20/25/30mm Dia Reflective Mirror Reflector Si Coated Gold Silicon Laser Reflection Lens for CO2 Laser Cutting Engraving Machine
Size #3 / Size #2 / Size #1 / Size #4 /
Shipping:Standard Shipping about 10-25 business days
Silicon Laser Reflection Len is widely used in laser processing for example, cutting, drilling, sculpture, engraving and laser system.
Diameter:20mm / 25mm / 30mm
Thinckness:1.5mm / 3mm
1. Withstanding high power density.
2. Compact and wearable film coating.
3. Film is solid, resistant to wipe
4. Double-side film,the filterability can reach 99%.
5. Widely used in laser processing for example, cutting, drilling, sculpture,engraving and laser system.
6. Usually a complete beam path outside the laser tube requires three reflect mirror and a focus lens.
7. Laser will loss when it travels, so the laser machine need a higher reflectivity mirror.
8. Good Reflecive Ability, The Reflection of Cloudray Mirrors can Reach to 99.2%.
9. Gold-Plated Coating Film,More Durable.
10. Silicon and Molybdenum is the main material of reflect mirror. The molybdenum mirror does not need coating film , they are able to work in harsh environments.
11. Silicon reflect mirror is coated with gold film, to improve the reflectivity of the mirror, then to improve the efficiency of the machine.
12. For Molybdenum mirror, there is no coating on the surface, but the reflection is low, maybe 80%.
13. For silicon mirror, it is coated with dielectric or golden film. Golden mirror is better than Mo mirror, as the reflection is higher
1 x Laser Si Reflective Mirror
Customers Also Viewed
50W Solar Panel Kit MPPT Solar Charge Cotroller 12V Battery Charger 10-100A LCD Controller for Phone Caravan Van Boat$58.71
3Pcs TDA2030A Subwoofer Amplifier Board 2.1 3-Channel Compatible LM1875$52.68Amplifier BoardAdd to cart
The main parametersLeft and right channels:TDA2030Ax2. Power:18W + 18W, suggested 2.5-4 inches, 4-8 ohms 10-30W of full-range speakers.Bass output:TDA2030Ax1, Power:18W (≤250HZ) suggested 5-8 inches, 4-8 ohms 20-50W woofers.Power:AC double AC9-15V transformer, we recommend double AC12V power is above 25W (2A) transformer.PCB Materials:FR-4 fiberglass board, thickness:1.6mm.Board Size:79 x 95 x 60mm (length x width x height), …
3pcs TEC1-12715 12V Heat Sink thermoelectric Cooler Peltier Plate Module$32.04Electronic Accessories & SuppliesAdd to cart
40 x 40mm TEC1-12715 12V Heatsink Thermoelectric Cooler Peltier Plate ModuleDescriptionSolid state, vibration free, noise-freeSimple to install and operateThe hot surface need to be good heat sinkSpecificationProduct name:thermoelectric cooler plate moduleModel:TEC1-12715Color:whiteCouples:127Voltage:12VUmax:15.4VImax:15AMax power consumption:231WTmax:70°CQcmax T=0(W):137WSize:40 x 40 x 3.3mmWeight:50gPackage included3 x TEC1-12715 cooler plate module
5Pcs UNO R3 ATmega16U2 AVR Development Module Board$72.09Motherboard & Development BoardAdd to cart
Note:This version does not includes USB cableUNO R3 DescriptionThis UNO R3 board is 100% compatible with original one, now it has perfect quality and performance .This is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. It can be used to develop stand-alone interactive …
ESP32-CAM WiFi + bluetooth Development Board ESP32 with FT232RL FTDI USB to TTL Serial Converter 40 Pin Jumper$34.98Motherboard & Development BoardAdd to cart
[ESP32-CAM Wireless Module]Description1. ESP32-CAM is a WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.2. ESP integrates WiFi, traditional bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip …
BESTEP 6 Channel 12V Relay Module Low Level Trigger with Optocoupler Isolation$14.34Relay ModuleAdd to cart
DescriptionMaximum load:AC 250V/10A, DC 30V/10A.The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA.Working voltage is 12V.Each channel of the module can be set up by high jumper or low level trigger.Fault tolerant design, even if the control line is broken, the relay will not act.Power indicator (green), 6 relay status indicator (red).The …
3pcs DIY Electronic Kit Electronic Candle Making Kit Ignite Blow Control Simulation Candle Electronic Training DIY Parts$10.04DIY Electronic KitsAdd to cart
DescriptionKit Name:Analog Electronic CandleBoard size:42mm*33mmCircuit board material:glass fiberWorking voltage:DC 5VBoard function:simulate ignition, blow candles, fun, and realize the function of electronic candle.The kit needs to be soldered and installed by the buyer.Package included3 x Simulation Candle Electronic Training DIY Parts