10N Spring Dynamometer Balance Scale Dynamometer forcemeter Tester 10sile Pressure Gauge
$30.36
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
10N Spring Dynamometer Used for Measuring Force and Weighing Objects in Physical Mechanics Teaching Experiment
Specification
Material:Plastic + Metal
Size:330*60*55mm
Measurement Range:10N
Component:Fatigue Resistant Spring, Pointer, Regulator, Hook, Pressure Table and Scale Plate
Features
1. The scale plate is in high resolution, which makes it easy to recognize the reading.
2. Suitable for physical mechanics teaching and experiment.
3. Easy to operate and enough light to carry.
Instructions
1. Check whether the pointer is aligned to zero before using it. If not, turn the top adjusting nub.
2. When measuring force, you are supposed to reverse the small hook and the hook ring to the side, and then you can recognize the reading when the bearing platform can be stressed.
Notice
1. The force measured should be within 10N. Not to exceed the calibration limit.
2. Keep it under dry condition, not contacting with acid and alkali so as not to corrode the instrument.
Package Included
1 x Dynamometer
Weight | 0.147 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.