middle position during debugging.
3. The maximum instantaneous dynamic current of this power amplifier board can reach 1.2A. It is strongly recommended to use a voltage of 5V and a power supply with a good filtering performance of 1A or more.
4. The speaker must be properly installed. Do not test directly with the speaker without the box, otherwise the ideal effect will not be achieved.
5. The output of this circuit is the BTL drive mode of the coms tube. The negative poles of the left and right speakers cannot be connected together, that is, the four lines connected to the speaker are completely independent and are not allowed to be shared.
Package Included
1 x 3W Stereo Amplifier Board
Weight | 0.006 kg |
---|
Customers Also Viewed
29Pcs/Set 24/29 Laboratory Glassware Kit 25/50/100/250/500mL Flask Lab Chemistry Glass Ground Joint Distillation Separation
$261.21Lab ChemicalsAdd to cartDescription1. Be made of G3.3 borosilicate glass.This borosilicate glass with low linear coefficient of expansion is ideal choice for fabricating laboratory glassware.Annealing Point:560℃Linear Coefficient of Expansion:32*10-7/℃Softening Point:820℃2. The thickness of the flask wall is 2.5mm.3. All of the joint is 24/29,This kit has 18 kinds of parts as belowNo.:Specification:Part name:Quantity1:24/29:Claisen adapter:12:24/29:75°Distillation adapter:13:24/29:Vacuum take-off adapter:14:24/29:Inlet/Thermometer adapter:15:24/29 …
Mini DC Vibration Motor Module 8800 RPM High Frequency Vibration Single-direction Rotation
$10.11Other Module BoardAdd to cartDescription Vibrator Motor is consist of an N20 Motor and a metal eccentric wheel. This N20 motor is has a 5V supply voltage. The output shaft has a rotational speed of 8800 RPM. Specifications can be seen below. With this product, you can implement a vibration function to your application. These days miniature vibrating motors …
Mini DC Vibration Motor Module 8800 RPM High Frequency Vibration Single-direction RotationRead More
D1 R2 V2.1.0 WiFi Uno Module Based ESP8266 Module Geekcreit for Arduino – products that work with official Arduino boards
$13.11Motherboard & Development BoardAdd to cartGithub:Click here to openMore information:Click here to openDescriptionBased on the ESP-8266EX.Compatible, you can use it on IDE.NodeMcu Compatible11 Digital I/O pins1 Analog Input pinOTA — Wireless Upload(Program)On board switching power supply — Max 24V input, 5V 1A outputWhat’s new about V2.1.0Use BRT (Bias Resistor Transistor), easier into flash mode.Optimize the circuit, the system is more …
1.54 inch Electronic Flexible ink Screen Display Module Black and White Dual Color e-Parper OLED
$39.35Display ScreenAdd to cartFeatureWorking voltage:DC 5VWorking current:150mAMaximum power:0.75WDisplay color:black and whiteDisplay size:1.54 inch/2.13 inchDisplay resolution:200*200/250*122Interface type:8pin header with 2.54mm pitchOperating temperature range:-20C to +60CPositioning hole size:diameter 3mmHeight:7mmPackage includes1 x Display board
AD/DA Extension Board PCF8591 GPIO 3.3V 5V for Raspberry Pi 4B/3B+/3B
$34.43Raspberry Pi & Orange PiAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.SpecificationsSize:65*56*24mm Weight:27gPins:Raspberry Pi GPIOOutput Voltage:3.3V/5V (IO VCC:3.3V)Analog Port-Input:4 Analog inputs are converted to Digital AD input-Output:Digital input simulated to Analog DA outputDigital Port:27 Digital IOI2C:3 Way I2C(BCM2,3)Serial Port:1 Way Serial Port(BCM14,15)SPI:1 Way …
AD/DA Extension Board PCF8591 GPIO 3.3V 5V for Raspberry Pi 4B/3B+/3BRead More
Wooden Christmas Advent Calendar Christmas Elk Decoration Fits 25 Circular Chocolates Candy Stand Rack
$21.57ChemistryAdd to cartSpecificationName:Wooden Christmas CalendarSize:Approximately 40x35cm (15.7X13.8in)Material:WoodenFeatureIt is sent flat packed, simply slot the stand together and place the tree into the stand and fill with your chocolates.Package Included1 x Christmas Calendar (The Chocolate is NOT included)
3PCS USB Microphone for Raspberry Pi
$27.14Raspberry Pi & Orange PiAdd to cartFeature1. Sensitivity:-47dB ÷ 4dB2. Sensitivity reduce:-3dB at 1.5V3. Working Voltage:4.5V4. Frequency response:100 ~ 16kHz5. SNR:More than -67dB6. Cable length:0.7-0.9MThe effective distance of 2 meters or morePackage included3xUSB Microphone For Raspberry Pi
Reviews
There are no reviews yet.