5Pcs 4S 14.8V 16.8V 18650 Lithium Battery Protection Board Startable Electric Drill 40A Current
$26.15
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Scope of application:Lithium batteries with nominal voltages of 3.6V and 3.7V
Product size:46*60*3.4mm
Product weight:10.3g
Charging voltage:16.8V-18.1V
Continuous discharge current (upper limit):40A (If the heat dissipation environment is not good, please reduce the load current to use)
Continuous charging current (upper limit):20A
Applicable electric drill:electric drill with starting current below 80A and power below 135W.
Note
1. To start the electric drill successfully, you need 4 power batteries of 15C-20C, or 8 power batteries of 10C-15C (ordinary 18650 cannot start the electric drill!! !).
2. Wire 0V, 4.2V, 8.4V, 12.6V, 16.8V strictly according to the diagram, and do not intentionally short-circuit.
3. For loads with brushed motors, try to connect a non-polar capacitor in parallel with the positive and negative terminals of the motor (withstand voltage above 25V, capacity 10uF-100uF) to prevent the reverse peak voltage generated by the motor from interfering with the protection board or breakdown MOS tube.
4. When connecting 4 sets of batteries in series, please ensure that the voltage of each set of batteries is the same. If they are not the same, please charge each set of batteries separately and use them in series. . . During the discharge test, the battery with the faster voltage drop is a bad battery.
Package Included
5 x 4S 14.8V 16.8V 18650 Lithium Battery Protection Board
Weight | 0.065 kg |
---|
Customers Also Viewed
3pcs 9V 1A Power Supply Adapter US Plug 2-Flat-Pin for
$19.71Electronic Accessories & SuppliesAdd to cartDescription 2-flat-pin US plug for Works with most devices that use a 9V adaptor and less than 1A of power Specification Color:Black Input:100~240V AC, 50/60Hz Output:9V DC, 1A Connector size:5.5 x 2.1mm Cable length:90cm Dimensions:2.91 x 1.57 x 1.06inch (7.4 x 4 x 2.7cm) Package included 3 x 9V 1A power adapter
Prototype Board 400 Hole Breadboard + 65pcs Breadboard Jump Cable
$10.92Electronic Accessories & SuppliesAdd to cartPrototype Board 400 Hole Breadboard + 65pcs Breadboard Jump CableFeatureThis is the Prototype board Electronic deck + 65pcs Breadboard tie line Wire cable.Ideal for high frequency and low noise circuitsDimension:8.3cm x 5.5cm x1.0cmWire size:Suitable for 20-29 AWG(0.3-0.8mm) wiresJump Cable Wires65Pcs Mixed Color Male to Male Solderless FlexibleBreadboard Jump Cable WiresThis a high quality 65 piece …
Prototype Board 400 Hole Breadboard + 65pcs Breadboard Jump CableRead More
20pcs CH340 3.3V/5.5V USB To TTL Converter Module CH340G STC Download Module Upgrade Brush Board
$35.30Converter BoardAdd to cartFeaturesBuilt-in USB to TTL Transfer chip.Designed to be used for USB to TTL electronic projects.TTL interface output, easy to connect to your MCU.Status LED.Dual 3.3V and 5V Power output, work with 3.3v and 5v target device.Size:55mm x 16mmServer 2008/Win7/Win8 32 bits / 64 bits1. Support WINDOWS 98 / ME / 2000 / XP/Server 2003/VISTA /2. …
140 DC 12V LED PIR Body infrared Auto Motion Sensor Switch on/off Strip
$13.11Electronic Accessories & SuppliesAdd to cartFeatureHigh sensitivity, easy for installing.Gray cable is positive electrode.White cable is negative electrode.Widely used on the Motion-activated lighting, LED strips security system, automatic sensory device and more.The sensor is not waterproof; don’t install it in any place with heavy water and humidity.Specification-Switch mode:PIR sensor-Color:Black+White-Material:Plastic-Size:As the picture shows-Operating voltage:3-12v-Load current:2A-Detecting range:140°-Detecting distance:1~3m-Delay time:15sAttention1. Don’t install in …
140 DC 12V LED PIR Body infrared Auto Motion Sensor Switch on/off StripRead More
Reviews
There are no reviews yet.